View the manual for the Easy Home GT-SlC-04-US here, for free. This manual comes under the category irons and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Easy Home GT-SlC-04-US or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Easy Home GT-SlC-04-US below.
A high wattage iron heats up faster.
Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.
Yes, irons are in principle only suitable for tap water.
To ensure that the Easy Home GT-SlC-04-US iron is securely locked in on the base station, follow these steps: 1. Place the base station on a sturdy, level, and vibration-free surface. 2. Position the iron on the base station and listen for a "CLICK" sound, indicating that the iron is locked in. 3. If needed, adjust the iron on the base station until the handle points towards the power cable. 4. Always unwind the power cable completely before use and wind it up only when the iron is completely cooled off. 5. Avoid cleaning the iron with metal sponges or abrasive detergents to prevent damage to the soleplate. 6. Observe the care symbols on textiles to be ironed and use the iron only for suitable textiles. 7. Ensure that the surface where the stand is placed is sturdy to prevent any accidents.
To ensure the Easy Home GT-SlC-04-US iron heats up properly when placed on the base station, follow these steps: 1. Place the base station on a sturdy, level, and vibration-free surface. 2. Position the iron on the base station until you hear a "CLICK" indicating it is locked in place. 3. Unwind the power cable completely before use and only wind it up when the iron is cooled off. 4. Set the temperature control knob to the required temperature and wait for the indicator lamp to light up, signaling the sole plate is heated. 5. If the iron does not heat up properly, check for any damage to the iron or its parts. Do not use a damaged iron; contact the manufacturer instead. 6. Avoid using metal sponges or abrasive detergents to clean the iron, as they can damage the sole plate.
Yes, the manual of the Easy Home GT-SlC-04-US is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Easy Home and is the answer not in the manual?
Question and answer
Number of questions: 0