Einhell GE-SP 4390 N-A LL Eco manual

Einhell GE-SP 4390 N-A LL Eco
8.9 · 1
PDF manual
 · 126 pages
English
manualEinhell GE-SP 4390 N-A LL Eco
The Einhell GE-SP 4390 N-A LL ECO clear water pump features Eco Power to make it particularly eco-friendly. With 430 W of power the pump has an
immersion depth of up to seven meters and works in shallow water as low as 1 mm, so all that is left can be wiped dry. Thanks to Aqua Sensor
technology the pump can operate with patented sensor adjustment at three automatic starting heights or be used for continuous operation. The pump
housing made of impact-resistant plastic with a stainless steel outer shell and a high-grade mechanical seal ensure a long service life. The pump
features an ergonomic carry-handle, integrated suspension eyelet, non-return valve and universal hose connection.

Clear Water Pump

GE-SP 4390 N-A LL ECO

Item No.: 4171440

Ident No.: 11029

Bar Code: 4006825622263

Features & Benefits

Aqua sensor with three automatic sensor starting heights-
Permanent mode-
Low-level suction down to 1 mm residual water level-
ECO Power: higher delivery rate, lower power consumption-
Ergonomic carrying handle-
High-quality mech. seal for a long service life-
Easily reachable hose connection on the pump's topside-
Integrated suspension eyelet-
Housing made of impact-resistant plastic & stainless steel shell-
Incl. universal connector-
Non-return valve-

Technical Data

- Mains supply 230 V | 50 Hz
- Power 430 W
- Max. delivery capacity 9000 L/h
- Max. delivery height 8 m
- Max. immersion depth 7 m
- Max. water temperature 35 °C
- Hose connection 47,8mm (G11/2 AG)
- Power cord 10 m | H05RN-F

Logistic Data

- Product weight 4.9 kg
- Gross weight single packaging 6.5 kg
- Dimensions single packaging 250 x 230 x 360 mm
- Pieces per export carton 2 Pieces
- Gross weight export carton 13.8 kg
- Dimensions Export Carton 480 x 270 x 370 mm
- Container quantity (20"/40"/40"HC) 2842 | 1188 | 2436
Illustrations can contain accessories, which are not included in standard extent of delivery
Illustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessory
Generated at: 09.10.2019 13:19
Page 1

Manual

View the manual for the Einhell GE-SP 4390 N-A LL Eco here, for free. This manual comes under the category pumps and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Einhell GE-SP 4390 N-A LL Eco or do you need help? Ask your question here

Need help?

Do you have a question about the Einhell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Einhell GE-SP 4390 N-A LL Eco specifications

Below you will find the product specifications and the manual specifications of the Einhell GE-SP 4390 N-A LL Eco.

The Einhell GE-SP 4390 N-A LL Eco is an external water pump designed for outdoor use. It has a compact size, with dimensions of 230 millimeters in width, 250 millimeters in depth, and 360 millimeters in height. The pump weighs 4900 grams, while the package weight is 6500 grams. This model comes with a 10-meter-long cable, providing flexibility and convenience in installation. With a power of 430 watts, the GE-SP 4390 N-A LL Eco operates on AC power source. It is specifically designed as an external water pump, making it suitable for various outdoor applications such as garden irrigation, water supply from wells or tanks, and rainwater harvesting. Its power and efficiency enable it to effectively pump water over long distances or to higher elevations. The construction of this pump ensures durability and long-lasting performance. The materials used are of premium quality, increasing its reliability even when exposed to different weather conditions or demanding tasks. With its robust design, it can withstand the rigors of outdoor use and provide consistent water pumping. In summary, the Einhell GE-SP 4390 N-A LL Eco is a compact and powerful external water pump suitable for outdoor use. With its AC power source and 430-watt power, it is capable of efficiently pumping water over long distances or to higher elevations. Its premium construction materials guarantee reliability and durability, making it a dependable choice for various outdoor water-related applications.

General
BrandEinhell
ModelGE-SP 4390 N-A LL Eco | 4171440
Productpump
EAN4006825622263
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Features
Product typeExternal water pump
Type-
Proper useWater-supply
Suitable for outdoor useYes
Suitable for indoor use-
Product colorBlack, Red
Housing materialPlastic, Stainless steel
Weight & dimensions
Width230 mm
Depth250 mm
Height360 mm
Weight4900 g
Packaging data
Package weight6500 g
Ports & interfaces
Cable length10 m
Power
Power cable typeH05RN-F
Power430 W
Power source typeAC
AC input voltage230 V
AC input frequency50 Hz
Performance
Maximum delivery height8 m
Flow rate9000 l/h
Maximum operating pressure- bar
Ergonomics
Carrying handle(s)Yes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Einhell GE-SP 4390 N-A LL Eco below.

What is the weight of the Einhell GE-SP 4390 N-A LL Eco?

The Einhell GE-SP 4390 N-A LL Eco has a weight of 4900 g.

What is the height of the Einhell GE-SP 4390 N-A LL Eco?

The Einhell GE-SP 4390 N-A LL Eco has a height of 360 mm.

What is the width of the Einhell GE-SP 4390 N-A LL Eco?

The Einhell GE-SP 4390 N-A LL Eco has a width of 230 mm.

What is the depth of the Einhell GE-SP 4390 N-A LL Eco?

The Einhell GE-SP 4390 N-A LL Eco has a depth of 250 mm.

Is the Einhell GE-SP 4390 N-A LL Eco suitable for outdoor use?

Yes, the Einhell GE-SP 4390 N-A LL Eco is suitable for outdoor use. This means that the user can confidently use it in various outdoor environments without worrying about its performance or durability.

What is the power of the Einhell GE-SP 4390 N-A LL Eco?

The Einhell GE-SP 4390 N-A LL Eco has a power of 430 W. This power rating indicates that it is capable of delivering a sufficient amount of power for its intended applications, making it suitable for a wide range of pumping tasks.

What is the maximum delivery height of the Einhell GE-SP 4390 N-A LL Eco?

The Einhell GE-SP 4390 N-A LL Eco has a maximum delivery height of 8 m. This means that it can effectively pump water to a height of up to 8 meters, making it suitable for applications such as garden irrigation or draining water from flooded areas.

What is the flow rate of the Einhell GE-SP 4390 N-A LL Eco?

The Einhell GE-SP 4390 N-A LL Eco has a flow rate of 9000 l/h. This high flow rate indicates that it can quickly and efficiently move a large volume of water, allowing for faster completion of pumping tasks compared to lower flow rate pumps.

Does the Einhell GE-SP 4390 N-A LL Eco have a carrying handle?

Yes, the Einhell GE-SP 4390 N-A LL Eco has a carrying handle. This feature makes it easier for the user to transport the pump from one location to another, enhancing its portability and convenience.

How do I troubleshoot if the pump is not reaching the maximum flow rate?

To troubleshoot if the Einhell GE-SP 4390 N-A LL Eco pump is not reaching the maximum flow rate, you can follow these steps: 1. Check the intake sieve: The intake sieve may be clogged, restricting the flow of water. Clean the intake sieve with a water jet to remove any debris or blockages. 2. Verify the performance: If the water being pumped contains heavy contamination or abrasive impurities, it can reduce the pump's performance. Clean the intake sieve and inspect the equipment for any wear parts that may need replacement. 3. Check the hose: Ensure that the discharge hose is not kinked or bent, as this can restrict the flow of water. Straighten the hose to allow for smooth water flow. 4. Inspect the autostart level: Make sure the autostart level is set to the correct position. Adjust it if necessary to ensure proper operation. 5. Ensure proper water temperature: The pump is designed to operate within a maximum water temperature of 35°C. If the water temperature exceeds this limit, the motor circuit-breaker may switch off the equipment. Unplug the power plug, clean the equipment and shaft, and ensure that the water temperature is within the permissible range. By following these troubleshooting steps, you can identify and resolve issues that may be preventing the Einhell GE-SP 4390 N-A LL Eco pump from reaching its maximum flow rate.

What should I do if the pump is not properly installed with a fixed pipeline or flexible hose?

To properly install the Einhell GE-SP 4390 N-A LL Eco pump with a fixed pipeline or flexible hose, follow these steps: 1. Stationary installation with a fixed pipeline: - Choose the appropriate diameter of the pipeline for maximum flow rate. - Attach the pump to a hanging loop using a rope for stability. - Ensure the pipeline is properly connected to the pump's outlet. - Check for any leaks or loose connections in the pipeline. - Secure the pipeline to prevent movement or disconnection during operation. 2. Stationary installation with a flexible hose: - Select a flexible hose with the largest possible diameter for optimal flow rate. - Attach the pump to a hanging loop using a rope for stability. - Connect one end of the hose to the pump's outlet. - Attach the other end of the hose to the desired discharge point. - Ensure the hose is not kinked or bent, as this can restrict water flow. - Check for any leaks or loose connections in the hose. By following these steps, you can ensure that the Einhell GE-SP 4390 N-A LL Eco pump is properly installed with either a fixed pipeline or a flexible hose, allowing for efficient and effective water pumping.

How can I troubleshoot if the pump is not securely attached to the hanging loop?

To troubleshoot if the Einhell GE-SP 4390 N-A LL Eco pump is not securely attached to the hanging loop, follow these steps: 1. Ensure proper installation: Check if the pump is correctly installed according to the instructions provided in the manual. Verify that the hanging loop is securely attached to a stable structure. 2. Inspect the hanging loop: Examine the hanging loop for any damage or wear. Make sure it is in good condition and can support the weight of the pump. 3. Adjust the rope: If the pump is not securely attached, adjust the rope that connects the pump to the hanging loop. Ensure that the rope is tightly secured and provides stability to the pump. 4. Verify the connection: Double-check the connection between the pump and the hanging loop. Ensure that it is properly fastened and there are no loose or missing parts. 5. Seek professional assistance: If you are unable to securely attach the pump to the hanging loop or if you have any doubts about the installation, it is recommended to seek assistance from a qualified professional or contact the manufacturer's customer support for further guidance. By following these steps, you can troubleshoot and address any issues related to the secure attachment of the Einhell GE-SP 4390 N-A LL Eco pump to the hanging loop.

What should I check if the pump is not functioning after connecting it to the power supply?

To troubleshoot if the Einhell GE-SP 4390 N-A LL Eco pump is not functioning after connecting it to the power supply, follow these steps: 1. Check power supply: Ensure that the power supply is properly connected and turned on. Verify that the socket-outlet is in good working order and sufficiently fused (at least 6 A). 2. Verify autostart level: Observe the autostart level settings and make sure it is set to the correct position. Adjust the autostart level if necessary. 3. Inspect power connection: Check the power plug and socket-outlet for any signs of damage or moisture. Ensure that the power connection is secure and that no moisture or water can reach the power connection. 4. Troubleshoot motor circuit-breaker: If the equipment switches off after briefly running, it may be due to excessive water contamination or high water temperature. Unplug the power plug, clean the equipment and shaft, and ensure that the water temperature does not exceed the maximum permissible limit of 35°C. 5. Seek professional assistance: If the pump still does not function after performing the above steps, it is recommended to seek assistance from a qualified professional or contact the manufacturer's customer support for further guidance. By following these troubleshooting steps, you can identify and address common issues that may prevent the Einhell GE-SP 4390 N-A LL Eco pump from functioning properly after connecting it to the power supply.

How do I troubleshoot if the pump is experiencing dry running?

To troubleshoot if the Einhell GE-SP 4390 N-A LL Eco pump is experiencing dry running, follow these steps: 1. Check the autostart level: Ensure that the autostart level is set to the correct position. Adjust the autostart level if necessary. 2. Inspect the intake sieve: Check if the intake sieve is clogged. Clean the intake sieve using a water jet to remove any debris or blockages. 3. Verify the discharge hose: Ensure that the discharge hose is not kinked or bent, as this can restrict the flow of water. Straighten the hose to allow for smooth water flow. 4. Clean the equipment: If the pump is still experiencing dry running, clean the equipment and replace any worn-out parts. This will help maintain optimal performance. 5. Seek professional assistance: If the issue persists or if you are unsure about troubleshooting dry running, it is recommended to seek assistance from a qualified professional or contact the manufacturer's customer support for further guidance. By following these steps, you can troubleshoot and address the issue of dry running in the Einhell GE-SP 4390 N-A LL Eco pump.

Is the manual of the Einhell GE-SP 4390 N-A LL Eco available in English?

Yes, the manual of the Einhell GE-SP 4390 N-A LL Eco is available in English .

Is your question not listed? Ask your question here

No results