Extron DA 12V/6V DUAL EQ manual

Extron DA 12V/6V DUAL EQ
9.8 · 1
PDF manual
 · 22 pages
English
manualExtron DA 12V/6V DUAL EQ
DA AV EQ Series • Installation and Rear Panel
DA AV EQ Series • Installation and Rear Panel

Installation and Rear Panel

2-3
3. Mechanical loading — Mount the equipment in the rack
so that a hazardous condition is not achieved due to
uneven mechanical loading.
4. Circuit overloading — Connect the equipment to the
supply circuit and consider the effect that circuit
overloading might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this
concern.
5. Reliable earthing (grounding) — Maintain reliable
grounding of rack-mounted equipment. Pay particular
attention to supply connections other than direct
connections to the branch circuit (e.g., use of power strips).
Rack mounting procedure
To mount the distribution amplifier on a 6" deep or 9.5" deep
rack shelf,
1. If rubber feet were previously attached to the bottom of
the unit, remove them.
2. Mount the unit on the rack shelf, using two 4-40 x 3/16"
screws in opposite (diagonal) corners to secure it.
3. Install blank panel(s) or other unit(s) on the rack shelf.
4. Attach the rack shelf to the rack using the supplied bolts.
6" Deep Rack Shelf
Front false
faceplate
uses 2
screws.
1/2 Rack Width Front False
Faceplate
Use the 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
Mounting a DA AV EQ on a 6" deep rack shelf

Mounting the DA AV EQ Series

The DA AV EQ distribution amplifiers can be set on a table;
mounted on a rack shelf; or mounted through or under a desk,
podium, or tabletop.
The following optional mounting kits are available for the
DA AV EQ Series:
RSB 126 1U, 6" deep basic rack shelf (part #60-604-10)

RSU 126 1U, 6" deep universal rack shelf kit

(part #60-190-10)
RSB 129 1U, 9.5" deep basic rack shelf (part #60-604-01)

RSU 129 1U, 9.5" deep universal rack shelf kit

(part #60-190-01)

MBU 125 under-desk mounting bracket kit

(part #70-077-01)
MBD 129 through-desk mounting bracket kit
(part #70-077-02)
Tabletop use
Four self-adhesive rubber feet are included with the unit. For
tabletop use, affix one foot at each corner of the bottom of the
DA, and place the unit in the desired location.
Rack mounting
UL rack mounting requirements
The following Underwriters Laboratories (UL) requirements
pertain to the safe installation of the equipment in a rack.
1. Elevated operating ambient temperature — If the
equipment is installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack
environment may be greater than room ambient
temperature. Therefore, install the equipment in an
environment compatible with the maximum ambient
temperature (Tma = +113 °F, +45 °C) specified by Extron.
2. Reduced air flow — Install the equipment in a rack so that
the amount of air flow required for safe operation of the
equipment is not compromised.
2-2

Manual

View the manual for the Extron DA 12V/6V DUAL EQ here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Extron DA 12V/6V DUAL EQ or do you need help? Ask your question here

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DA 12V/6V DUAL EQ specifications

Below you will find the product specifications and the manual specifications of the Extron DA 12V/6V DUAL EQ.

General
BrandExtron
ModelDA 12V/6V DUAL EQ | 60-694-01
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Bandwidth150 MHz
Product colorBlack
Power
AC input frequency50 - 60 Hz
Input voltage100 - 240 V
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Inputs
BNC input ports2
Outputs
BNC output ports12
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DA 12V/6V DUAL EQ below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Extron DA 12V/6V DUAL EQ available in English?

Yes, the manual of the Extron DA 12V/6V DUAL EQ is available in English .

Is your question not listed? Ask your question here

No results