View the manual for the Easy Home GT-FSI-07-UK here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Easy Home GT-FSI-07-UK or do you need help? Ask your question here
The Easy Home GT-FSI-07-UK is a smart home system designed to improve convenience and efficiency in your living space. It allows you to control various aspects of your home, such as lighting, temperature, and security, through a user-friendly app on your smartphone or tablet. With its easy installation process, you can quickly set up and connect all your devices to the system without the need for professional assistance. This smart home system is compatible with a wide range of smart devices, making it versatile and adaptable to your specific needs. It also offers voice control capabilities, allowing you to easily operate your home automation system using voice commands. The Easy Home GT-FSI-07-UK is designed with quality and usability in mind, ensuring reliable performance and long-lasting durability. Its sleek and modern design seamlessly blends into your home decor, providing a seamless and integrated smart home experience. Upgrade your lifestyle with the Easy Home GT-FSI-07-UK and enjoy the convenience and comfort of a truly connected home.
| Brand | Easy Home |
| Model | GT-FSI-07-UK |
| Product | smart home |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Easy Home GT-FSI-07-UK below.
To set up and connect the Easy Home GT-FSI-07-UK smart home, follow these steps: 1. Select a suitable location for the remote controlled wall sockets. Ensure that they are used only in indoor areas and not in wet rooms or in the rain. 2. Connect one of the remote controlled wall sockets to a properly installed socket. The indicator light on the socket will start blinking for 30 seconds, indicating that it is in learning mode. 3. Press any button on the remote control. The indicator light on the remote control will also start blinking. 4. To assign a channel to the remote controlled wall socket, press the On button for the desired channel on the remote control during the learning mode. 5. The indicator light on the remote controlled wall socket will illuminate continuously, indicating that it is now connected to the remote control. 6. If you are unable to assign a channel during the learning mode, repeat steps 1-3. 7. To switch off the remote controlled wall socket, press the Off button for the respective channel on the remote control. Please note that these steps are based on the Easy Home GT-FSI-07-UK smart home manual and may vary slightly depending on the specific model and version.
If the Easy Home GT-FSI-07-UK smart home is not responding to your commands, you can try the following troubleshooting steps: 1. Ensure that the range of the wireless signals between the remote control and the remote controlled wall socket is not exceeded. Reduce the distance between them if necessary. 2. Check the battery of the remote control and replace it with a new one if it is empty. 3. Verify if the signal transmission is disrupted or if the assignment of the channels was deleted. Refer to the manual's chapter on "Additional notes" for instructions on how to resolve this issue. 4. Make sure that another remote controlled wall socket has not inadvertently responded to the command from the remote control. Check the assignment of the channels and correct any incorrect assignments. 5. If one of the remote controlled wall sockets automatically switches off, it may be due to incorrect assignment. Reassign the channels to the remote controlled wall sockets according to the instructions in the manual's chapter on "Assigning channels". Please note that these troubleshooting steps are based on the Easy Home GT-FSI-07-UK smart home manual and may vary depending on the specific situation.
To replace parts of the Easy Home GT-FSI-07-UK smart home, follow these steps: 1. Before replacing any parts, ensure that the remote controlled wall sockets or individual parts are not damaged. If you notice any cracks, breaks, or deformities, do not use the remote controlled wall sockets and contact the manufacturer for replacement parts. 2. Carefully open the packaging of the remote controlled wall sockets, taking caution not to damage them with a sharp knife or pointed object. 3. Check the contents of the package to ensure that all the necessary parts are included. 4. To replace the batteries in the remote control, push the battery compartment cover in the direction indicated by the arrow to open it. Clean the contacts of the battery and the battery compartment if necessary. Insert the enclosed battery or a battery of the same type (A23/12 V) with the correct polarity. Slide the battery compartment cover back into place. 5. If you need to replace any other specific parts of the Easy Home GT-FSI-07-UK smart home, refer to the manual for detailed instructions on how to do so. Please note that these steps are based on the Easy Home GT-FSI-07-UK smart home manual and may vary depending on the specific part that needs to be replaced.
If the Easy Home GT-FSI-07-UK smart home is not functioning properly, you can try the following troubleshooting steps: 1. Check the range of the wireless signals between the remote control and the remote controlled wall socket. Ensure that the distance between them does not exceed the maximum range of 40 meters. If it does, reduce the distance between them. 2. Verify if the battery of the remote control is empty. Replace the battery with a new one of the same type if necessary. 3. If the signal transmission is disrupted or the assignment of the channels was deleted, refer to the manual's chapter on "Additional notes" for instructions on how to resolve this issue. 4. Make sure that another remote controlled wall socket has not inadvertently responded to the command from the remote control. Check the assignment of the channels and correct any incorrect assignments. 5. If one of the remote controlled wall sockets automatically switches off, it may be due to incorrect assignment. Reassign the channels to the remote controlled wall sockets according to the instructions in the manual's chapter on "Assigning channels". Please note that these troubleshooting steps are based on the Easy Home GT-FSI-07-UK smart home manual and may vary depending on the specific issue you are experiencing.
To access and navigate the settings menu of the Easy Home GT-FSI-07-UK smart home, follow these steps: 1. On the remote control, locate the On and Off buttons for each channel (1, 2, 3, 4) and the On and Off buttons for all channels. 2. Press and hold the On button for all channels to access the settings menu. 3. Use the On and Off buttons for each channel to navigate through the settings options. 4. Press the Off button for the desired channel to select a specific setting. 5. Use the On and Off buttons for all channels to confirm or save the selected setting. 6. To exit the settings menu, press and hold the Off button for all channels. Please note that these steps are based on the Easy Home GT-FSI-07-UK smart home manual and may vary depending on the specific version or model of the device.
Yes, the manual of the Easy Home GT-FSI-07-UK is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Easy Home and is the answer not in the manual?
Question and answer
Number of questions: 3Dețin 3 prize dar telecomanda a fost distrusă.Va rog să mă ajutați cu un sfat.De unde pot comanda o telecomandă.Vă mulțumesc!
Is there a battery in the wall socket of GT fsi-07-uk
Unde pot comanda o telecomandă?