Epson WorkForce WF-7015 manual

Epson WorkForce WF-7015
7.3 · 1
PDF manual
 · 2 pages
English
manualEpson WorkForce WF-7015

How to install a CISS onto an Epson WF7015

1. Place the CISS on the right side of the printer
(pic. 1) and straighten the pipe.

Check if the color order on the sticker of the printer

matches the order of color silicon plugs onto the cartridges.

In case of a mismatch the order should be changed!

pic. 1 pic. 2
2.Pulloutthesmallplugsandcarefullyinsertairl-
ters instead (pic. 2). Keep the small plugs - you will have to
insertthem backinstead ofair ltersif youneed totransport
you printer or CISS itself.
3. Plug in the printer to the electric network. Lift the
lid of the printer. After the carriage moves into the “cartridge
Set the carriage in a position which will allow you to hold it
with both hands (pic. 8) and carefully push the cartridges down
until they click in. Make sure that all the four cartridges are
properly clicked in.
6. Place the Clips left from the middle of the prin-

ter (pic.9). Place the second Clips. Fix the ink pipe into it

(pic. 10). Make sure that there is no twist in the pipe to en-

sure the proper operation of the printer.

7. Move the carriage into the extreme left position

(pic. 11), and then to the extreme right position (pic. 12).

pulling the pipe with the other one in the needed direction
(pic. 13, pic. 14).
9. The ink tanks should be placed 8 cm above the
level of the printer, not higher and not lower (pic. 16)
10. Plug in the printer to the electric network.
11. Switch the printer on . The printer will show you
about the need to change the cartridges (pic. 15). Perform the
chip resetting procedure described in the section “Resetting the
ink level”.
After the printer shows that it’s ready for operation
you should perform the type head condition test. On your com-
puter by choosing the Start - Printers and faxesand clicking the
right mouse button on your printer to select Printing preferences
pic. 3 pic. 4
pic. 5 pic. 6
change” position (pic. 3), unplug the printer from the electric
network by pulling the power cable out of the socket.
4. Use a screwdriver to remove the cover (pic. 4). In-
sert it in between the clip and the carriage. Bend the clip right-
wards (pic. 5) until you are able to remove the cover (pic. 6).
Take off the cover. The printer will work even if the clip is bro-
ken.
5. Insert the cartridge block into the carriage (pic. 7).
pic. 7 pic. 8
pic. 14pic. 13
pic. 9 pic. 10
pic. 11 pic. 12
pic. 17
pic. 18

Check that there is no twist along the pipe and that it doesn’t

interfere with the movement of the carriage. The pipe should

not be slack.

8. If the pipe is shorter than needed, pull it out in

the needed direction by holding the Clips with one hand and
– Maintenance – Nozzle check(pic. 17, pic 18).
12. In order to transport the printer replace the air
lters with the small plugs. Do not leave the printer without
cartridges or a CISS, otherwise the printhead will dry up. Any
movement of the printer from one place to another should be
performed with utmost care and compliance with the transpor-
tation rules, otherwise moving the tank may result in ink leak-
ing into the printer which will disable the device.
pic. 15
pic. 16

Manual

View the manual for the Epson WorkForce WF-7015 here, for free. This manual comes under the category Printers and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Epson WorkForce WF-7015 or do you need help? Ask your question here

Need help?

Do you have a question about the Epson and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Samsung Galaxy A7 owners to provide you with a good answer.

marcia • 26-3-2019 No comments

unable to copy drivers license

Answer this question

Number of questions: 1

Epson WorkForce WF-7015 specifications

Below you will find the product specifications and the manual specifications of the Epson WorkForce WF-7015.

General
Brand Epson
Model WorkForce WF-7015
Product Printer
EAN 4053162314320, 8715946483955
Language English
Filetype PDF
Other features
All-in-one functions Print
Colour all-in-one functions Print
Dimensions (WxDxH) 558 x 414 x 264 mm
Compatible operating systems Windows XP\nWindows XP (64-bit)\nWindows Vista\nWindows 7\nWindows Server 2008 R2\nWindows Server 2008\nWindows Server 2003\nMac OS 10.4.11
Wireless technology 802.11 b/g/n
Printing
Print technology Inkjet
Maximum resolution 5760 x 1440 DPI
Print speed (black, normal quality, A4/US Letter) 34 ppm
Print speed (colour, normal quality, A4/US Letter) 34 ppm
Duplex printing mode Auto
Printing Colour printing
Duplex printing
Features
Maximum duty cycle - pages per month
Number of print cartridges 4
Printing colours Black,Cyan,Magenta,Yellow
Digital sender
Country of origin Indonesia
Copying
Maximum copy resolution - DPI
Copying
Scanning
Optical scanning resolution - DPI
Scanning
Input & output capacity
Total input capacity 500 sheets
Paper input type Paper tray
Total output capacity - sheets
Paper handling
Maximum print size 216 x 297 mm
Paper tray media types Envelopes
ISO A-series sizes (A0...A9) A3,A4,A5,A6
ISO B-series sizes (B0...B9) B4,B5
Envelopes sizes 10,C4,C6,DL
Photo paper sizes 9x13,10x15,13x18,20x25 cm
Paper tray media weight 0 - 75 g/m²
Maximum ISO A-series paper size A4
Ports & interfaces
Standard interfaces Ethernet,USB 2.0
Direct printing -
USB 2.0 ports quantity 1
USB port
Network
Ethernet LAN
Wi-Fi
Wi-Fi standards 802.11b,802.11g,Wi-Fi 4 (802.11n)
Security algorithms 128-bit WEP,64-bit WEP,WPA-AES,WPA-PSK,WPA-TKIP,WPA2-PSK
Performance
Internal memory 0 MB
Card reader integrated
Mac compatibility
Power
Power consumption (average operating) 20 W
Power consumption (standby) 3.7 W
AC input voltage 220 - 240 V
Weight & dimensions
Weight 12300 g
null
System requirements
Windows operating systems supported
Mac operating systems supported
Packaging content
Bundled software Epson Easy Photo Print\nEpson NetEasy setup
Drivers included
Sustainability
Sustainability certificates ENERGY STAR
Fax
Faxing
Design
Market positioning Business
Logistics data
Products per pallet 10 pc(s)
Pallet gross width 800 mm
Pallet gross length 1200 mm
Pallet gross height 2030 mm
Products per pallet layer 2 pc(s)
Products per pallet layer (UK) 2 pc(s)
Products per pallet (UK) 10 pc(s)
Pallet length (UK) 1200 mm
Pallet width (UK) 1000 mm
Pallet height (UK) 2030 mm
Packaging data
Package weight 15840 g
Package depth 707 mm
Package height 395 mm
Package width 507 mm
Quantity per pack 1 pc(s)
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Epson WorkForce WF-7015 below.

Is your question not listed? Ask your question here

No results