View the manual for the Einhell TC-AG 115 here, for free. This manual comes under the category grinders and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Einhell TC-AG 115 or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the Einhell TC-AG 115.
| Brand | Einhell |
| Model | TC-AG 115 | 4430618 |
| Product | grinder |
| EAN | 4006825603279 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Idle speed (max) | 12000 RPM |
| Grinding disc diameter | 115 mm |
| Product color | Black, Red, Silver |
| Power source | AC |
| Input power | 500 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Number of grinding discs | 1 |
| Width | 95 mm |
| Height | 120 mm |
| Length | 297 mm |
| Weight | 1810 g |
| Package weight | 1680 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Einhell TC-AG 115 below.
The Einhell TC-AG 115 has a weight of 1810 g.
The Einhell TC-AG 115 has a height of 120 mm.
The Einhell TC-AG 115 has a width of 95 mm.
Yes, Einhell TC-AG 115 has an idle speed of 12000 RPM, which is relatively high compared to other similar grinders on the market.
Yes, Einhell TC-AG 115 is powered by AC, making it suitable for indoor use where power outlets are readily available.
The input power of Einhell TC-AG 115 is 500 Watts, which is considered to be mid-range in terms of power output for grinders in its class.
Einhell TC-AG 115 comes with 1 grinding disc, which is standard for most grinders of this size.
The grinding disc diameter of Einhell TC-AG 115 is 115 mm, which is a common size for angle grinders used for various grinding tasks.
To secure the additional handle on the Einhell TC-AG 115 grinder, follow these steps: 1. The angle grinder must not be used without the additional handle. 2. The additional handle can be secured in either of the two positions, A or B, depending on whether you are a right-handed or left-handed user. 3. Ensure that the additional handle is securely attached to provide better control and stability during operation. 4. Make sure to adjust the guard to protect your hands and position it to direct the material away from your body. 5. The guard's position can be adjusted as needed for specific working conditions by undoing the screw, turning the cover, and retightening the screw. 6. Always double-check that the guard is correctly covering the gear wheel casing and is securely in place.
To ensure that the guard on the Einhell TC-AG 115 grinder correctly covers the gear wheel casing, follow these steps: 1. Switch off the grinder and unplug it for safety. 2. Adjust the guard to direct the material being ground away from your body. 3. Undo the screw and turn the guard cover into the required position. 4. Make sure the guard completely covers the gear wheel casing. 5. Retighten the screw securely to hold the guard in place. 6. Confirm that the guard is firmly attached before using the grinder. Remember, never operate the angle grinder without the guard properly covering the gear wheel casing to prevent accidents.
Yes, the manual of the Einhell TC-AG 115 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Einhell and is the answer not in the manual?
Question and answer
Number of questions: 0