Ernitec 0070-04344IR manual

Ernitec 0070-04344IR
7.9 · 1
PDF manual
 · 19 pages
English
manualErnitec 0070-04344IR
8
User’s Manual Mercury SX4 series
© 2016 Ernitec. All rights reserved
www.ernitec.com
V 3.01.090117

2. Camera Cabling

Before users connect cables, make sure that all cables and the power
adaptor are placed in dry and well-waterproofed environments, e.g.
waterproof boxes. The purpose is to prevent moisture accumulation inside
the camera and moisture penetration into cables, which might lead to device
breakdown. Please refer to the following sections for camera connection.

2.1 Connect Power

For power connection, please refer to section Connectors. Alternatively,
users can power the camera by PoE if a Power Sourcing Equipment (PSE)
switch is available. Please refer to the section below for Ethernet cable
connection.
NOTE: If PoE is used, make sure PSE is in use in the network.

2.2 Connect Ethernet Cable

To have best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet Cable to the RJ-45 connector of the
camera, and plug the other end of the cable to the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed
when connecting the IP camera directly to PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs
are unlit, please check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.

2.3 Connect Alarm I/O

The camera supports one alarm input and one relay output for alarm
application. Refer to section Connectors for pin definitions.

3. System Requirements

To perform the IP camera via web browser, please ensure the PC is in good
network connection, and meet system requirements as described below.
Items
System Requirement
Personal Computer
1. Intel
®
Pentium
®
M, 2.16 GHz or
Intel
®
Core
TM
2 Duo, 2.0 GHz
2. 2 GB RAM or more
Operating System
Windows VISTA / Windows XP / Windows 7

Manual

View the manual for the Ernitec 0070-04344IR here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Ernitec 0070-04344IR or do you need help? Ask your question here

Need help?

Do you have a question about the Ernitec and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ernitec 0070-04344IR specifications

Below you will find the product specifications and the manual specifications of the Ernitec 0070-04344IR.

General
BrandErnitec
Model0070-04344IR | 0070-04344IR
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Design
Form factorDome
Product colorBlack, White
International Protection (IP) codeIP66
IK codeIK10
Mounting type-
Protection featuresVandal proof
Image sensor
Sensor typeCMOS
Number of effective pixels (H x V)2688 x 1520 pixels
Number of sensors1
Optical sensor size1/3 "
Progressive scanYes
Camera
Camera shutter typeElectronic
Camera shutter speed1 - 1/10000 s
Minimum illumination0.02 lx
Field of view (FOV) angle102 °
White balanceATW, Auto, Manual
Lens system
Maximum aperture number2.1
FocusMotorized
Auto focusYes
Focal length range2.8 - 12 mm
Minimum aperture number1.4
Zoom capabilityYes
Number of lenses1
Performance
Infrared (IR) cut-off filterYes
Light exposure modesAuto, Manual
Wide Dynamic Range (WDR)Yes
TypeIP security camera
Connectivity technologyWired
Placement supported-
Video
Video formats supportedH.264, M-JPEG
Maximum resolution2560 x 1440 pixels
Full HDYes
Supported video modes720p, 1080p
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 2560 x 1440
NTSC resolutions2560 x 1440 pixels
PAL resolutions2560 x 1440 pixels
Analog signal format systemNTSC, PAL
Frame rate60 fps
Video streamingYes
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
3D NR (Noise Reduction)Yes
Privacy maskingYes
Total megapixels- MP
Network
Streaming methodMulticast
Ethernet LANYes
Wi-Fi-
Bluetooth-
Ethernet interface typeFast Ethernet
Quality of Service (QoS) supportYes
Supported network protocolsIPv4/v6, TCP/IP, UDP, RTP, STPS, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, PPPoE, Upnp, IGMP, SNMP, QoS
Number of users20 user(s)
Networking standardsIEEE 802.3af
Security
Video motion detectionYes
Active tampering alarmYes
Password protectionYes
Password protection typeSupervisor, User
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Terminal block portYes
Management features
Web browserYes
Storage
Built-in HDD-
Card reader integratedYes
Compatible memory cardsSDXC
Maximum memory card size64 GB
Audio
Audio system2-way
Audio formats supportedG.711, G.726
Power
Power source typeAC, DC, PoE
AC input voltage24 V
Power consumption (typical)12.9 W
Night vision
Night visionYes
Night vision distance30 m
LED typeIR
Number of illumination LEDs6
Infra-red wavelength850 nm
Operational conditions
Operating temperature (T-T)-40 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Weight & dimensions
Diameter133.8 mm
Height117.4 mm
Weight745 g
Packaging content
Number of cameras1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ernitec 0070-04344IR below.

What is the weight of the Ernitec 0070-04344IR?

The Ernitec 0070-04344IR has a weight of 745 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Ernitec 0070-04344IR?

The Ernitec 0070-04344IR has a height of 117.4 mm.

Is the manual of the Ernitec 0070-04344IR available in English?

Yes, the manual of the Ernitec 0070-04344IR is available in English .

Is your question not listed? Ask your question here

No results