Lighting or a car wireless telephone operating
nearby may cause the unit to malfunction.
Disconnect the unit with power and then re-connect
the unit with power again. Push ON/OFF button on
the remote control to restart operation.
;)DQIXQFWLRQ
The indoor unit may keep running after you switch
off the unit by pressing ON/OFF button.
Please check whether the X-Fan function is
switched off.
The following events may occur during normal
operation:
3URWHFWLRQRIWKHDLUFRQGLWLRQHU
&RPSUHVVRUSURWHFWLRQ
The compressor can’t restart for 3 minutes
after it stops
$QWLIUHH]LQJ
If the unit is operating in COOL mode and
in low ambient temperature, frost may be
formed on the heat exchanger. When indoor
heat exchanger temperature decreases
below 0°C, the compressor will stop
operation to protect the unit.
'HIURVWLQJ
Frost may form on the outdoor unit in heating
operation when the outdoor temperature
is low but humidity is high, resulting in low
KHDWLQJHI¿FLHQF\
During this condition the air conditioner will
stop heating operation and start defrosting
automatically. The time to defrost may vary
from 3 to 12 minutes.
During defrosting, the fan motors of indoor
unit and outdoor unit will stop, the indoor
LQGLFDWRUÀDVKHV³+´DQGWKHRXWGRRUXQLW
may emit vapor. This is not malfunction. After
GHIURVWLQJLV¿QLVKHGWKHKHDWLQJRSHUDWLRQ
will recover automatically.
$QWLFROGDLU
In HEAT mode, the indoor fan will not operate
in order to prevent cold air being blown into
the room (within 5 minutes), if the indoor
heat exchanger does not reach a minimum
temperature under the following states:
(1) Heating operation just start.
$IWHUDXWRGHIURVWLQJLVMXVW¿QLVKHG
(3) Heating at low temperature.
*HQWOHEUHH]H
The indoor unit may blow gentle breeze and the
louver rotate to a certain position in the following
situation:
(1) In HEAT mode, the unit is turned on, the
compressor does not reach the starting
condition.
(2) In HEAT mode, the temperature reaches the
set value and the compressor stops running
for about 1 minute.
$ZKLWHPLVWFRPLQJRXWIURPWKHLQGRRUXQLW
A white mist may generate due to a large
temperature difference between air inlet
and air outlet in COOL mode in an indoor
Manual
View the manual for the Electrolux EXI09HD1WI here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Electrolux EXI09HD1WI or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Electrolux EXI09HD1WI below.
What does BTU stand for?
BTU stands for British Thermal Unit and is a unit used to indicate cooling power.
What does R-410A stand for?
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
How often should I clean the filters of my Electrolux air conditioner?
The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Electrolux air conditioner at least four times a year.
Is the manual of the Electrolux EXI09HD1WI available in English?
Yes, the manual of the Electrolux EXI09HD1WI is available in English .
Need help?
Do you have a question about the Electrolux and is the answer not in the manual?
Question and answer
Number of questions: 0