Easy Home Carpet Cleaner VC9389A manual

Easy Home Carpet Cleaner VC9389A
7.9 · 3
PDF manual
 · 32 pages
English
manualEasy Home Carpet Cleaner VC9389A
General information
7

General information

Reading and storing the user manual

This user manual accompanies this carpet cleaner and contains
important information on setup and use.
Before using the carpet cleaner, read the user manual carefully.
This particularly applies to the safety instructions. Failure to do so
may result in personal injury or damage to the carpet cleaner.
Store the user manual for further use. Make sure to include this user manual
when passing the carpet cleaner on to third parties.

Explanation of symbols

The following symbols and signal words are used in this user manual, on the
carpet cleaner or on the packaging.

WARNING!

This signal symbol/word designates a hazard
with moderate risk, which may result in death
or severe injury if not avoided.

CAUTION!

This signal symbol/word designates a hazard
with low risk, which may result in minor or
moderate injury if not avoided.

NOTICE!

This signal symbol/word warns of possible
damage to property.
This symbol provides you with useful additional information on
handling and use.
This appliance is provided with double insulation. Use only
identical replacement parts (see chapter "Servicing of double-
insulated appliances").
3015318
The ETL Listed Mark is proof that the product has been
independently tested and meets the applicable published
standard.

View the manual for the Easy Home Carpet Cleaner VC9389A here, for free. This manual comes under the category not categorized and has been rated by 3 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Easy Home Carpet Cleaner VC9389A or do you need help? Ask your question here

Need help?

Do you have a question about the Easy Home and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 44
R
Renika NormentMay 5, 2024

Looking to replace the clean water tank and the dirty water tank can’t find the part numbers to order them

Looking to replace the clean water tank and the dirty water tank can’t find the part numbers to order them
zoom-in
View photo
1 comment
E
Emma of manua.lsMay 18, 2024

To replace the clean water tank and the dirty water tank on the Easy Home Carpet Cleaner VC9389A, follow these steps: 1. Remove the dirty water tank and pull out the motor filter to rinse it with warm water. 2. Allow the filter to dry thoroughly before storing the carpet cleaner. 3. Replace the filter and put the dirty water tank back into the carpet cleaner as described in the manual section "Emptying the dirty water tank."

This answer is automatically generated
D
DoloresJanuary 14, 2023

I am in need of a cap for my carpet cleaner. How do I go about ordering one?

I am in need of a cap for my carpet cleaner. How do I go about ordering one?
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 18, 2023

To order a cap for your Easy Home Carpet Cleaner VC9389A, please follow these steps: 1. Unplug the carpet cleaner. 2. Unlock the dirty water tank by pressing the dirty water tank locking latch and lifting up the dirty water tank handle. 3. Remove the dirty water tank from the carpet cleaner. 4. Open the dirty water tank cap by turning it counterclockwise, so the grip points to the word "unlock". 5. Empty the dirty water tank and replace the dirty water tank cap, turning it to the "lock" position. 6. Place the dirty water tank back into the carpet cleaner. 7. Push the dirty water tank handle down until the dirty water tank locking latch clicks into place.

This answer is automatically generated
L
Lisa McCauleyAugust 20, 2023

How do I get replacement parts for the Easy Home carpet cleaner? Specifically I need the water solution tank and cap replacement.

How do I  get replacement parts for the Easy Home carpet cleaner?  Specifically I need the water solution tank and cap replac...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 18, 2023

To obtain replacement parts for the Easy Home carpet cleaner VC9389A, follow these steps: 1. Identify the specific parts you need, in this case, the water solution tank and cap. 2. Contact the manufacturer or authorized retailers of Easy Home products to inquire about the availability of the replacement parts. 3. Provide them with the model number (VC9389A) and specify that you need the water solution tank and cap. 4. Follow their instructions for purchasing the replacement parts, which may include ordering online, visiting a store, or contacting customer service. 5. Complete the necessary payment and shipping details to finalize the purchase. 6. Once you receive the replacement parts, install them onto the carpet cleaner.

This answer is automatically generated
W
Wayne HooperMay 19, 2024

How do I get a new clean water cap for a Easy Hume carpet cleaner clean water tank product code 803414

W
Willa JoeApril 5, 2021

How do I order a replacement part for the easy home carpet cleaner. I need to replace the cap on the dirty water tank,

1 comment
A
Annette MaloneSeptember 19, 2021

Need to replace cap on solution tank

M
Maree April 8, 2023

Hi I have a easy home carpet cleaning and I was just wondering what shampoo to use to get strain out of carpet as well please

L
LarraineNovember 26, 2023

I am very happy with the cleaner and have had it for many years. BUT how do I clean the tank properly please.

P
Patty KuhnerNovember 27, 2023

I fill up my carpet cleaner to the line and it looks like there’s no leakage. Nothing. I put it in place in the machine and before I get over to the rug it is leaked out all over the floor. Why is this happening?

W
Wayne RoofFebruary 14, 2024

I need a replacement part / clean tank assembly for a easy home carpet shampooer model # vcc9385s how can i order one?

P
Patricia AdenFebruary 18, 2024

How do I fill the easy home rug shampoo where does the shampoo go and where does the water go?

The Easy Home Carpet Cleaner VC9389A is a device designed for cleaning carpets, upholstery or rugs. It is a compact, lightweight cleaner that can easily be transported from room to room. The cleaner features different attachments that can be used for tackling different types of surfaces. These attachments include a crevice tool, dusting brush, and upholstery tool. The device works by using a combination of suction and brushes to deep clean carpets and upholstery. The Easy Home Carpet Cleaner VC9389A has a large capacity tank, which holds an ample amount of water and cleaning solution. This feature minimizes the number of refills needed during the cleaning process. The device also has an automatic shut-off feature that prevents the cleaner from overheating and damaging the motor. Customers can have peace of mind knowing that their investment will last for years due to the device's durable construction. Additionally, the Easy Home Carpet Cleaner VC9389A features a long power cord that provides a large cleaning radius without needing to switch power outlets. The device is easy to assemble and disassemble for maintenance and cleaning purposes. While the Easy Home Carpet Cleaner VC9389A is not categorized, it remains a reliable and effective tool for anyone looking to keep their carpets and upholstery looking their best.

General
BrandEasy Home
ModelCarpet Cleaner VC9389A
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Easy Home Carpet Cleaner VC9389A below.

How do I turn on the Easy Home Carpet Cleaner VC9389A?

To turn on the Easy Home Carpet Cleaner VC9389A, simply locate the power switch located on the machine and flip it to the "on" position.

What is the maximum capacity of the water tank in the Easy Home Carpet Cleaner VC9389A?

The Easy Home Carpet Cleaner VC9389A has a water tank with a maximum capacity of X liters, allowing you to clean more areas before needing to refill.

How do I attach the cleaning nozzle to the Easy Home Carpet Cleaner VC9389A?

To attach the cleaning nozzle, locate the nozzle attachment point on the machine and align the nozzle with the slot. Firmly push the nozzle in until you hear a click, indicating that it is securely attached.

How do I adjust the cleaning intensity on the Easy Home Carpet Cleaner VC9389A?

The Easy Home Carpet Cleaner VC9389A has adjustable cleaning intensity settings. Look for the intensity control dial, usually located near the handle or on the control panel. Rotate the dial to increase or decrease the cleaning intensity according to your preference.

What maintenance steps should I take after using the Easy Home Carpet Cleaner VC9389A?

After using the Easy Home Carpet Cleaner VC9389A, it is important to properly clean and maintain the machine to ensure its longevity. This includes emptying and rinsing the water tank, removing and cleaning the nozzle and brush attachments, and storing the device in a dry and secure location. Regularly check the filter and clean or replace it as needed to maintain optimal performance.

Is the manual of the Easy Home Carpet Cleaner VC9389A available in English?

Yes, the manual of the Easy Home Carpet Cleaner VC9389A is available in English .

Is your question not listed? Ask your question here

No results