Ernitec SX-343IR manual

Ernitec SX-343IR
8 · 1
PDF manual
 · 19 pages
English
manualErnitec SX-343IR
11
User’s Manual Mercury SX4 series
© 2016 Ernitec. All rights reserved
www.ernitec.com
V 3.01.090117
Step 8: A prompt window requesting for default username and password will
appear. Enter the default username and password shown below to
login to the camera.
Login ID
Password
Admin
1234
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator’s password
be altered for the security concerns. Refer to the Full HD
Multi-Streams IP Camera Menu Tree in the supplied CD
for further details.
Installing Viewer Software Online
For the initial access to the IP camera, a client program, Viewer, will be
automatically installed to the PC when connecting to the camera.
If the web browser doesn’t allow Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
section Setup Internet Security) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser.
Right click on the Information Bar and select <Install ActiveX Control…> to
allow the installation.
The download procedure of Viewer software is specified as follows.
Step 1: In the Viewer installation window, click on <Next> to start
installation.
4.
Step 2: The status bar will show the installation progress. After the
installation is completed, click on <Finish> to exit the installation
process.
5.
Step 3: Click on <Finish> to close the Viewer installation page.

Manual

View the manual for the Ernitec SX-343IR here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Ernitec SX-343IR or do you need help? Ask your question here

Need help?

Do you have a question about the Ernitec and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ernitec SX-343IR specifications

Below you will find the product specifications and the manual specifications of the Ernitec SX-343IR.

General
BrandErnitec
ModelSX-343IR | 0070-04343IR
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Image sensor
Number of effective pixels (H x V)2048 x 1536 pixels
Sensor typeCMOS
Number of sensors1
Optical sensor size1/3 "
Progressive scanYes
Video
NTSC resolutions2048 x 1536 pixels
PAL resolutions2048 x 1536 pixels
Maximum resolution2048 x 1536 pixels
Total megapixels- MP
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 2560 x 1440
Video formats supportedH.264, M-JPEG
Supported video modes720p, 1080p
Analog signal format systemNTSC, PAL
3D NR (Noise Reduction)Yes
Frame rate60 fps
Full HDYes
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Video streamingYes
Privacy maskingYes
Performance
TypeIP security camera
Placement supported-
Wide Dynamic Range (WDR)Yes
Light exposure modesAuto, Manual
Infrared (IR) cut-off filterYes
Connectivity technologyWired
Network
Ethernet LANYes
Wi-Fi-
Bluetooth-
Ethernet interface typeFast Ethernet
Supported network protocolsIPv4/v6, TCP/IP, UDP, RTP, STPS, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, PPPoE, Upnp, IGMP, SNMP, QoS
Networking standardsIEEE 802.3af
Quality of Service (QoS) supportYes
Number of users20 user(s)
Streaming methodMulticast
Night vision
Infra-red wavelength850 nm
Night visionYes
Night vision distance30 m
LED typeIR
Number of illumination LEDs6
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Terminal block portYes
Design
Form factorDome
Product colorBlack, White
Mounting type-
Protection featuresVandal proof
International Protection (IP) codeIP66
IK codeIK10
Audio
Audio formats supportedG.711, G.726
Audio system2-way
Weight & dimensions
Height117.4 mm
Diameter133.8 mm
Weight745 g
Power
Power source typeAC, DC, PoE
AC input voltage24 V
Power consumption (typical)12.9 W
Camera
Field of view (FOV) angle102 °
Minimum illumination0.02 lx
White balanceATW, Auto, Manual
Camera shutter typeElectronic
Camera shutter speed1 - 1/10000 s
Management features
Web browserYes
Lens system
Number of lenses1
Zoom capabilityYes
FocusMotorized
Maximum aperture number2.1
Auto focusYes
Minimum aperture number1.4
Focal length range2.8 - 12 mm
Operational conditions
Operating temperature (T-T)-40 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Packaging content
Number of cameras1
Security
Password protectionYes
Password protection typeSupervisor, User
Video motion detectionYes
Active tampering alarmYes
Storage
Card reader integratedYes
Compatible memory cardsSDXC
Built-in HDD-
Maximum memory card size64 GB
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ernitec SX-343IR below.

What is the weight of the Ernitec SX-343IR?

The Ernitec SX-343IR has a weight of 745 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Ernitec SX-343IR?

The Ernitec SX-343IR has a height of 117.4 mm.

Is the manual of the Ernitec SX-343IR available in English?

Yes, the manual of the Ernitec SX-343IR is available in English .

Is your question not listed? Ask your question here

No results