View the manual for the Easy Home Petite Dehumidifier MD-818 here, for free. This manual comes under the category not categorized and has been rated by 2 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Easy Home Petite Dehumidifier MD-818 or do you need help? Ask your question here
| Brand | Easy Home |
| Model | Petite Dehumidifier MD-818 |
| Product | not categorized |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Easy Home Petite Dehumidifier MD-818 below.
To determine the capacity of the Easy Home Petite Dehumidifier MD-818, you can refer to the specifications provided in the manual. According to the manual, the dehumidifier has a capacity of approximately 8 oz. (250ml) per day at 86F (30C) and 80% relative humidity (RH). In addition to the capacity, the manual also provides other specifications of the dehumidifier. These include: - Cooling element: Thermo-electric Peltier module - Fan: 80mm x 80mm DC Brushless motor - Power adapter: 9V DC 2.5Amp - Power consumption: 22.5W - Removable water tank: 500ml - Water Level Detector: Automatic switch off with "Yellow" LED Indicator when water tank is full - Drying feature: Warm air outlet on top for drying purposes - Product Dimension: 6.1 (155mm) W x 8.7 (220mm) H x 5.1 In. (130mm) D - Working environment: Over 59F (15C), over 40%RH By referring to these specifications, you can determine the capacity of the Easy Home Petite Dehumidifier MD-818.
If the Easy Home Petite Dehumidifier MD-818 is not cooling properly, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the dehumidifier is properly connected to a power source and that the power adapter is functioning correctly. If necessary, try using a different power outlet or power adapter. 2. Clean the air inlet and outlet: Make sure that the front inlet grill and the top outlet of the dehumidifier are free from any obstructions such as clothing, plastic bags, or papers. Clearing any blockages can improve the airflow and cooling performance. 3. Verify proper positioning: Ensure that the dehumidifier is placed in an area with proper air ventilation. Avoid using it in wet or humid places that may hinder its cooling capabilities. 4. Check for water leakage: Keep the dehumidifier in an upright position to prevent any water leakage. If the unit is not positioned correctly, it may affect its cooling efficiency. 5. Seek professional assistance: If the above steps do not resolve the issue, it is recommended to contact a qualified technician for further inspection and repair. By following these steps, you can troubleshoot the cooling issue with the Easy Home Petite Dehumidifier MD-818.
To clean the fan of the Easy Home Petite Dehumidifier MD-818, follow these steps: 1. Turn off the dehumidifier and unplug it from the power outlet. 2. Use a soft cloth or a brush to clean the surface of the dehumidifier. 3. Pay special attention to the grills of the air inlet and the dry air outlet. 4. Gently wipe off any dust or debris from the grills using the cloth or brush. 5. Make sure to clean both the front inlet grill (air inlet) and the top outlet (dry air outlet). 6. Take care not to apply excessive force or use abrasive materials that could damage the fan or other components. 7. Once you have finished cleaning, plug the dehumidifier back into the power outlet and turn it on. By following these steps, you can effectively clean the fan of the Easy Home Petite Dehumidifier MD-818 and ensure its optimal performance.
If the power adapter of the Easy Home Petite Dehumidifier MD-818 is not working, you can follow these steps to troubleshoot the issue: 1. Check the power source: Ensure that the power outlet you are using is functioning properly. Try plugging in another device to confirm if the outlet is providing power. 2. Inspect the power adapter: Check the power adapter for any visible damage or loose connections. Make sure that all the cables are securely connected. 3. Try a different power outlet: Plug the power adapter into a different power outlet to rule out any issues with the original outlet. 4. Test with another power adapter: If possible, try using a different power adapter that is compatible with the dehumidifier. This will help determine if the issue lies with the power adapter or the dehumidifier itself. 5. Contact customer support: If the power adapter still does not work after trying the above steps, it is recommended to contact the customer support of Easy Home for further assistance. They will be able to provide guidance on troubleshooting or arrange a replacement if necessary. By following these steps, you can troubleshoot the power adapter issue with the Easy Home Petite Dehumidifier MD-818.
To check the water level in the tank of the Easy Home Petite Dehumidifier MD-818, follow these steps: 1. Locate the water tank: The water tank is typically located at the back or side of the dehumidifier. It is a removable container that collects the condensed water. 2. Turn off the dehumidifier: Before checking the water level, make sure to turn off the dehumidifier and unplug it from the power source for safety. 3. Remove the water tank: Gently pull out the water tank from the dehumidifier. It may have a handle or a designated area for easy removal. 4. Check the water level: Look inside the water tank to determine the current water level. There may be markings or indicators on the tank to help you gauge the amount of water collected. 5. Empty or replace the water tank: If the water level is near or at the maximum capacity, carefully empty the water tank into a sink or drain. If needed, clean the tank before placing it back into the dehumidifier. By following these steps, you can easily check the water level in the tank of the Easy Home Petite Dehumidifier MD-818 and take appropriate action to empty or replace the tank as necessary.
To determine the capacity of the Easy Home Petite Dehumidifier MD-818, you can refer to the specifications provided in the manual. According to the manual, the dehumidifier has a capacity of approximately 8 oz. (250ml) per day at 86F (30C) and 80%RH. This means that under these specific conditions, the dehumidifier can remove up to 8 oz. of moisture from the air in a day. It's important to note that the capacity may vary depending on the temperature and humidity levels in your environment. Higher temperatures and humidity levels may result in higher moisture removal rates, while lower temperatures and humidity levels may result in lower rates. To ensure optimal performance, it is recommended to place the dehumidifier in an environment with a temperature above 59F (15C) and a humidity level above 40%RH. Please keep in mind that these capacity specifications are provided as a general guideline and may vary based on individual usage and environmental factors.
If the Easy Home Petite Dehumidifier MD-818 is not cooling properly, you can try the following steps: 1. Check the power supply: Ensure that the dehumidifier is properly connected to a power source and that the power adapter is functioning correctly. Make sure the AC plug is securely inserted into the power outlet. 2. Verify the settings: Confirm that the dehumidifier is set to the desired cooling mode. Check the control panel or buttons to ensure that the unit is not in standby or sleep mode. 3. Clean the air inlet and outlet: Inspect the front air inlet and top air outlet for any obstructions or blockages. Remove any clothing, plastic bags, or papers that may be blocking the airflow. Clean the air vents using a soft brush or cloth. 4. Check for proper ventilation: Ensure that the dehumidifier is placed in an area with adequate air circulation. Avoid positioning it in enclosed spaces or against walls, as this can restrict airflow and affect cooling performance. 5. Contact customer support: If the issue persists after performing the above steps, it is recommended to contact customer support for further assistance. They can provide troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general recommendations and may vary depending on the specific model of the Easy Home Petite Dehumidifier MD-818.
To clean the fan of the Easy Home Petite Dehumidifier MD-818, follow these steps: 1. Turn off the dehumidifier and unplug it from the power outlet. 2. Use a soft cloth or brush to clean the surface of the dehumidifier. 3. Pay special attention to the grills of the air inlet and wipe off any dust or debris. 4. Additionally, clean the dry air outlet on top of the dehumidifier. 5. Gently wipe the area to remove any accumulated dirt or dust. 6. Ensure that the dehumidifier is completely dry before plugging it back in and turning it on. It is important to regularly clean the fan to maintain optimal performance and prevent any blockages that may affect the airflow. By following these steps, you can keep the fan of your Easy Home Petite Dehumidifier MD-818 clean and ensure its efficient operation. Please note that these instructions are based on the information provided in the manual for the Easy Home Petite Dehumidifier MD-818.
If the power adapter of the Easy Home Petite Dehumidifier MD-818 is not working, you can follow these steps to troubleshoot the issue: 1. Check the power source: Ensure that the power outlet you are using is functioning properly. Plug in another device to confirm if the outlet is providing power. 2. Inspect the power adapter: Examine the power adapter for any visible damage or loose connections. Make sure the adapter is securely plugged into the dehumidifier and the power outlet. 3. Try a different power outlet: Plug the power adapter into a different power outlet to rule out any issues with the original outlet. 4. Test with a different power adapter: If possible, try using a different power adapter that is compatible with the dehumidifier. This will help determine if the issue lies with the power adapter or the dehumidifier itself. 5. Contact customer support: If the power adapter still does not work after trying the above steps, it is recommended to contact customer support for further assistance. They can provide guidance on obtaining a replacement power adapter or offer additional troubleshooting steps. Please note that these steps are general recommendations and may vary depending on the specific model of the Easy Home Petite Dehumidifier MD-818.
To check the water level in the tank of the Easy Home Petite Dehumidifier MD-818, you can follow these steps: 1. Locate the water tank: The water tank is typically located at the front or side of the dehumidifier. It is a removable container that collects the condensed moisture. 2. Turn off the dehumidifier: Before checking the water level, make sure to turn off the dehumidifier and unplug it from the power source for safety. 3. Remove the water tank: Gently pull out the water tank from the dehumidifier. It may have a handle or a designated area for easy removal. 4. Check the water level: Look inside the water tank to determine the current water level. Most tanks have a transparent window or markings indicating the maximum and minimum levels. 5. Empty or replace the water tank: If the water level is close to or exceeds the maximum level, it is time to empty the tank. Carefully pour out the collected water or dispose of it according to local regulations. If the dehumidifier has a continuous drainage option, you can connect a hose to drain the water directly. 6. Reinsert the water tank: Once the tank is empty, securely place it back into the dehumidifier. Ensure that it is properly aligned and seated to avoid any leaks. By following these steps, you can easily check the water level in the tank of the Easy Home Petite Dehumidifier MD-818 and take appropriate action to maintain its optimal performance.
To know the specifications of the Easy Home Petite Dehumidifier MD-818, follow these steps: 1. Capacity: The dehumidifier has a capacity of approximately 8 oz. (250ml) per day at 86°F (30°C) and 80% relative humidity (RH). 2. Cooling Element: It is equipped with a thermo-electric Peltier module for efficient cooling. 3. Fan: The dehumidifier features an 80mm x 80mm DC brushless motor fan. 4. Power Adapter: It requires a 9V DC 2.5Amp power adapter for operation. 5. Power Consumption: The dehumidifier consumes 22.5W of power. 6. Removable Water Tank: It has a 500ml water tank that can be easily removed for emptying. 7. Water Level Detector: The dehumidifier is equipped with an automatic switch-off feature and a "Yellow" LED indicator that lights up when the water tank is full. 8. Drying Feature: There is a warm air outlet on the top of the dehumidifier for drying purposes. 9. Product Dimensions: The dehumidifier measures approximately 6.1 inches (155mm) in width, 8.7 inches (220mm) in height, and 5.1 inches (130mm) in depth. 10. Working Environment: The dehumidifier operates effectively in environments with a temperature above 59°F (15°C) and a relative humidity above 40%RH. Please note that these specifications are based on the Easy Home Petite Dehumidifier MD-818 model.
To ensure the safe use of the power supply for the Easy Home Petite Dehumidifier MD-818, follow these instructions: 1. Certification: Use only the provided power adapter that is specifically designed for the dehumidifier. Do not use any other power adapters or modify the power supply. 2. Power Rating: Check the power rating of the dehumidifier and ensure that the power supply meets the required specifications. The Easy Home Petite Dehumidifier MD-818 requires a 9V DC 2.5Amp power adapter. 3. Repair Guidelines: Do not attempt to repair or open the power adapter yourself. If there is any damage or malfunction, contact the manufacturer or authorized service center for assistance. 4. Equipment Disconnect Device: When not in use or during maintenance, disconnect the power adapter from the power outlet and unplug it from the dehumidifier. 5. Correct Orientation: Ensure that the power adapter is inserted into the power outlet with the correct orientation. Do not force it or use excessive pressure. 6. Use Outside the USA: If using the dehumidifier outside the USA, ensure that the power adapter is compatible with the local power supply voltage and frequency. By following these safety instructions, you can safely use the power supply for the Easy Home Petite Dehumidifier MD-818.
Yes, the Easy Home Petite Dehumidifier MD-818 is compliant with Part 15 of the FCC Rules. This compliance ensures that the device operates within certain limits to prevent harmful interference with other electronic devices. Here are the key points regarding FCC compliance: 1. Compliance Statement: The dehumidifier complies with Part 15 of the FCC Rules, which governs the operation of electronic devices. 2. Conditions for Operation: The device is designed to operate without causing harmful interference to other devices. It must also accept any interference received, including interference that may cause undesired operation. 3. Class B Digital Device: The dehumidifier has been tested and found to comply with the limits for a Class B digital device. These limits are in place to provide reasonable protection against harmful interference in residential installations. 4. Radio Frequency Energy: The dehumidifier generates and uses radio frequency energy. If not installed and used according to the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. 5. Correcting Interference: If the dehumidifier causes interference to radio or television reception, the user can try the following measures: reorient or relocate the receiving antenna, increase the separation between the dehumidifier and the receiver, or connect the dehumidifier to a different circuit than the receiver. It is important to note that any changes or modifications not approved by the responsible party for compliance could void the user's authority to operate the equipment.
To troubleshoot if the Easy Home Petite Dehumidifier MD-818 is not working according to the specifications, follow these steps: 1. Check the Power Supply: Ensure that the power adapter is properly connected to the dehumidifier and plugged into a functioning power outlet. Make sure the power adapter is the correct one for the dehumidifier and that it is not damaged. 2. Verify the Power Rating: Confirm that the power adapter's output power matches the rating specified for the dehumidifier. Using an incompatible power adapter can cause the dehumidifier to malfunction. 3. Inspect the Water Tank: Check if the water tank is properly inserted and securely in place. If the tank is not properly positioned, the dehumidifier may not function correctly. 4. Empty the Water Tank: If the "Yellow" LED indicator is lit, it means the water tank is full. Empty the water tank and ensure it is properly reinstalled before operating the dehumidifier. 5. Clean the Air Filter: A clogged or dirty air filter can affect the performance of the dehumidifier. Remove the air filter and clean it according to the instructions in the manual. 6. Ensure Proper Ventilation: Make sure the dehumidifier is placed in a well-ventilated area with sufficient space around it. Blocked airflow can hinder its operation. 7. Check the Working Environment: Ensure that the temperature is above 59°F (15°C) and the relative humidity is above 40%RH, as specified in the manual. Operating the dehumidifier outside these conditions may affect its performance. By following these troubleshooting steps, you can identify and resolve common issues that may cause the Easy Home Petite Dehumidifier MD-818 to not work according to the specifications.
If you are experiencing a power supply issue with the Easy Home Petite Dehumidifier MD-818, follow these steps: 1. Check the Connection: Ensure that the AC/DC power adapter is properly connected to the dehumidifier. Plug the DC power jack of the adapter into the DC Power outlet on the dehumidifier, and then connect the AC plug of the adapter into a suitable wall outlet. 2. Verify the Power Button: Press the "On/Off" button on the dehumidifier to the "On" position. The green LED light should turn on, indicating that the dehumidifier is receiving power and is operational. 3. Ensure Proper Ventilation: Make sure the dehumidifier is positioned in an area with proper air ventilation. Avoid using the power adapter in wet places. 4. Check for Air Blockage: Keep the front inlet grill and the top outlet of the dehumidifier free from any air blocking materials, such as clothing, plastic bags, or papers. 5. Seek Professional Assistance: If you have followed the above steps and there is still no power flowing to the dehumidifier, remove the power adapter and consult a qualified electrician to check the dehumidifier unit. By following these steps, you can troubleshoot and address power supply issues with the Easy Home Petite Dehumidifier MD-818.
Yes, the manual of the Easy Home Petite Dehumidifier MD-818 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Easy Home and is the answer not in the manual?
Question and answer
Number of questions: 4can I get a replacement cord for the easy home petite dehumidifier model md818 ?
How do I clean the water reservoir
Can I get a replacement power cord?
The blue light is flashing and there is no motor sound