Name: Electro Harmonix Nano Looper 360
Brand: Electro Harmonix
SKU: 1456815
Rating: 88 (1 reviews)

manualElectro Harmonix Nano Looper 360

1

NANO LOOPER 360

Compact Looper

Congratulations on your purchase of the Nano Looper 360! The Nano Looper 360 is a

small, extremely easy to use looper with a total of 360-seconds of loop recording time. Not

only that, the available 360 seconds can be divided into 11 different Loops, so you get the

most out of the available memory! You can think of the Nano Looper 360 as your very own

“Loop Locker.”

WARNING: Your Nano Looper 360 comes equipped with an Electro-Harmonix 9.6DC-

200BI power supply (same as used by Boss

& Ibanez

: 9.6 Volts DC 200mA). The Nano

Looper 360 requires 90mA at 9VDC with a center negative plug. Using the wrong adapter

or plug polarity may damage your unit and void the warranty.

– FEATURES –

- 6 minutes of loop recording time

- 11 selectable, independent Loops, that remain in memory until you erase them

- High quality, uncompressed audio: 24-bit A/D/A, 44.1kHz Sample Rate

- Intuitive looping interface

- Undo-Redo function

- Unlimited overdubbing

- Small pedal board footprint

- AC Adapter Included

- Optionally may use 9V Alkaline Battery, battery life: approximately 4 hours of operation

(varies on conditions of use)

– CONTROLS –

LEVEL Knob – Controls the output level of the Loop. Your dry signal remains at unity

signal level from input to output. The dry signal also remains analog throughout the 360.

LOOP Knob – Selects Loop number: 1-11. When scrolling through loops, the MEM LED

flashes quickly during transitions. If the loop has no recorded memory, the MEM LED

remains off. If the loop has recorded memory, the MEM LED remains on and playback can

begin.

INPUT Jack – This ¼” jack is the audio input for the Nano Looper 360. The input

impedance is 2.2M.

OUTPUT Jack – This ¼” jack is the audio output from the Nano Looper 360. The output

impedance is 470.

9V Power Jack – Plug the output of the supplied AC adapter into the 9V power jack

located at the top of the Nano Looper 360. The Nano Looper 360 draws 90mA at 9VDC

with a center negative plug. The Nano Looper 360 accepts Boss

and Ibanez

style AC

Adapters.

View the manual for the Electro Harmonix Nano Looper 360 here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Electro Harmonix Nano Looper 360 or do you need help? Ask your question here

Need help?

Do you have a question about the Electro Harmonix and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Electro Harmonix owners to provide you with a good answer.

Number of questions: 0

General

	Electro Harmonix
	Nano Looper 360
	Not categorized
	English
	User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Electro Harmonix Nano Looper 360 below.

Is your question not listed? Ask your question here

No results