Extron AXI 44 AT manual

Extron AXI 44 AT
9.2 · 1
PDF manual
 · 45 pages
English
manualExtron AXI 44 AT
AXI 22 AT and AXI 44 AT • Dante Controller 29

Dante Controller Operation

Dante Controller is used for all network signal routing of transmitters and receivers for
Dante-enabled devices. The input and output channels of the AXI22AT and AXI 44 AT
are shown in Dante Controller as transmitters and receivers, and are available in Dante
Controller for routing with other Dante devices.

Dante Transmitters and Receivers

A Dante network is comprised of transmitters that output digital audio onto the Dante
network and receivers that receive digital audio input from the Dante network.

AXI Transmitters and Receivers

AXI mic/line inputs are Dante transmitters because the analog audio input is converted into
digital audio and transmitted onto the Dante network.
AXI analog outputs are Dante receivers because they receive digital audio from the Dante
network and output that signal as analog audio via the analog outputs.

Routing Device Channels

After the AXIis configured via the front panel controls or in DSP Configurator, the
channels must be routed to or from the other Dante devices on the audio network.
Channels transmitted to the network or received from the network are routed using the
DanteController Network View page and the Routing tab (see figure 33 on the next
page). The transmitters, listed horizontally along the top of the screen, and the receivers,
listed vertically down the left side, form a matrix whose intersections are the connection
points between the receivers and transmitters.
To make the receiver-to-transmitter subscription (connection), click once on an
intersection. Once a subscription has been made, the corresponding subscription icon
will appear.
NOTE: AXI 22 AT and AXI 44 AT support up to two transmit flows (unicast or
multicast) and two receive flows (unicast or multicast). Refer to the Dante Controller
User Guide for more information on flows.
To remove a subscription, click on the icon at the intersection.
One of the following icons appears at each subscription intersection, indicating the status of
both the transmitter and receiver channels and the subscription:
Icon Description
Indicates an active subscription.
Indicates a pending subscription.
Indicates a broken subscription.
Indicates the transmitting device has been removed from the network or is
switched off.
See the Dante Controller User Guide, available at the Audinate website, for additional
information.

Manual

View the manual for the Extron AXI 44 AT here, for free. This manual comes under the category audio / video converters and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron AXI 44 AT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron AXI 44 AT specifications

Below you will find the product specifications and the manual specifications of the Extron AXI 44 AT.

General
BrandExtron
ModelAXI 44 AT | 60-1628-01
Productaudio / video converter
LanguageEnglish
FiletypeUser manual (PDF)
Outputs
Audio (L/R) out0
Inputs
USB 1.1 ports quantity0
Digital audio coaxial in0
Digital audio optical in0
Technical details
Product colorBlack
CertificationCE, c-UL, UL, C-Tick, FCC A, ICES, VCCI A
Product colorBlack
CertificationCE, c-UL, UL, C-Tick, FCC A, ICES, VCCI A
Packaging data
Quantity1
Weight & dimensions
Height43 mm
Width110 mm
Depth153 mm
Weight300 g
Height43 mm
Width110 mm
Depth153 mm
Weight300 g
Power
Power consumption (typical)11.9 W
Power consumption (typical)11.9 W
Ports & interfaces
Audio (L/R) out0
Audio output-
Audio input-
Audio
Audio input channels4 channels
Audio output channels4 channels
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Heat dissipation25.1 BTU/h
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron AXI 44 AT below.

What is the weight of the Extron AXI 44 AT?

The Extron AXI 44 AT has a weight of 300 g.

What certifications does the Extron AXI 44 AT have?

The Extron AXI 44 AT has the following certifications: CE, c-UL, UL, C-Tick, FCC A, ICES, VCCI A.

What is the height of the Extron AXI 44 AT?

The Extron AXI 44 AT has a height of 43 mm.

What is the width of the Extron AXI 44 AT?

The Extron AXI 44 AT has a width of 110 mm.

What is the depth of the Extron AXI 44 AT?

The Extron AXI 44 AT has a depth of 153 mm.

Is the manual of the Extron AXI 44 AT available in English?

Yes, the manual of the Extron AXI 44 AT is available in English .

Is your question not listed? Ask your question here

No results