Epson V11H877022 manual

Epson V11H877022
8.5 · 1
PDF manual
 · 312 pages
English
manualEpson V11H877022
271
Clean the projection window.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
Position the projector close enough to the screen, and directly in front of it.
Verify that the throw distance from the projector to your projection surface meets the specifications in
your projector's Installation Guide.
Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
Adjust the Sharpness setting to improve image quality.
If you are projecting from a computer using a VGA cable, press the Auto button on the remote control
to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a
uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
If you are projecting from a computer, adjust the computer's resolution to match the projector's native
resolution, if possible.
Reset the keystone, Quick Corner, and Arc Correction settings to their factory defaults and refocus
the image.
Note: If the projector is mounted on the wall, always use the adjustment dials on the mount to center
the image.
Make sure the screen is flat.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Related tasks
Focusing the Image

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
Press the Color Mode button on the remote control to try different color modes for the image and
environment.
Check your video source settings.

Manual

View the manual for the Epson V11H877022 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Epson V11H877022 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Epson and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Epson V11H877022 specifications

Below you will find the product specifications and the manual specifications of the Epson V11H877022.

General
BrandEpson
ModelV11H877022 | V11H877022
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness4000 ANSI lumens
Projection technologyLCD
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)2500000:1
Native aspect ratio-
Supported aspect ratios4:3, 16:10, 16:9
Screen size compatibility70.4 - 100 "
Projection distance- m
Number of colors1.073 billion colors
Keystone correction, horizontal-3 - 3 °
Keystone correction, vertical-3 - 3 °
Matrix type3-panel (p-Si TFT active)
White light output4000 ANSI lumens
Color light output4000 ANSI lumens
Light source
Service life of light source20000 h
Lamp power448 W
Lamp type-
Light source typeLamp
Lens system
FocusManual
Fixed focal length4.2 mm
Throw ratio0.22 - 0.37
Focal length range- mm
Zoom ratio1.35:1
Video
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Full HDYes
3D-
Ports & interfaces
VGA (D-Sub) ports quantity1
HDMI ports quantity2
Composite video in1
Component video (YPbPr/YCbCr) in1
USB 2.0 ports quantity2
USB 2.0 Type-B ports quantity1
Audio (L/R) in2
Audio (L/R) out1
Mobile High-Definition Link (MHL)Yes
Serial interface typeRS-232C
S-Video inputs quantity-
Network
Smart TV-
Ethernet LANYes
Ethernet LAN (RJ-45) ports1
Wi-Fi-
Storage
Card reader integrated-
Weight & dimensions
Weight24700 g
Width495.3 mm
Depth439.4 mm
Height172.7 mm
Operational conditions
Operating temperature (T-T)0 - 45 °C
Power
Power sourceAC
Power consumption (typical)448 W
Power consumption (standby)2 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Display
Built-in display-
Design
Product typeWall-mounted projector
Product colorWhite
Market positioning-
Cable lock slotYes
Cable lock slot typeKensington
PlacementCeiling, Wall
Multimedia
Built-in speaker(s)Yes
RMS rated power16 W
Features
Noise level38 dB
Noise level (economic mode)27 dB
Compatible operating systemsMicrosoft Windows Vista SP2 (All editions except for Starter), Windows 8/8.1, Windows 10, Windows 7 SP1 (All editions except for Starter)\nMac OS 10.7/10.8/10.9/10.10/10.11/macOS 10.12.x, UBUNTU 15.10, 16.04 LTX, 16.10, 17.04
Packaging content
ManualYes
Cables includedAC
Remote control typeIR
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Epson V11H877022 below.

What is the weight of the Epson V11H877022?

The Epson V11H877022 has a weight of 24700 g.

What is the height of the Epson V11H877022?

The Epson V11H877022 has a height of 172.7 mm.

What is the width of the Epson V11H877022?

The Epson V11H877022 has a width of 495.3 mm.

What is the depth of the Epson V11H877022?

The Epson V11H877022 has a depth of 439.4 mm.

Is the manual of the Epson V11H877022 available in English?

Yes, the manual of the Epson V11H877022 is available in English .

Is your question not listed? Ask your question here

No results