View the manual for the EasyMaxx 08165 here, for free. This manual comes under the category alcohol testers and has been rated by 2 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the EasyMaxx 08165 or do you need help? Ask your question here
| Brand | EasyMaxx |
| Model | 08165 |
| Product | alcohol tester |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the EasyMaxx 08165 below.
To ensure that you are using the EasyMaxx 08165 alcohol tester properly, follow these steps: 1. Before using the device for the first time, carefully read through the instructions provided in the manual and store them in a safe place. These instructions are important and should be followed to ensure proper usage. 2. The device is designed for private use only, not for commercial use. Use the device only for its intended purpose as described in the instructions. Any other use is considered improper. 3. Make sure to clean the sensor of the device with a dry cloth before each use to remove any contamination that could affect the test result. 4. Press the Power button until you hear a signal tone to turn on the device. The display will switch on. 5. Wait for the "Warm up" countdown from 10 to 0 to complete. A signal will sound once the countdown is complete. 6. After the "Warm up," the "Blow" icon will appear on the display, and a new countdown from 10 to 0 will start. During this countdown, hold the sensor up to your mouth and blow forcefully into the sensor for approximately 3-5 seconds. 7. The device will display the calculated blood alcohol concentration (BAC) in grams per liter and percent. Please note that the displayed BAC may differ from the actual value. 8. The device will automatically switch off after a few seconds. A signal will sound when the device switches off. Remember to follow the safety notes mentioned in the manual, such as not using the device to determine if you are fit to drive or perform any other action under the influence of alcohol. Always observe the legal provisions for road traffic in your country of residence. Cleaning the sensor/device after each use with a dry cloth and using the specified battery type are also important for proper usage. Please note that these steps are a general guide for using the EasyMaxx 08165 alcohol tester properly. For detailed instructions and specific information, refer to the manual provided with the product.
If the EasyMaxx 08165 alcohol tester is not providing accurate results, you can try the following steps: 1. Ensure that the sensor of the device is clean. Use a dry cloth to wipe the sensor and remove any contamination that could affect the test result. 2. Make sure that you are following the proper usage instructions as described in the manual. Pay attention to the warm-up phase and the blowing process during the measurement. 3. Wait for at least 20 minutes after consuming alcohol before performing a measurement. Avoid eating, smoking, or drinking during this time. 4. Check the battery power of the device. Low batteries may affect the accuracy of the measurements. If the battery power is diminishing, replace the batteries with the specified battery type. 5. Consider performing multiple measurements to ensure accuracy. If necessary, wait for 2-3 minutes between two measurements. 6. Take into account external factors that may affect the accuracy of the reading. Closed, poorly ventilated rooms or air-conditioned rooms may impact the results. If needed, measure your blood alcohol concentration (BAC) 2-3 times. 7. If you have not used the device for a prolonged period or before the first use, perform 2-3 test measurements before the actual measurement. Remember that the displayed BAC may differ from the actual value, and the device is designed for private use only. If the issue persists or you have further concerns, contact the customer service department for assistance.
To replace the batteries in the EasyMaxx 08165 alcohol tester, follow these steps: 1. Open the battery compartment on the backside of the device by pushing it open. 2. Remove the empty batteries from the compartment and dispose of them in an environmentally-friendly manner. Please note that rechargeable batteries and regular batteries should be disposed of separately. 3. Insert two new 1.5 V batteries of type AAA into the battery compartment. Make sure to align the polarity (+/-) correctly. 4. Close the battery compartment by pushing the battery compartment cover back onto the battery compartment. Please note that it is important to use the specified battery type and to follow the correct polarity when inserting the batteries. This ensures proper functioning of the device. If you have any further questions or encounter any difficulties during the battery replacement process, please contact the customer service center of DS Produkte GmbH, the importer of the EasyMaxx 08165 alcohol tester. Their contact information is as follows: Am Heisterbusch 1, 19258 Gallin, Germany, Tel.: +49 (0) 38851 314650. Remember to dispose of the old batteries at appropriate collection points to protect the environment and comply with applicable statutory provisions.
If the sensor of the EasyMaxx 08165 alcohol tester gets dirty or contaminated, follow these steps to clean it: 1. Turn off the device and remove any batteries to ensure safety during the cleaning process. 2. Use a dry cloth or tissue to gently wipe the sensor surface. Avoid using any chemicals, solvents, or aggressive cleaners as they may damage the sensor. 3. If the sensor is heavily contaminated or has stubborn residue, you can moisten a cloth or tissue with a small amount of isopropyl alcohol (70% concentration) and gently wipe the sensor surface. Be careful not to saturate the sensor or allow any liquid to enter the device. 4. After cleaning, allow the sensor to air dry completely before reassembling the device and inserting the batteries. 5. Perform a test measurement without consuming alcohol to ensure that the sensor is functioning properly and providing accurate results. Remember to clean the sensor after each use to maintain its performance and accuracy. Avoid exposing the device to extreme temperatures, direct sunlight, moisture, or excessive fluctuations in temperature, as these conditions may also affect the sensor's functionality. If you have any further questions or concerns about cleaning the sensor or if the issue persists, please contact the customer service department for assistance.
If the EasyMaxx 08165 alcohol tester is not turning on or functioning properly, you can try the following steps to troubleshoot the issue: 1. Check the battery compartment to ensure that the batteries are inserted correctly and have enough power. If the batteries are low or depleted, replace them with fresh batteries of the specified type. 2. Clean the sensor of the device using a dry cloth to remove any dirt or contamination that may be affecting its functionality. Avoid using chemicals or aggressive cleaners, as they may damage the sensor. 3. Make sure that the device is being operated within the specified temperature range. Extreme temperatures can impact the performance of the alcohol tester. Allow the device to acclimate to the appropriate temperature before use. 4. Perform a reset of the device by removing the batteries and leaving them out for a few minutes. Then, reinsert the batteries and try turning on the device again. 5. If the issue persists, contact the customer service department of DS Produkte GmbH, the importer of the EasyMaxx 08165 alcohol tester, for further assistance. Provide them with details about the problem you are experiencing for a more accurate diagnosis and resolution. Remember to always follow the instructions provided in the manual for proper usage and troubleshooting guidelines.
Yes, the manual of the EasyMaxx 08165 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the EasyMaxx and is the answer not in the manual?
Question and answer
Number of questions: 0