View the manual for the Electrolux ESF5555LOX here, for free. This manual comes under the category dishwashers and has been rated by 3 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Electrolux ESF5555LOX or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Electrolux ESF5555LOX.
| Brand | Electrolux |
| Model | ESF5555LOX | ESF5555LOX |
| Product | dishwasher |
| EAN | 7332543477197 |
| Language | English |
| Filetype | Installation Guide (PDF), Datasheet (PDF), Energy label (PDF) |
| Appliance placement | Freestanding |
| Product size | Full size (60 cm) |
| Door color | Stainless steel |
| Control panel color | Stainless steel |
| Control type | Buttons, Touch |
| Built-in display | - |
| Cord length | 1.5 m |
| Inlet hose length | 1.5 m |
| Outlet hose length | 1.5 m |
| Upper basket adjustable height | Yes |
| Adjustable feet | Yes |
| Feet adjustment | - mm |
| Remaining time indication | Yes |
| Inverter technology | Yes |
| Number of place settings | 13 place settings |
| Noise level | 42 dB |
| Number of washing programs | 6 |
| Number of temperature settings | 4 |
| Cycle time | - min |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Dishwashing programs | Auto 45-70°C, Glass/delicate, Intensive, Quick |
| A+++ | |
| Energy consumption per cycle | 0.832 kWh |
| Water consumption per cycle | 9.9 L |
| Current | 10 A |
| Connected load | 2200 W |
| AC input frequency | 50 - 60 Hz |
| AC input voltage | 200 - 240 V |
| Annual energy consumption | 234 kWh |
| Annual water consumption | 2775 L |
| Drying class | A |
| Washing class | A |
| Width | 600 mm |
| Height | 850 mm |
| Depth | 625 mm |
| Weight | 47300 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Electrolux ESF5555LOX below.
In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner
It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.
The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.
Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.
The Electrolux ESF5555LOX has a weight of 47300 g.
The Electrolux ESF5555LOX has a height of 850 mm.
The Electrolux ESF5555LOX has a width of 600 mm.
The Electrolux ESF5555LOX has a depth of 625 mm.
Yes, the Electrolux ESF5555LOX has adjustable feet. This means that the user can easily level the dishwasher to ensure stability and proper functioning.
The energy efficiency class of the Electrolux ESF5555LOX is A+++. This means that it is one of the most energy-efficient dishwashers available, saving the user electricity and reducing their energy costs.
The Electrolux ESF5555LOX can accommodate 13 place settings. This is a high capacity, ideal for households with larger loads of dishes to wash.
The noise level of the Electrolux ESF5555LOX is 42 dB. This is considered to be a low noise level, providing a quiet and peaceful environment for the user while the dishwasher is running.
The Electrolux ESF5555LOX has 6 washing programs. This provides the user with a variety of options to cater to different types of dishes and levels of dirtiness.
To troubleshoot if the Electrolux ESF5555LOX dishwasher does not turn on when you press the power button, follow these steps: 1. Check the power connection: Ensure that the power cable is properly inserted into the power outlet. Make sure there are no loose connections or dislodged plugs. 2. Check the fuse: Verify that no fuse has tripped in the fuse box. If a fuse has tripped, reset it or replace it if necessary. 3. Close the door properly: Ensure that the dishwasher door is fully closed. If the door is not closed properly, the dishwasher will not start. 4. Press the Start button: Press the Start button firmly and hold it for a few seconds. Sometimes, a longer press is required to activate the dishwasher. 5. Check for delayed start: If you have set a delayed start, wait for the countdown to finish or cancel the delayed start setting. If the dishwasher still does not turn on after following these steps, it is recommended to contact an authorized service center for further assistance.
To troubleshoot if the Electrolux ESF5555LOX dishwasher does not fill with water when you start a program, follow these steps: 1. Check the water supply: Ensure that the water supply valve is fully open and that there is no blockage or kink in the water inlet hose. Make sure there is sufficient water pressure for the dishwasher to fill. 2. Clean the water inlet filter: Locate the water inlet filter, usually located at the bottom of the dishwasher. Remove any debris or sediment that may be blocking the filter. Rinse the filter under running water to remove any buildup. 3. Check the float switch: The float switch is a small device located at the bottom of the dishwasher. Make sure it moves freely and is not stuck in the raised position. If the float switch is stuck, it can prevent the dishwasher from filling with water. 4. Inspect the water inlet valve: The water inlet valve controls the flow of water into the dishwasher. Check for any signs of damage or blockage in the valve. If the valve is faulty, it may need to be replaced. 5. Contact customer support: If the dishwasher still does not fill with water after following these steps, it is recommended to contact Electrolux customer support for further assistance. Please note that these troubleshooting steps are provided as a general guide and may vary depending on the specific model of the Electrolux ESF5555LOX dishwasher.
To troubleshoot if the Electrolux ESF5555LOX dishwasher does not dispense the detergent properly during a wash cycle, follow these steps: 1. Check the detergent compartment: Ensure that the detergent compartment is clean and free from any residue or clogs. Remove any leftover detergent or debris that may be blocking the dispenser. 2. Use the correct detergent: Make sure you are using the recommended dishwasher detergent for optimal performance. Using the wrong type or amount of detergent can affect the dispensing process. 3. Load the dishwasher correctly: Properly load the dishwasher, ensuring that dishes and utensils do not obstruct the detergent dispenser. Avoid overcrowding the dishwasher, as this can prevent the detergent from being dispensed effectively. 4. Check water temperature: Ensure that the water temperature is hot enough for the detergent to dissolve properly. If the water is not hot enough, it may affect the detergent's ability to dispense and clean effectively. 5. Contact customer support: If the dishwasher still does not dispense the detergent properly after following these steps, it is recommended to contact Electrolux customer support for further assistance. Please note that these troubleshooting steps are provided as a general guide and may vary depending on the specific model of the Electrolux ESF5555LOX dishwasher.
To troubleshoot if the Electrolux ESF5555LOX dishwasher does not start or complete a program when you press the start button, follow these steps: 1. Check the door latch: Ensure that the dishwasher door is fully closed and latched securely. If the door is not closed properly, the dishwasher will not start or complete a program. 2. Verify the water supply: Make sure that the water supply valve is fully open and that there is sufficient water pressure for the dishwasher to operate. Low water pressure can prevent the dishwasher from starting or completing a program. 3. Check for error codes: Look for any error codes or indicators on the dishwasher's control panel. Refer to the user manual for a list of error codes and their corresponding troubleshooting steps. 4. Reset the dishwasher: Try resetting the dishwasher by turning off the power at the circuit breaker or unplugging it for a few minutes. Then, restore power and try starting a program again. 5. Contact customer support: If the dishwasher still does not start or complete a program after following these steps, it is recommended to contact Electrolux customer support for further assistance. Please note that these troubleshooting steps are provided as a general guide and may vary depending on the specific model of the Electrolux ESF5555LOX dishwasher.
To troubleshoot if the Auto Off function of the Electrolux ESF5555LOX dishwasher is not working as expected, follow these steps: 1. Check the door opening: Ensure that the dishwasher door is not opened during the operation of a program. Opening the door can interrupt the Auto Off function and affect energy consumption and program duration. If the door is opened during the drying phase for more than 30 seconds, the current program will stop. Avoid closing the door within 2 minutes after the automatic opening by the AirDry function to prevent damage. 2. Cancel delayed start: If you have set a delayed start, cancel it by adjusting the program and options. Press and hold the Programs and Options buttons simultaneously until the dishwasher enters Programming mode. 3. Cancel the program: If needed, cancel the current program by pressing and holding the Programs and Options buttons simultaneously until the dishwasher enters Programming mode. 4. Check detergent dispenser: Before starting a new wash program, ensure that the detergent dispenser is not empty. Refill it if necessary. 5. End of program: Once the program is completed, the display will show 0:00 and the phase indicators will turn off. All buttons, except the On/Off button, will be inactive. To turn off the dishwasher, press the On/Off button or wait for the Auto Off function to automatically turn it off. If the Auto Off function still does not work as expected after following these steps, it is recommended to contact Electrolux customer support for further assistance. Please note that these troubleshooting steps are provided as a general guide and may vary depending on the specific model of the Electrolux ESF5555LOX dishwasher.
To troubleshoot if the dishwasher does not start a program with a delayed start as set, follow these steps: 1. Verify the delayed start setting: Check the display to ensure that the delayed start setting is correctly programmed. Make sure the desired start time is set and that there are no errors or interruptions indicated on the display. 2. Check the power supply: Ensure that the dishwasher is properly connected to a power source and that the power is turned on. Verify that there are no power outages or issues with the electrical circuit. 3. Confirm the water supply: Make sure that the water supply valve is fully open and that there is sufficient water pressure for the dishwasher to operate. Low water pressure can affect the delayed start function. 4. Close the door properly: Ensure that the dishwasher door is fully closed and latched securely. If the door is not closed properly, the delayed start function may not activate. 5. Contact customer support: If the dishwasher still does not start with a delayed start as set after following these steps, it is recommended to contact Electrolux customer support for further assistance. Please note that these troubleshooting steps are provided as a general guide and may vary depending on the specific model of the Electrolux ESF5555LOX dishwasher.
Yes, the manual of the Electrolux ESF5555LOX is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Electrolux and is the answer not in the manual?
Question and answer
Number of questions: 0