Edifier X220 manual

Edifier X220
  • Number of pages: 1
  • Filetype: PDF
Manual Edition 1.0 , August. 2010
1. Connecting the speakers
Connect the satellites to the speaker output port on the control panel of the subwoofer, using the 3.5mm connector cable attached
to the satellites.
2. Connect the audio sources (like a PC sound card, MP4 player or CD player) to “Line in“ on the control panel on the subwoofer, using
the 3.5mm connecting cable.
3. Plug & Play
Connect the A.C. power plug to the A.C. voltage outlet and adjust the master volume to a comfortable level to listen to music from any
audio source.
Thank you for purchasing this Edifier product. For generations, Edifier tries to provide powered speaker products to satisfy the need of our end
customers, even the most demanding ones. This product can add to your home entertainment, personal computer, and mini home theater great
sound performance. Please read this manual carefully to obtain the best of this system.
The lightning flash with arrowhead inside
thetriangle, is intended to alert the user
to the presence of un-insulated dangerous
voltage within the product's enclosure
that may be of a sufficient magnitude to
constitute a risk of electric shock to persons.
To prevent the risk of electric shock, do not
remove cover (or back). No user-serviceable
Parts inside. Refer servicing to qualified
Service personnel only.
The exclamation point inside the triangle is
intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
Please read all the instructions herein. Please retain this manual safely for future reference.
Please heed all safety warnings. Please install in accordance with the manufacturer's instructions.
Please adjust the volume control to a comfortable level to avoid damaging your hearing and the system.
• Do not expose this apparatus to rain or moisture.
• Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them.
• Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other.
• For added protection during lightning storms, unplug the speakers from the electrical outlet and turn off the computer.
• Unplug this apparatus when unused for long periods of time.
• Place the speakers away from all heat sources, such as heaters, stoves, and direct sunlight.
• Do not block the openings in the speaker cabinets. Never push objects into speaker vents or slots. Prevent risk of fire or
electric shock hazards, and provide sufficient space around the speakers for proper ventilation.
• Place the speakers in a stable location so that it will not fall causing damage to the speakers or bodily harm.
• Unplug the speakers from the computer and from the electrical outlet before cleaning them with a damp cloth.
• Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped. Refer all servicing to qualified service personnel only.
• Use the plug or the coupler inlet to disconnect with mains.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a
safety connection to electrical earth.
Box content
1 × Subwoofer
2 × Satellite speaker (with cable)
1 × 3.5-3.5mm audio connecting cable
1 × User manual

Illustration Setting up

Power output: R/L: RMS 6W×2(THD+N=10%, f =1KHz)
SW: RMS 10W(THD+N=10%, f =80Hz)
Signal to Noise ratio: 85dBA
Frequency response: R/L:170Hz~20KHz
Distortion: 0.5%
Input sensitivity: Satellite:600±50mV
Adjustment: Master volume control, bass switch
Bass unit: 4 inch(
106mm),magnetically shielded,4Ω
Tweeter driver: 2¾ inch(
70mm),magnetically shielded,4Ω
Dimension: Satellite:106×154×129mm
Net weight: 3.3kg
Gross weight: 4.


SubwooferSatellite speaker Satellite speaker3.5-3.5mm audio connecting cable
User manual
1. Master volume control
2. Bass switch
3. Line in
4. Speaker output
5. Power switch


Edifier X220

Need help?

Number of questions: 1

Do you have a question about the Edifier X220 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Edifier X220 owners to properly answer your question.

Mary • 10-12-2014 No comments

Can I connect this system to a mac pro or any apple product

Answer this question

View the manual for the Edifier X220 here, for free. This manual comes under the category Speakers and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Edifier X220 or do you need help? Ask your question here

Edifier X220 specifications

Brand Edifier
Model X220
Product Speaker
Language English
Filetype PDF
Audio output channels 2.1 channels
RMS rated power 12 W
Recommended usage -
Product colour Black
Magnetically shielded
Volume control Rotary
Amplification device included
Satellite speakers
Satellite speaker type -
Number of satellite speakers 2
Satellite speakers RMS power 12 W
Satellite speaker impedance 4 Ω
Satellite speaker tweeter diameter 2.5 "
Satellite speaker dimensions (WxDxH) 106 x 154 x 129 mm
Subwoofer type Active subwoofer
Subwoofer RMS power 10 W
Subwoofer impedance 4 Ω
Subwoofer driver diameter (imperial) 4 "
Bass adjustment
Subwoofer dimensions (W x D x H) 191 x 205 x 224 mm
Power source AC
Weight & dimensions
Set weight 4000 g
Ports & interfaces
Line-in connectivity 3.5 mm
Packaging content
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Edifier X220.

Is your question not listed? Ask your question here