Extron DMP 128 Plus C manual

Extron DMP 128 Plus C
8.4 · 1
PDF manual
 · 188 pages
English
manualExtron DMP 128 Plus C
DMP 128 Plus • Configuration Tools 97
5
Hold Button — Click this button during a call to put the call on hold. Click it again to
take a call off hold.
6
Number Field — Displays the number dialed with the dialer keypad. Alternatively, click
this field and use the keyboard to dial a number.
7
Dialer Keypad — Contains software buttons for dialing when not in an active call and
sending DTMF signals to the far end while in an active call. The green “off hook” button
places a call after a number is dialed. The red “on hook” button ends a call on the
selected line and appearance. The Clear button clears the number field.
8
Auto Answer Configuration — Contains a checkbox and Ring Duration field.
Select the checkbox to enable auto answer on all appearances of the selected line
(unchecked by default). Use the Ring Duration field to enter the amount of time in
seconds before the line auto answers.

Placing a Call with the Phone Dialer

NOTE: VoIP lines must be registered with the call server via the DMP 128 Plus VoIP web
page (see DMP 128 Plus VoIP Web Page on page167) and assigned to an Aux
input and output (see Aux Inputs on page43).
1. Select Tools>Phone Dialer. The Phone Dialer dialog opens.
2. Select a line using the Line buttons (see figure 165,
3
on the previous page).
3. Click New Call (
4
).
4. Enter the desired number or extension using the keypad (
7
). Alternatively, click the
number field (
6
) and type the desired number or extension using the keyboard.
5. Click the green “off hook” button on the keypad (
7
).
6. The appearance window (
2
) displays the status of the call.
7. Click Hold to place the call on hold. Click Hold again to return to the call.
8. Click the red “on hook” button to end the call.

Receiving a Call with the Phone Dialer

NOTE: VoIP lines must be registered with the call server via the DMP 128 Plus VoIP web
page (see DMP 128 Plus VoIP Web Page on page167) and assigned to an Aux
input and output (see Aux Inputs on page43).
1. Select Tools>Phone Dialer. The Phone Dialer dialog opens.
2. When a call is incoming, the corresponding Line button flashes red.
3. Click the Line button with the incoming call.
4. Highlight the appearance the call is on.
5. Click the green “off hook” button on the keypad.
6. Click the red “on hook” button to end the call.

Manual

View the manual for the Extron DMP 128 Plus C here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Extron DMP 128 Plus C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DMP 128 Plus C specifications

Below you will find the product specifications and the manual specifications of the Extron DMP 128 Plus C.

General
BrandExtron
ModelDMP 128 Plus C | 60-1512-01
Productnot categorized
EAN5711783372820
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
Number of inputs12 inputs
Features
Total Harmonic Distortion plus Noise (THD+N)0.01 %
Frequency range20 - 20000 Hz
Signal-to-Noise Ratio (SNR)115 dB
Input impedance10000 Ω
Housing colorGray
Housing materialMetal
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)29.4 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width442 mm
Depth241 mm
Height43 mm
Weight2040 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DMP 128 Plus C below.

What is the weight of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a weight of 2040 g.

What is the height of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a height of 43 mm.

What is the width of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a width of 442 mm.

What is the depth of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a depth of 241 mm.

Is the manual of the Extron DMP 128 Plus C available in English?

Yes, the manual of the Extron DMP 128 Plus C is available in English .

Is your question not listed? Ask your question here

No results