Einhell CE-JS 12/1 manual

Einhell CE-JS 12/1
7.5 · 1
PDF manual
 · 134 pages
English
manualEinhell CE-JS 12/1

CE-JS 12/1

Art.-Nr.: 10.915.21 I.-Nr.: 21020

9
D Originalbetriebsanleitung
Fremdstarter – Energiestation
GB Original operating instructions
Jump Start – Power Bank
F Instructions d’origine
Démarreur externe – station
d’énergie
I Istruzioni per l’uso originali
Avviatore di emergenza – Carica-
batterie portatile
DK/ Original betjeningsvejledning
N Jumpstarter – Energistation
S Original-bruksanvisning
Starthjälp – Energistation
NL Originele handleiding
Externe starter – energiestation
E Manual de instrucciones original
Arrancador de batería - unidad
energética
FIN Alkuperäiskäyttöohje
Apukäynnistin / Varavirtalähde
RUS Оригинальное руководство по
эксплуатации
Внешний аккумуляторУзел
электропитания
SLO Originalna navodila za uporabo
Zunanji zaganjač – Energetska
postaja
RO Instrucţiuni de utilizare originale
Starter auto – Staţie de energie
GR Πρωτότυπες Οδηγίες χρήσης
Βοηθητική εξωτερική εκκίνηση -
μονάδα ενέργειας
Anl_CE_JS_12_1_SPK9.indb 1Anl_CE_JS_12_1_SPK9.indb 1 27.01.2021 11:13:1827.01.2021 11:13:18

View the manual for the Einhell CE-JS 12/1 here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Einhell CE-JS 12/1 or do you need help? Ask your question here

Need help?

Do you have a question about the Einhell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandEinhell
ModelCE-JS 12/1
Productpower bank
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Einhell CE-JS 12/1 below.

How do I properly use the Einhell CE-JS 12/1 power bank to charge my smartphone?

To properly use the Einhell CE-JS 12/1 power bank to charge your smartphone, follow these steps: 1. Connect the supplied charger to the "15 V 1A input" charging jack on the power bank. 2. Plug the charger into a socket outlet to start the charging process. During charging, the LED indicators will flash and indicate the charging status. When charging is complete, all the LEDs will shine. 3. The charging time for a fully empty battery is approximately 5 hours. It is normal for the temperature of the battery pack to rise slightly during charging. 4. To check the battery capacity, briefly press the ON/OFF button. The LED indicators will light up, with the number of LEDs indicating the current charge level of the integrated Li-Po battery. - 4 LEDs steady on: 100% charged - 1 LED steady on: >25% charged - No LED steady on: <25% charged 5. To protect the integrated battery cells, the LED light will automatically switch off after approximately 4 hours of use. 6. To charge your smartphone, use the appropriate USB outlet on the power bank: - For devices that require 5V/2A charging, connect the USB connection cable to the USB port on the power bank and then to your device. - For devices that require 5V/9V charging, use the "OUT 5V/9V" USB outlet and connect the supplied 3-in-1 USB cable to the power bank and your device. 7. Press the ON/OFF button to start the charging process. The parameters required for charging will be determined at the USB outlet, and your device will start charging. 8. Make sure not to exceed the cumulative output current of 5A when using the USB ports in parallel. By following these steps, you can properly use the Einhell CE-JS 12/1 power bank to charge your smartphone.

What are the technical specifications of the Einhell CE-JS 12/1 power bank?

The technical specifications of the Einhell CE-JS 12/1 power bank are as follows: - Battery Capacity: The power bank is equipped with a Li-Po battery. - Input Voltage: The power bank can be charged with a 15V 1A input. - Output Voltage: The power bank provides a 5V/2A output for devices that require standard charging and a 5V/9V output for devices that support fast charging. - USB Outlets: The power bank has USB outlets for connecting and charging devices. - Jump Starting Current: The power bank is capable of jump starting vehicles with a maximum petrol engine capacity of 4000ccm and diesel engines with capacities of up to 2000ccm. - Ambient Temperature for Jump Starting: The power bank can be used for jump starting within a specified temperature range. - Storage Temperature: The power bank should be stored within a specified temperature range to maintain its performance and longevity. These specifications ensure that the Einhell CE-JS 12/1 power bank is capable of charging various devices and providing jump start support for vehicles within the specified capacities and temperature ranges.

What precautions should I take before connecting the Einhell CE-JS 12/1 power bank to the power supply?

Before connecting the Einhell CE-JS 12/1 power bank to the power supply, it is important to take the following precautions: 1. Check the Power Bank: Ensure that the power bank is in good condition and free from any visible damage or defects. 2. Read the Manual: Familiarize yourself with the user manual to understand the proper usage and safety instructions. 3. Use the Supplied Charger: Only use the charger provided with the power bank to ensure compatibility and safe charging. 4. Check the Power Supply: Ensure that the power supply you are connecting the power bank to is in good working condition and meets the required voltage and current specifications. 5. Connect the Charger: Plug the charger into the "15 V 1A input" charging jack on the power bank. 6. Connect to Power Supply: Plug the charger into a socket outlet that is easily accessible and compatible with the power bank's input voltage. 7. Observe Charging: Monitor the charging process and ensure that the LED indicators on the power bank are functioning properly and indicating the charging status. 8. Avoid Overcharging: Do not leave the power bank connected to the charger for an extended period of time once it is fully charged. 9. Disconnect Properly: When disconnecting the power bank from the power supply, unplug the charger from the socket outlet first before removing it from the power bank. By following these precautions, you can safely connect the Einhell CE-JS 12/1 power bank to the power supply and avoid any potential risks or damage.

How do I jump start a vehicle using the Einhell CE-JS 12/1 power bank?

To jump start a vehicle using the Einhell CE-JS 12/1 power bank, follow these steps: 1. Ensure that the power bank is fully charged and the battery capacity indicator shows at least 3 LED lights. 2. Open the cover on the jump start cable connection and plug the jump start cable into the power bank. 3. Connect the red cable to the positive pole and the black cable to the negative pole of the vehicle's battery. Ensure that the clamps are securely attached. 4. Check the status signals on the jump start cable: - "Correct" LED lights up green: All connections are correct, and the vehicle can be started within 30 seconds. - "Correct" LED flashes green: All connections are correct, but the car battery charge is very low. Press the "Boost" button on the jump start cable and wait until the "Correct" LED lights up continuously. Start the vehicle within 30 seconds. - Red LED lights up with an acoustic warning signal: The clamps are wrongly connected with reverse polarity. Remove the clamps and reconnect them with the correct polarity. - No LED lights up: Check all connections and ensure the clamps are connected with the correct polarity. If all connections are correct, the car battery may be defective. 5. Once the engine starts, remove the jump start cable from the power bank and then remove the red clamp from the car battery first, followed by the black clamp. 6. Let the engine run to allow the generator to charge the built-in car battery. By following these steps, you can safely jump start a vehicle using the Einhell CE-JS 12/1 power bank.

How do I clean and maintain the Einhell CE-JS 12/1 power bank?

To clean and maintain the Einhell CE-JS 12/1 power bank, follow these steps: 1. Power Off: Before cleaning, ensure that the power bank is turned off and disconnected from any power source. 2. Exterior Cleaning: Use a soft, dry cloth to gently wipe the exterior surfaces of the power bank to remove any dust or dirt. Avoid using abrasive materials or harsh chemicals. 3. Charging Port Cleaning: Inspect the charging port for any debris or dust. If necessary, use a clean, dry toothbrush or a soft brush to gently remove any particles. 4. Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it in humid or damp environments. 5. Regular Charging: To maintain the battery performance, it is recommended to charge the power bank at least once every three months, even if it is not in use. 6. Avoid Overcharging: Do not leave the power bank connected to the charger for an extended period of time once it is fully charged. 7. Handle with Care: Avoid dropping or subjecting the power bank to excessive force or impact, as this may damage the internal components. 8. Follow Safety Guidelines: Adhere to the safety guidelines provided in the user manual to ensure safe and proper usage of the power bank. By following these steps, you can effectively clean and maintain the Einhell CE-JS 12/1 power bank, ensuring its longevity and optimal performance.

Is the manual of the Einhell CE-JS 12/1 available in English?

Yes, the manual of the Einhell CE-JS 12/1 is available in English .

Is your question not listed? Ask your question here

No results