Extron AXI 44 AT manual

Extron AXI 44 AT
9.2 · 1
PDF manual
 · 45 pages
English
manualExtron AXI 44 AT
AXI 22 AT and AXI 44 AT • Installation and Operation 9
I
Input and Output Signal and Clip LEDs — The green signal LEDs light steadily
when signal is present and increase in intensity from -60dBFS (lowest intensity, signal
presence indication) to -1 dBFS (full brightness). The red clip LEDs light steadily at
-1dBFS to indicate clipping and stay lit for one second beyond receiving the clip
message.

Reset Modes

Pressing the rear panel reset button (see figure 3,
E
on page5) with a stylus or Extron
Tweeker will reset only the Dante module in the AXI, leaving the gain and phantom power
settings unaffected. There are two reset modes that can be activated via the rear panel reset
button.

Reset Mode 1

Press the rear panel reset button and quickly release it to cause a hardware reset of the
Dante module while preserving all of its settings such as IP configuration, routing, device
name, channel names, and sampling rate.

Reset Mode 2

To cause an absolute system reset of the Dante module back to factory default conditions,
press and hold the rear panel reset button for 10 seconds until the AT (PoE) port LEDs flash.
Following this reset, the Dante module will proceed to its normal boot sequence. This reset
will:
Set the IP configuration to default settings
Clear all audio channel routing
Set the Dante device name and channel names to default

Manual

View the manual for the Extron AXI 44 AT here, for free. This manual comes under the category audio / video converters and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron AXI 44 AT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron AXI 44 AT specifications

Below you will find the product specifications and the manual specifications of the Extron AXI 44 AT.

General
BrandExtron
ModelAXI 44 AT | 60-1628-01
Productaudio / video converter
LanguageEnglish
FiletypeUser manual (PDF)
Outputs
Audio (L/R) out0
Inputs
USB 1.1 ports quantity0
Digital audio coaxial in0
Digital audio optical in0
Technical details
Product colorBlack
CertificationCE, c-UL, UL, C-Tick, FCC A, ICES, VCCI A
Product colorBlack
CertificationCE, c-UL, UL, C-Tick, FCC A, ICES, VCCI A
Packaging data
Quantity1
Weight & dimensions
Height43 mm
Width110 mm
Depth153 mm
Weight300 g
Height43 mm
Width110 mm
Depth153 mm
Weight300 g
Power
Power consumption (typical)11.9 W
Power consumption (typical)11.9 W
Ports & interfaces
Audio (L/R) out0
Audio output-
Audio input-
Audio
Audio input channels4 channels
Audio output channels4 channels
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Heat dissipation25.1 BTU/h
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron AXI 44 AT below.

What is the weight of the Extron AXI 44 AT?

The Extron AXI 44 AT has a weight of 300 g.

What certifications does the Extron AXI 44 AT have?

The Extron AXI 44 AT has the following certifications: CE, c-UL, UL, C-Tick, FCC A, ICES, VCCI A.

What is the height of the Extron AXI 44 AT?

The Extron AXI 44 AT has a height of 43 mm.

What is the width of the Extron AXI 44 AT?

The Extron AXI 44 AT has a width of 110 mm.

What is the depth of the Extron AXI 44 AT?

The Extron AXI 44 AT has a depth of 153 mm.

Is the manual of the Extron AXI 44 AT available in English?

Yes, the manual of the Extron AXI 44 AT is available in English .

Is your question not listed? Ask your question here

No results