Extron DMP 128 Plus C manual

Extron DMP 128 Plus C
8.4 · 1
PDF manual
 · 188 pages
English
manualExtron DMP 128 Plus C
DMP 128 Plus • Configuration Tools 92

Date/Time

To set the date and time:
1. Click the Set Local button to sync the date and time
information with the date and time on the connected PC.
2. Set the time zone by using the Zone drop-down.
3. Use the Daylight Savings radio buttons to enter the
daylight saving region, or leave off (default).
-or-
1. Enter the desired date in the Date field. A drop-down
calendar is available for date selection.
2. Enter the desired time in the Time field by clicking on the
hours and entering the hour, then clicking on the minutes
and entering the number of minutes.
3. Set the time zone by using the Zone drop-down.
4. Use the Daylight Savings radio buttons to enter the
daylight saving region, or leave off (default).
NOTE: The information displayed in the Date/Time tab is static. In order to update the
information to reflect the current time, click Refresh.

Dante Device

This tab allows the DMP 128 Plus Dante settings to be configured within DSP configurator
without opening Dante Controller.
ATTENTION: It is essential that a Dante device be named immediately after it is
connected to the Dante network and before audio connections with other devices are
established. Existing connections are removed when a device is renamed.

Dante Device Name

A Dante device can be renamed to identify the device on the
audio network.
To assign the Dante device name:
1. Select Tools > Device Settings.
2. Use the arrows to navigate to the Dante Device tab
(see figure 160,
1
).
3. Click the Device name text box (
2
).
4. Enter a device name for the Dante interface.
5. Click Apply (
3
). A confirmation dialog box opens.
6. Click Yes, to confirm existing connections will be
removed after the name is changed.

Dante Device Network Settings

To configure Dante network settings:
1. Select the DHCP or Static IP radio buttons (
4
). If using DHCP, the DMP 128 Plus
Dante interface will be assigned an IP address by the DHCP server and Dante network
configuration is complete. If Static IP is selected, proceed to step 2.
Figure 159. Date/Time Tab
figure 159. Date/Time Tab in Device Settings Dialog Box
Figure 160. Dante Device Tab in
Device Settings Dialog
Box

Manual

View the manual for the Extron DMP 128 Plus C here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Extron DMP 128 Plus C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DMP 128 Plus C specifications

Below you will find the product specifications and the manual specifications of the Extron DMP 128 Plus C.

General
BrandExtron
ModelDMP 128 Plus C | 60-1512-01
Productnot categorized
EAN5711783372820
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
Number of inputs12 inputs
Features
Total Harmonic Distortion plus Noise (THD+N)0.01 %
Frequency range20 - 20000 Hz
Signal-to-Noise Ratio (SNR)115 dB
Input impedance10000 Ω
Housing colorGray
Housing materialMetal
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)29.4 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width442 mm
Depth241 mm
Height43 mm
Weight2040 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DMP 128 Plus C below.

What is the weight of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a weight of 2040 g.

What is the height of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a height of 43 mm.

What is the width of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a width of 442 mm.

What is the depth of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a depth of 241 mm.

Is the manual of the Extron DMP 128 Plus C available in English?

Yes, the manual of the Extron DMP 128 Plus C is available in English .

Is your question not listed? Ask your question here

No results