Elite Screens M100NWV1 manual

Elite Screens M100NWV1
(1)
  • Number of pages: 3
  • Filetype: PDF
060817-DR www.elitescreens.com 1
Manual Pull-Down Projection Screen

Elite Manual Series

USER’S GUIDE

Pre-installation

1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.

INSTALLATION

Flush Wall Mounting

1. Measure the distance between the keyholes located on the back of the end cap
2. Mark the location of where the screen is to be installed for the pre-drilled hole.
3. After marking the area and drilling the hole, insert the proper screw into the drilled hole and leave
about 1/8” of an inch from the wall to mount the screen.
4. Mount your screen from the keyhole located on back of screen’s left and right end cap.
Back of end cap
Front view
Side view
Elite Screens M100NWV1

Need help?

Number of questions: 0

Do you have a question about the Elite Screens M100NWV1 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Elite Screens M100NWV1 owners to properly answer your question.

View the manual for the Elite Screens M100NWV1 here, for free. This manual comes under the category Projection screens and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Elite Screens M100NWV1 or do you need help? Ask your question here

Elite Screens M100NWV1 specifications

General
Brand Elite Screens
Model M100NWV1
Product Projection screen
Language English
Filetype PDF
Performance
Native aspect ratio 4:3
Viewable screen width (W) 2032 mm
Viewable screen height (H) 1524 mm
Diagonal 100 "
Screen gain 1.1
Format Video
Design
Product colour White
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Elite Screens M100NWV1.

Is your question not listed? Ask your question here