Easy Home Motion Lamp manual

Easy Home Motion Lamp
6.5 · 1
PDF manual
 · 2 pages
English
manualEasy Home Motion Lamp

Instructions

On-sale period:07/2017MADE IN CHINA

Motion Lamp

Base with cord Glass Globe*Bulb Cap
Parts List
General Information
Running your Motion Lamp:
1. Please be patient. Normally it will take 2-4 hours for wax to ow.
2. Your Motion Lamp will form “towery” pillar shapes when it starts to
ow. This is normal. Please allow it to run at least 2-4 hours for your
lamp to reach normal operation condition.
Safety Information
1. Do not loosen or remove the bottle cap on globe. Breaking the seal
will ruin your lamp and void your warranty.
2. Do not move, shake or drop your Motion Lamp while warm. The lamp
will become cloudy and the lava will break apart. If this happens, shut
the lamp o immediately and let sit undisturbed for 24 hours. Then,
turn it back on and run as normal. Hopefully your lamp will run again
unharmed. There is a possibility that it will be damaged permanently.
3. We recommend only running your lamp for 8 hours at a time.
(Do not run it 24/7 continuously.)
Assembly – Installation Instructions
1. Tightly screw bulb into base
A
B
C
AFTER SALES SUPPORT
USA
PRODUCT CODE: 53165 07/2017
1-800 685 5053
support@productconcern.com
D
*A metal coil rests inside the bottom of the glass globe of your Motion Lamp.
2. Place glass globe over bulb and put cap on3. Plug your Motion Lamp into a power outlet and place it away from direct sunlight or extreme temperatures; 68°F (20°C) is best4. Switch the Motion Lamp power on (the switch is on the cord)
Cleaning and Maintenance
CAUTION: Always be sure that the Motion Lamp is switched OFF and
unplugged before cleaning or attempting to store. The Motion Lamp will
still be hot right after it is switched o. Please allow it to cool before
handling it.
If it is not owing properly, check the coil:
1. The metal coil should be at the bottom of every Motion Lamp’s glass
globe. It helps to accelerate the heat to melt the lava at a faster pace. If
the coil is not nestled at the bottom of the lamp, it will take longer for
the lava to ow.
2. If the coil is not at the bottom, twirl the globe GENTLY in the base and
the coil will drop.
If your Motion Lamp appears cloudy:
1. If you receive a lamp that is cloudy, allow the Motion Lamp to sit at
room temperature and let the wax settle for approximately 8 hours.
2. Turn the lamp on until the wax starts to soften. Shut it o until it cools.
Then, turn it on again and run for 8 to 10 hours. This may result in a
clear lamp.
Storage
Do not place lamp in direct sunlight. The colors will fade. Do not store
or operate in extreme cold or heat. This will aect the functionality of
your lamp.
Environmental Protection
If the appliance should no longer work at all, please make sure that it is
disposed of in an environmentally friendly way.
Check your local regulations regarding the disposal or recycling of the
lamp and bulb. It is recommended that consumers take advantage of
available local options for recycling rather than disposing of the item in
regular household trash.
R39 30W
120V~60Hz Max. 30W
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.

FOR HOUSEHOLD USE ONLY

View the manual for the Easy Home Motion Lamp here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 6.5. This manual is available in the following languages: English. Do you have a question about the Easy Home Motion Lamp or do you need help? Ask your question here

Need help?

Do you have a question about the Easy Home and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
W
William lockwitzJanuary 6, 2020

I need a replacement light bulb

General
BrandEasy Home
ModelMotion Lamp
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Easy Home Motion Lamp below.

Is the manual of the Easy Home Motion Lamp available in English?

Yes, the manual of the Easy Home Motion Lamp is available in English .

Is your question not listed? Ask your question here

No results