Eminent EM6225 manual

Eminent EM6225
8.9 · 2
PDF manual
 · 27 pages
English
manualEminent EM6225
EM6225
e-CamView Pan/Tilt HD IP camera

Manual

View the manual for the Eminent EM6225 here, for free. This manual comes under the category security cameras and has been rated by 2 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Eminent EM6225 or do you need help? Ask your question here

Need help?

Do you have a question about the Eminent and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Eminent EM6225 specifications

Below you will find the product specifications and the manual specifications of the Eminent EM6225.

General
BrandEminent
ModelEM6225 | EM6225
Productsecurity camera
EAN8716065321081
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeIP security camera
PTZ controlYes
Placement supported-
Connectivity technologyWired & Wireless
Design
Form factor-
Product colorWhite
Video
Maximum resolution1280 x 720 pixels
Video formats supportedH.264
Supported graphics resolutions320 x 180,640 x 360,1280 x 720 (HD 720)
Supported video modes-
Frame rate30 fps
Total megapixels1 MP
Camera
Minimum illumination- lx
Angle of rotation355 °
Image sensor
Sensor typeCMOS
Lens system
Zoom capability-
Optical zoom- x
Fixed focal length3.6 mm
Storage
Card reader integratedYes
Compatible memory cardsMicroSD (TransFlash)
Built-in HDDNo
Maximum memory card size32 GB
Night vision
Night visionYes
Night vision distance8 m
Number of illumination LEDs8
Network
Ethernet LANYes
Cabling technology10/100Base-T(X)
Wi-FiYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocolsTCP/IP, HTTP, DHCP, FTP, UDP, SMTP, DNS, NTP, UPNP
Ports & interfaces
Microphone inYes
Ethernet LAN (RJ-45) ports1
Audio
Built-in microphoneYes
Built-in speaker(s)Yes
Power
Power over Ethernet (PoE)-
Technical details
Sustainability certificatesRoHS
Power source5V 2A
Operational conditions
Operating temperature (T-T)-5 - 50 °C
Operating relative humidity (H-H)10 - 80 %
Packaging content
ManualYes
AC adapter includedYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Eminent EM6225 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Does the Eminent EM6225 support PTZ control?

Yes, the Eminent EM6225 supports PTZ control. This means that users can remotely Pan, Tilt, and Zoom the camera to get a wider view and have better control over their surveillance.

What is the maximum resolution of the Eminent EM6225?

The maximum resolution of the Eminent EM6225 is 1280 x 720 pixels. This ensures high-quality and clear video footage for the user.

What video formats are supported by the Eminent EM6225?

The Eminent EM6225 supports the H.264 video format, which is widely recognized for its efficient compression and high-quality video playback. This means that users can enjoy both smooth streaming and reduced storage requirements.

What is the angle of rotation of the Eminent EM6225?

The Eminent EM6225 has a wide angle of rotation of 355°. This allows users to have extensive coverage and monitor a large area without the need for multiple cameras.

Does the Eminent EM6225 have night vision capability?

Yes, the Eminent EM6225 has night vision functionality. With a night vision distance of 8 meters, it ensures continuous surveillance even in low light conditions, providing users with peace of mind and enhanced security.

How do I troubleshoot if the Eminent EM6225 security camera is not connecting to the network?

To troubleshoot if the Eminent EM6225 security camera is not connecting to the network, follow these steps: 1. Check the physical connections: Ensure that the camera is properly connected to the power source and your modem/router or switch using the provided network cable. 2. Reset the camera: Locate the reset button on the bottom of the EM6225 camera. Use a paperclip or similar tool to press and hold the reset button for more than 15 seconds. This will restore the camera to its factory settings. 3. Connect via a network cable: It is recommended to initially connect the camera to the network using a network cable. Once everything is working correctly, you can switch to using a wireless network. 4. Verify network settings: Make sure that your modem/router or switch is configured correctly and that the camera is assigned a valid IP address. 5. Check network signal strength: If you are using a wireless connection, ensure that the camera is within range of your Wi-Fi network and that the signal strength is sufficient. By following these steps, you should be able to troubleshoot and resolve any issues with the Eminent EM6225 security camera not connecting to the network.

What should I do if I cannot view the images from the Eminent EM6225 security camera on my smartphone or PC?

To troubleshoot if you cannot view the images from the Eminent EM6225 security camera on your smartphone or PC, follow these steps: 1. Check the camera's network connection: Ensure that the camera is properly connected to your home network. Verify that the network cable is securely connected or that the camera is connected to the correct Wi-Fi network. 2. Verify the camera's IP address: Check the camera's IP address settings to ensure it is assigned a valid IP address on your network. You can find the IP address in the camera's settings or by using network scanning tools. 3. Check the camera's compatibility with your smartphone or PC: Ensure that your smartphone or PC meets the minimum requirements to access and view the camera's images. Check the camera's manual or product specifications for compatibility information. 4. Install the necessary software or app: Make sure you have installed the appropriate software or app on your smartphone or PC to access the camera's images. Follow the instructions provided in the manual or on the manufacturer's website to download and install the required software or app. 5. Configure the software or app settings: Open the software or app on your smartphone or PC and configure the settings to connect to the camera. Enter the camera's IP address and login credentials, if required. Make sure the software or app is set to display the camera's live feed or recorded images. By following these steps, you should be able to troubleshoot and resolve the issue of not being able to view the images from the Eminent EM6225 security camera on your smartphone or PC.

How can I troubleshoot if the e-CamView app is not working properly with the Eminent EM6225 security camera?

To troubleshoot if the e-CamView app is not working properly with the Eminent EM6225 security camera, follow these steps: 1. Download and install the e-CamView app: Go to the "Play Store" or "App Store" on your smartphone or tablet and search for the e-CamView app. Download and install the app on your device. 2. Open the e-CamView app: Once the app is installed, open it on your device. 3. Add the camera to the app: Tap on the "+" button within the app to add the camera. A new screen will appear to enter the camera details. 4. Choose the camera connection method: You can choose to add the camera manually, scan the QR code on the camera's sticker, or search for the camera via LAN. 5. Enter the camera details: Fill in the required camera information, such as the IP address and password. The password is the 4-digit code found on the sticker at the bottom of the camera. 6. Complete the camera setup: Tap on "Done" to add the camera to the app. If the e-CamView app is still not working properly, you may need to check your network connection, ensure that the camera firmware is up to date, or contact Eminent customer support for further assistance.

What should I do if the e-CamView PC software is not detecting the Eminent EM6225 security camera?

To troubleshoot if the e-CamView PC software is not detecting the Eminent EM6225 security camera, follow these steps: 1. Install the e-CamView PC software: Insert the CD-ROM provided with the camera into your PC's CD-ROM drive. If the auto-run feature is enabled, the installation wizard will start automatically. Follow the wizard's instructions to install the e-CamView software. 2. Open the e-CamView software: Once the software is installed, open it on your PC. 3. Connect the camera to the PC: Ensure that the EM6225 camera and your PC are connected to the same network. If they are not, you can manually add the camera by right-clicking on "Camera List" and selecting "Add." Enter the camera's details, such as the camera name, username (default is "admin"), password (default is blank), and UID (found on the sticker at the bottom of the camera). 4. Search for the camera: Click on "Open Search Function" and then click on "Search." The camera's ID should appear in the list. Double-click on the camera's ID to select it. 5. Configure camera settings: A new screen will open where you can give the camera a different name if desired. Enter the password from the sticker at the bottom of the camera and click "OK." If the e-CamView PC software still does not detect the EM6225 camera, ensure that your PC and camera are connected to the same network and try restarting both devices. If the issue persists, you may need to contact Eminent customer support for further assistance.

How do I troubleshoot if the Eminent EM6225 security camera is not recording properly?

To troubleshoot if the Eminent EM6225 security camera is not recording properly, follow these steps: 1. Check the camera's storage: Ensure that the camera has a compatible storage device, such as an SD card, inserted and properly formatted. Check the camera's manual for the supported storage options and formatting instructions. 2. Verify the recording settings: Access the camera's settings through the e-CamView app or PC software. Make sure that the recording settings are configured correctly, including the recording mode (continuous, scheduled, or motion detection), resolution, and storage location. 3. Test the camera's motion detection: If you have enabled motion detection recording, check if the camera is detecting motion properly. Adjust the sensitivity settings if necessary. Ensure that there are no obstructions or interference affecting the camera's motion detection capabilities. 4. Update the camera's firmware: Check if there are any available firmware updates for the EM6225 camera. Visit the manufacturer's website and follow the instructions to download and install the latest firmware version. Firmware updates can sometimes resolve recording issues. 5. Power cycle the camera: Turn off the camera, disconnect the power source, wait for a few seconds, and then reconnect the power. This can help reset the camera and resolve any temporary issues. If the EM6225 camera still does not record properly after following these steps, you may need to contact Eminent customer support for further assistance.

How can I access the web page of the Eminent EM6225 security camera?

To access the web page of the Eminent EM6225 security camera, follow these steps: 1. Make sure the camera is connected to the network using an Ethernet cable. 2. Find the IP address of the camera. This information can usually be found in the camera's settings or documentation. 3. Open a web browser on your computer. 4. In the address bar of the web browser, enter the IP address of the camera. It should look something like "http://192.168.100.101:81" (replace the IP address with the actual IP address of your camera). 5. Press Enter to load the web page. 6. On the login page, enter the username "admin" and leave the password field blank. 7. Click on the Login or Submit button to log in to the web page of the camera. Once you have successfully logged in, you will be able to access and adjust the camera settings through the web page.

Why am I unable to access the web page of the Eminent EM6225 security camera?

There could be several reasons why you are unable to access the web page of the Eminent EM6225 security camera. Here are some possible solutions: 1. Check the network connection: Ensure that the camera is properly connected to the network using an Ethernet cable. 2. Verify the IP address: Make sure you have the correct IP address of the camera. You can find this information in the camera's settings or documentation. 3. Check the port number: The web page of the camera is typically accessed through a specific port number. Ensure that you are entering the correct port number in the web browser's address bar, following the IP address. For example, it may look like "http://192.168.100.101:81" (replace the IP address and port number with the actual values). 4. Verify the login credentials: Double-check the username and password used to log in to the web page. The default username is usually "admin," and the password field may be left blank. If you have followed these steps and are still unable to access the web page, it may be helpful to consult the manual or contact customer support for further assistance.

How do I configure the FTP settings for the Eminent EM6225 security camera?

To configure the FTP settings for the Eminent EM6225 security camera, follow these steps: 1. Access the web page of the camera by entering its IP address in a web browser. 2. Navigate to the FTP settings section. This can usually be found under the "Settings" or "Configuration" menu. 3. Enter the FTP server address. For example, it may look like "ftp.server.com". 4. If you want to save the images in a specific folder on the FTP server, use the "Path" option in the web user interface (WebUI) instead of the app. Enter the name of the folder in the "Path" field. 5. Click "OK" to save the settings. 6. Test the FTP settings by clicking on the "Test" button. This will verify if the camera can successfully connect to the FTP server. 7. Once the settings are saved and tested, the camera will be able to store images taken during alarm events on the configured FTP server. Please note that these steps are based on the Eminent EM6225 security camera manual and may vary slightly depending on the specific firmware version or user interface of the camera.

Why is the FTP connection not working for the Eminent EM6225 security camera?

There could be several reasons why the FTP connection is not working for the Eminent EM6225 security camera. Here are some possible solutions: 1. Verify the FTP server address: Double-check that the FTP server address is entered correctly in the camera's settings. The address should be in the format "ftp.server.com". 2. Check the network connection: Ensure that the camera is properly connected to the network and has internet access. Verify that other devices on the same network can connect to the FTP server. 3. Confirm the FTP server settings: Make sure that the FTP server is configured to accept connections from the camera. Check the server settings for any restrictions or firewall rules that may be blocking the connection. 4. Test the FTP connection: Use the camera's web user interface (WebUI) to test the FTP connection. Look for a "Test" or "Check Connection" button in the FTP settings section. This will verify if the camera can successfully connect to the FTP server. If the FTP connection still does not work after following these steps, it may be helpful to consult the manual or contact customer support for further assistance.

What maintenance tasks should I perform for the Eminent EM6225 security camera?

To perform maintenance tasks for the Eminent EM6225 security camera, follow these steps: 1. Mail settings: Configure the email settings to receive email notifications in case of an alarm. This can be done through the camera's web user interface (WebUI). 2. SD-Card settings: Set up the recording settings for the SD card. You can specify whether to overwrite older recordings when the card is full, set the recording length, and define specific start and stop times for recording. Additionally, you can view the total and available capacity of the SD card and format it if needed. 3. System maintenance: This option allows you to perform various maintenance tasks. You can restart the camera, restore it to factory settings, create a backup of the configuration, restore a backup, or update the firmware. These options can be accessed through the camera's WebUI. 4. Restoring to factory settings: If you need to reset the camera to its original factory settings, press and hold the "reset" button located at the bottom of the EM6225 camera for 15 seconds. After the reset, the camera will restart, and the default login username will be "admin" with no password. The password to view the camera will be set to "ipcam" after the reset. Please note that these steps are based on the Eminent EM6225 security camera manual and may vary slightly depending on the specific firmware version or user interface of the camera.

How do I restore the Eminent EM6225 security camera to factory settings?

To restore the Eminent EM6225 security camera to factory settings, follow these steps: 1. Make sure the camera is powered on. 2. Locate the "reset" button on the bottom of the EM6225 camera. 3. Using a small pin or paperclip, press and hold the "reset" button for 15 seconds. 4. Release the button after 15 seconds. 5. The camera will now be restored to its factory settings and will restart. After the reset, the default login username for the camera will be "admin" without a password. The password to view the camera will be set to "ipcam" after the reset. Please note that these steps are based on the Eminent EM6225 security camera manual and may vary slightly depending on the specific firmware version or user interface of the camera.

Why is the Eminent EM6225 security camera not responding after restoring to factory settings?

If the Eminent EM6225 security camera is not responding after restoring it to factory settings, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the camera is properly connected to a power source and that the power adapter is functioning correctly. Try using a different power outlet or power adapter if available. 2. Verify the network connection: Make sure the camera is connected to the network using an Ethernet cable or Wi-Fi. Check the network settings on the camera to ensure it is connected to the correct network. 3. Restart the camera: Try restarting the camera by disconnecting the power supply, waiting for a few seconds, and then reconnecting it. This can help refresh the camera's system and establish a new connection. 4. Reset the camera: If the camera is still unresponsive, you can perform a hard reset by pressing and holding the reset button on the camera for about 15 seconds. This will restore the camera to its default settings. If the camera continues to be unresponsive after following these steps, it may be necessary to contact customer support for further assistance or consider seeking professional help.

How do I upgrade the firmware of the Eminent EM6225 security camera?

To upgrade the firmware of the Eminent EM6225 security camera, follow these steps: 1. Download the latest firmware: Visit the Eminent website or the support page for the EM6225 camera to find and download the latest firmware version. 2. Access the camera's web user interface (WebUI): Open a web browser on your computer and enter the IP address of the camera to access the WebUI. 3. Navigate to the firmware upgrade section: Look for the "Firmware Upgrade" or similar option in the camera's settings menu. This is where you can upload and install the new firmware. 4. Select the firmware file: Click on the "Browse" or "Choose File" button in the firmware upgrade section and locate the downloaded firmware file on your computer. 5. Start the firmware upgrade: Once you have selected the firmware file, click on the "Upgrade" or "Update" button to start the firmware upgrade process. A progress bar will indicate the status of the upgrade. 6. Do not interrupt the process: It is important not to turn off or disconnect the camera during the firmware upgrade process. Wait for the upgrade to complete. 7. Automatic restart: After the firmware upgrade is successful, the EM6225 camera will automatically restart. Please note that these steps are based on the Eminent EM6225 security camera manual and may vary slightly depending on the specific firmware version or user interface of the camera.

What should I do if the firmware upgrade process for the Eminent EM6225 security camera fails?

If the firmware upgrade process for the Eminent EM6225 security camera fails, you can try the following steps to troubleshoot the issue: 1. Check the firmware file: Ensure that the firmware file you downloaded is compatible with the EM6225 camera model. Verify that you have downloaded the correct firmware version from the official Eminent website or support page. 2. Retry the firmware upgrade: Attempt the firmware upgrade process again. Make sure to follow the proper steps outlined in the manual or the previous answer. Ensure that the camera is connected to a stable power source and the network connection is stable. 3. Use a different firmware file: If the firmware upgrade continues to fail, try downloading a different firmware file from the Eminent website. It is possible that the initial firmware file was corrupted or incompatible. 4. Contact customer support: If the firmware upgrade still fails after trying the above steps, it is recommended to contact Eminent customer support for further assistance. They can provide guidance and help resolve the issue. Please note that these steps are based on general troubleshooting practices and may vary depending on the specific circumstances and firmware version of the EM6225 camera.

How do I install and connect the Eminent EM6225 security camera to my Windows PC or notebook?

To install and connect the Eminent EM6225 security camera to your Windows PC or notebook, follow these steps: 1. Insert the CD-ROM that came with the camera into the CD-ROM drive of your PC or notebook. 2. If the auto-run feature is enabled, the installation wizard will start automatically. 3. Follow the installation wizard to install the "e-CamView" application. 4. Once the application is installed, open "e-CamView" (if you receive a firewall notification, click "Always Allow"). 5. If the EM6225 camera and your PC are connected to the same network, you can detect the camera by clicking on "Camera List". 6. Click on "Open Search Function". 7. Click on "Search". 8. The camera's ID (found on the bottom of the camera) will appear in the list. Double-click on it to select it. 9. A new screen will open where you can give the camera a name (e.g., "Front Door"). Enter the password from the sticker on the bottom of the camera in the "Password" field and click "OK". 10. If the EM6225 camera and your PC are not connected to the same network, you can manually add the camera. Right-click on "Camera List" and choose "Add". Enter the missing information for the camera (Camera name, User name, Password, and UID) and click "OK". These steps will help you install and connect the Eminent EM6225 security camera to your Windows PC or notebook.

Why am I unable to view the images from the Eminent EM6225 security camera on my Android smartphone or tablet?

If you are unable to view the images from the Eminent EM6225 security camera on your Android smartphone or tablet, follow these steps: 1. Download and install the "e-CamView" app from the "Play Store" on your Android device. 2. Open the "e-CamView" app. 3. Tap on the "+" icon to add the camera to the app. 4. A new screen will appear where you can enter the camera details. 5. Choose the method to add the camera: Manual, Scan QR code, or Search via LAN. 6. If you have a QR code on the sticker at the bottom of the camera, you can scan it. Otherwise, you can search for the camera in the network or manually enter the camera details. 7. Enter the 4-digit password found on the sticker at the bottom of the camera. 8. Tap on "Done" to add the camera. 9. If you want to remove a camera from the app, go to the camera list, swipe the camera from right to left, and tap on the "Remove" button. By following these steps, you should be able to view the images from the Eminent EM6225 security camera on your Android smartphone or tablet using the "e-CamView" app.

How can I access the web interface of the Eminent EM6225 security camera?

To access the web interface of the Eminent EM6225 security camera, follow these steps: 1. Connect the camera to your network using an Ethernet cable. 2. Find the IP address of the camera. This can be done by checking the manual or using a network scanning tool. 3. Open a web browser on your computer. 4. Enter the IP address of the camera in the address bar of the web browser, followed by a colon and the port number (e.g., http://192.168.100.101:81). 5. Press Enter to load the web interface. 6. On the login page, enter the username "admin" and leave the password field blank. 7. Click on the "Login" button to access the web interface. 8. Once logged in, you can adjust camera settings and configure various options. Please note that the steps may vary slightly depending on the browser you are using, but the general process remains the same.

Why is the e-CamView software not working properly on my PC?

If the e-CamView software is not working properly on your PC, you can try the following steps: 1. Check if your PC meets the minimum system requirements for the e-CamView software. Ensure that your operating system is compatible and that you have enough available storage space. 2. Make sure that you have downloaded and installed the latest version of the e-CamView software from the official Eminent website. 3. Restart your PC and try launching the e-CamView software again. 4. If the software still does not work properly, try uninstalling and reinstalling it. Make sure to follow the installation instructions carefully. 5. Disable any antivirus or firewall software temporarily to see if they are causing any conflicts with the e-CamView software. 6. Check if there are any available updates for your PC's operating system and install them. 7. If the issue persists, contact Eminent customer support for further assistance, providing them with detailed information about the problem you are experiencing. By following these steps, you may be able to resolve any issues with the e-CamView software on your PC.

Why am I experiencing issues with the e-CamView app on my iPhone/iPad/Android device when trying to view the camera feed?

If you are experiencing issues with the e-CamView app on your iPhone/iPad/Android device when trying to view the camera feed, you can try the following troubleshooting steps: 1. Ensure that you have downloaded and installed the latest version of the e-CamView app from the "Play Store" (for Android devices) or the "App Store" (for iPhone/iPad). 2. Check if your device meets the minimum system requirements for the e-CamView app. Make sure that your operating system is up to date. 3. Verify that your device is connected to the same network as the Eminent EM6225 security camera. 4. Restart your device and try launching the e-CamView app again. 5. If the issue persists, uninstall the e-CamView app and reinstall it. 6. Double-check the camera settings in the app to ensure that the correct camera is selected and configured properly. 7. If you are using a firewall or antivirus software on your device, temporarily disable them to see if they are causing any conflicts with the app. 8. If none of the above steps resolve the issue, contact Eminent customer support for further assistance. By following these troubleshooting steps, you may be able to resolve the issues with the e-CamView app on your iPhone/iPad/Android device.

Is the manual of the Eminent EM6225 available in English?

Yes, the manual of the Eminent EM6225 is available in English .

Is your question not listed? Ask your question here

No results