Elinchrom ELC 500 manual

Elinchrom ELC 500
  • Number of pages: 2
  • Filetype: PDF
Error numberDesription Solution
1 Capacitor overvoltage
Switch the unit off, wait
2 minutes and switch the
unit on again. If the error
shows up again the unit
requires a check-up at
an authorized Elinchrom
Service Centre.
4 Charge timeout
Voltage unstable
(Charge hold error)
18 Discharge circuit error
32 Head board type unknown
33 14 VDC error

125 / 500


Quick Start Guide

Elinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND
QSG ELC 125 / 500 - 08.2019
Av. de Longemalle 11, P. O. Box -458, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81 E-mail: elinchrom@elinchrom.ch
USB socket for
rmware update
Power supply
Sync socket
Elinchrom ELC 500

Need help?

Number of questions: 0

Do you have a question about the Elinchrom ELC 500 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Elinchrom ELC 500 owners to properly answer your question.

View the manual for the Elinchrom ELC 500 here, for free. This manual comes under the category Lights and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Elinchrom ELC 500 or do you need help? Ask your question here

Elinchrom ELC 500 specifications

Brand Elinchrom
Model ELC 500
Product Light
Language English
Filetype PDF
Total power 7 W
Number of bulbs 1 bulb(s)
Bulb type LED
Fitting/cap type -
Light colour White
Bulb lifetime - h
Bulb power - W
Product colour Black
Built-in display
On/off switch
Energy saving
Power source type AC
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Elinchrom ELC 500.

Is your question not listed? Ask your question here