Electro Harmonix V256 Vocoder manual

Electro Harmonix V256 Vocoder
(1)
  • Number of pages: 16
  • Filetype: PDF
2
- QUICK START GUIDE -
BASIC MIXER CONNECTION SETUP
1. Connect your microphone to the MIC input on the right side of the V256 using a
balanced XLR cable.
2. Using an unbalanced instrument cable, plug your instrument into the INST Input Jack on
the right side of the V256.
3. Connect a balanced XLR cable to the EFFECT output jack on the left side of the V256.
Connect the other end of the XLR cable to the line input of a mixer.
4. Connect an unbalanced instrument cable from the INST output jack on the left side of
the V256. Connect the other end of the instrument cable to the instrument input of a
mixer, or the input of an amplifier.
5. Plug the AC Adapter into a wall outlet.
6. Plug the barrel connector of the AC Adapter into the 9V power jack at the top of the
V256.
Polarity is center negative
.
7. If using a condenser microphone, flip the Phantom Power switch up to the top position,
otherwise leave it off. The Phantom Power switch is located on the right side of the
V256, next to the XLR MIC input.
8. Push the MIC BYPASS footswitch until its associated LED is OFF. Sing into the
microphone, you will hear your dry vocal at this point. Adjust mixer settings as well as
the MIC GAIN switch on the V256 to obtain optimal mic levels.
BASIC AMPLIFIER CONNECTION SETUP
1. Connect your microphone to the MIC input on the right side of the V256 using a
balanced XLR cable.
2. Using an unbalanced instrument cable, plug your instrument into the INST Input Jack on
the right side of the V256.
3. Connect an unbalanced instrument cable from the INST output jack on the left side of
the V256. Connect the other end of the instrument cable to the input of a guitar, bass,
or keyboard amplifier.
4. Plug the AC Adapter into a wall outlet.
5. Plug the barrel connector of the AC Adapter into the 9V power jack at the top of the
V256.
Polarity is center negative
.
6. If using a condenser microphone, flip the Phantom Power switch up to the top position,
otherwise leave it off. The Phantom Power switch is located on the right side of the
V256, next to the XLR MIC input.
7. Push the MIC BYPASS footswitch until its associated LED is OFF. Play the instrument,
you will hear only dry instrument signal at this point.
Electro Harmonix V256 Vocoder

Need help?

Number of questions: 0

Do you have a question about the Electro Harmonix V256 Vocoder or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Electro Harmonix V256 Vocoder owners to properly answer your question.

View the manual for the Electro Harmonix V256 Vocoder here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Electro Harmonix V256 Vocoder or do you need help? Ask your question here

Electro Harmonix V256 Vocoder specifications

General
Brand Electro Harmonix
Model V256 Vocoder
Product Not categorized
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Electro Harmonix V256 Vocoder.

Is your question not listed? Ask your question here