View the manual for the Einhell TE-RH 26 4F here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Einhell TE-RH 26 4F or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Einhell TE-RH 26 4F.
| Brand | Einhell |
| Model | TE-RH 26 4F | 4257960 |
| Product | drill machine |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Drilling | Yes |
| Hammer drilling | Yes |
| Chiseling | Yes |
| Chuck type | SDS Plus |
| Adjustable speed | Yes |
| Product color | Black, Red |
| Impact energy (max) | 2.6 J |
| Rated speed (max) | 4500 RPM |
| Idle speed (max) | 930 RPM |
| Drilling diameter in concrete (max) | 26 mm |
| Width | 123 mm |
| Depth | 396 mm |
| Height | 358 mm |
| Weight | 3200 g |
| Power source | AC |
| Input power | 800 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Carrying case | Yes |
| Auxiliary handle | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Einhell TE-RH 26 4F below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Einhell TE-RH 26 4F has a weight of 3200 g.
The Einhell TE-RH 26 4F has a height of 358 mm.
The Einhell TE-RH 26 4F has a width of 123 mm.
The Einhell TE-RH 26 4F has a depth of 396 mm.
Yes, the manual of the Einhell TE-RH 26 4F is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Einhell and is the answer not in the manual?
Question and answer
Number of questions: 0