Equip Cat.6 Keystone Jack manual

Equip Cat.6 Keystone Jack
(1)
  • Number of pages: 1
  • Filetype: PDF
2. Follow the color-coding to position T568A or T568B wiring.
T568A T568B
Pin 1 White/Green Pin 1 White/Orange
Pin 2 Green Pin 2 Orange
Pin 3 White/Orange Pin 3 White/Green
Pin 4 Blue Pin 4 Blue
Pin 5 White/Blue Pin 5 White/Blue
Pin 6 Orange Pin 6 Green
Pin 7 White/Brown Pin 7 White/Brown
Pin 8 Brown Pin 8 Brown
4. Follow the color sign to put the cap onto IDC.
6. Tie up the cable and finish.
Unshield
Shielded
connect the drain wire
to the shielded shell

www.equip-info.net

1. Strip approximately 40mm of the cable jacket.
3. Follow the cap color code to place the wires into
the cap slot. Make sure to keep the pairs twisted
as long as possible.
5. Lock the side caps with "CLICK" means
successful connection.
40mm
Drain wire

Cat.6 Keystone Jack tool less

Equip Cat.6 Keystone Jack

Need help?

Number of questions: 0

Do you have a question about the Equip Cat.6 Keystone Jack or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Equip Cat.6 Keystone Jack owners to properly answer your question.

View the manual for the Equip Cat.6 Keystone Jack here, for free. This manual comes under the category Cables for computers and peripherals and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Equip Cat.6 Keystone Jack or do you need help? Ask your question here

Equip Cat.6 Keystone Jack specifications

General
Brand Equip
Model Cat.6 Keystone Jack
Product Cables for computers and peripherals
EAN 4015867138984
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Equip Cat.6 Keystone Jack.

Is your question not listed? Ask your question here