Einhell CE-JS 18/1 manual

Einhell CE-JS 18/1
7.5 · 1
PDF manual
 · 134 pages
English
manualEinhell CE-JS 18/1

CE-JS 18/1

Art.-Nr.: 10.915.31 I.-Nr.: 21020

9
D Originalbetriebsanleitung
Fremdstarter – Energiestation
GB Original operating instructions
Jump Start – Power Bank
F Instructions d’origine
Démarreur externe – station
d’énergie
I Istruzioni per l’uso originali
Avviatore di emergenza – Carica-
batterie portatile
DK/ Original betjeningsvejledning
N Jumpstarter – Energistation
S Original-bruksanvisning
Starthjälp – Energistation
NL Originele handleiding
Externe starter – energiestation
E Manual de instrucciones original
Arrancador de batería - unidad
energética
FIN Alkuperäiskäyttöohje
Apukäynnistin / Varavirtalähde
RUS Оригинальное руководство по
эксплуатации
Внешний аккумуляторУзел
электропитания
SLO Originalna navodila za uporabo
Zunanji zaganjač – Energetska
postaja
RO Instrucţiuni de utilizare originale
Starter auto – Staţie de energie
GR Πρωτότυπες Οδηγίες χρήσης
Βοηθητική εξωτερική εκκίνηση -
μονάδα ενέργειας
Anl_CE_JS_18_1_SPK9.indb 1Anl_CE_JS_18_1_SPK9.indb 1 08.02.2021 10:28:2208.02.2021 10:28:22

View the manual for the Einhell CE-JS 18/1 here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Einhell CE-JS 18/1 or do you need help? Ask your question here

Need help?

Do you have a question about the Einhell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandEinhell
ModelCE-JS 18/1
Productpower bank
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Einhell CE-JS 18/1 below.

How do I properly connect and charge my devices using the USB outlets of the Einhell CE-JS 18/1 power bank?

To properly connect and charge your devices using the USB outlets of the Einhell CE-JS 18/1 power bank, follow these steps: 1. Connect the USB connection cable to the USB port on the power bank and then to the device you want to charge. Make sure the device is compatible with the USB outlet you are using. 2. Press the ON/OFF button on the power bank to activate the charging process. 3. If you are using the 5V/2A USB outlet, connect the USB cable to the USB port and the device. Press the ON/OFF button to start the charging process. 4. If you are using the "OUT 5V/9V" USB outlet, connect the 3-in-1 USB cable to the USB port and the device. Press the ON/OFF button to initiate the charging process. Note that this outlet may provide faster charging times compared to the 5V/2A outlet. 5. Ensure that the cumulative output current of the USB outlets does not exceed 5A. By following these steps, you can properly connect and charge your devices using the USB outlets of the Einhell CE-JS 18/1 power bank.

Why is the battery capacity indicator not showing any LEDs when I press the button?

The battery capacity indicator of the Einhell CE-JS 18/1 power bank may not show any LEDs when you press the button due to the following reasons: 1. Insufficient charge: If the power bank has a very low charge level, the battery capacity indicator may not display any LEDs. Try charging the power bank using the supplied charger for approximately 6 hours until all the LEDs shine. 2. Defective indicator: There could be a malfunction with the battery capacity indicator itself. In this case, it is recommended to contact Einhell customer support for further assistance. 3. Incorrect button press: Ensure that you are pressing the ON/OFF button briefly and correctly. Pressing the button for too long or not pressing it firmly enough may result in no LEDs being displayed. 4. Faulty connection: Check the connection between the power bank and the device you are using to charge it. Make sure the USB cable is securely connected to both the power bank and the device. If the battery capacity indicator still does not show any LEDs after checking these factors, it is advisable to seek technical support from Einhell for troubleshooting and potential repairs.

Can I use the Einhell CE-JS 18/1 power bank to charge my laptop?

Yes, you can use the Einhell CE-JS 18/1 power bank to charge your laptop. Here are the steps to do so: 1. Check the power requirements of your laptop: Ensure that your laptop is compatible with the power bank's output voltage and current. The CE-JS 18/1 power bank provides a 19V DC output. 2. Connect the power bank to your laptop: Use the appropriate cable or adapter to connect the power bank's 19V DC outlet to your laptop's charging port. Make sure the connection is secure. 3. Activate the charging process: Press the ON/OFF button on the power bank to initiate the charging process. The power bank will supply power to your laptop. 4. Monitor the charging progress: Keep an eye on your laptop's battery indicator to track the charging progress. The charging time may vary depending on your laptop's battery capacity. 5. Disconnect and store: Once your laptop is fully charged, disconnect the power bank from your laptop and store it in a safe place. By following these steps, you can use the Einhell CE-JS 18/1 power bank to charge your laptop.

How long does it take to fully charge the power bank using the supplied charger?

The Einhell CE-JS 18/1 power bank takes approximately 6 hours to fully charge using the supplied charger. Here are the steps to charge the power bank: 1. Connect the supplied charger to the "15 V 1A input" charging jack on the power bank. 2. Plug the charger into a socket outlet. 3. The LED indicators on the power bank will flash during the charging process, indicating the charging status. 4. Once the charging is complete, all the LEDs will shine steadily. It is important to note that the charging time may vary depending on the current charge level of the power bank and the temperature of the battery pack. During the charging operation, a slight rise in the battery pack's temperature is normal. By following these steps, you can fully charge the Einhell CE-JS 18/1 power bank using the supplied charger in approximately 6 hours.

Why is the power bank not providing power to my 12V consumer device?

The Einhell CE-JS 18/1 power bank may not be providing power to your 12V consumer device due to the following reasons: 1. Power consumption exceeds the maximum limit: Ensure that the power consumption of your 12V consumer device does not exceed the maximum limit of 10A. If the device requires more power than the power bank can provide, it may not function properly. 2. Incorrect connection: Double-check the connection between the power bank and your 12V consumer device. Make sure the connection is secure and that the positive and negative terminals are correctly aligned. 3. Battery capacity: Check the current charge level of the power bank using the battery capacity indicator LEDs. If the power bank has a low charge, it may not be able to provide sufficient power to the device. In this case, recharge the power bank before attempting to power the 12V consumer device. If the power bank still does not provide power to your 12V consumer device after considering these factors, it is recommended to contact Einhell customer support for further assistance and troubleshooting.

Is the manual of the Einhell CE-JS 18/1 available in English?

Yes, the manual of the Einhell CE-JS 18/1 is available in English .

Is your question not listed? Ask your question here

No results