View the manual for the Einhell TC-WW 1000/1 here, for free. This manual comes under the category not categorized and has been rated by 7 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Einhell TC-WW 1000/1 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Einhell TC-WW 1000/1.
| Brand | Einhell |
| Model | TC-WW 1000/1 | 4312110 |
| Product | not categorized |
| EAN | 4006825633924 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Purpose | Woodworking |
| Rotational speed (min) | 890 RPM |
| Rotational speed (max) | 2600 RPM |
| PC connected | No |
| Number of speeds | 4 |
| Motor power | 400 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Width | 228 mm |
| Depth | 895 mm |
| Height | 385 mm |
| Weight | 22860 g |
| Package weight | 25570 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Einhell TC-WW 1000/1 below.
The Einhell TC-WW 1000/1 has a weight of 22860 g.
The Einhell TC-WW 1000/1 has a height of 385 mm.
The Einhell TC-WW 1000/1 has a width of 228 mm.
The Einhell TC-WW 1000/1 has a depth of 895 mm.
Before starting, ensure that you have aligned the parts correctly, securing them tightly with the provided screws and bolts. Pay attention to the manual's diagrams for proper orientation and insertion of each component.
The Einhell TC-WW 1000/1 is capable of planing wood up to a maximum thickness of 15 centimeters. However, it is important to note that thinner cuts typically yield better results.
To adjust the depth of cut, locate the depth control knob, usually situated on the side of the machine. Rotating the knob clockwise increases the depth, while rotating it counterclockwise reduces it. Experiment with shallow cuts at first and gradually increase the depth as needed.
The Einhell TC-WW 1000/1 does not have adjustable speed settings. It operates at a fixed speed suitable for most types of wood. However, it is advisable to plan with a slower feed rate for hardwoods, ensuring cleaner and smoother results.
After using the planer, always disconnect it from the power source. To clean, use a soft brush or cloth to remove wood dust and debris from the machine's surfaces, as well as the cutting blades. Avoid using water or solvents and ensure all parts are dry before storing the planer.
Yes, the Einhell TC-WW 1000/1 is designed for woodworking purposes. This means that it is optimized for cutting, shaping, and joining wood.
The Einhell TC-WW 1000/1 has a minimum rotational speed of 890 RPM and a maximum rotational speed of 2600 RPM. This range allows for versatility in different woodworking tasks.
No, the Einhell TC-WW 1000/1 does not have PC connectivity. This means that it cannot be directly connected to a computer for digital control or monitoring.
The Einhell TC-WW 1000/1 has a motor power of 400 W. This indicates the strength of the motor and its ability to handle woodworking tasks.
The Einhell TC-WW 1000/1 has 4 speeds. This allows for more flexibility and control when working with different types of wood and for various woodworking techniques.
Yes, the manual of the Einhell TC-WW 1000/1 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Einhell and is the answer not in the manual?
Question and answer
Number of questions: 3Is there a thread where the faceplate is mounted, is it normal for it to have a 5mm inward and outward play? And another question, can it happen that the wheels rub against the door where the drive is located? It has happened before, why?
This message has been automatically translatedI would like to know, (Einhell TC-WW 1000) what kind of threading number 2 is, and if a faceplate is available for separate purchase, and how much it costs.
This message has been automatically translatedWhat it the thread size of the spindle please