View the manual for the E-flite Conscendo Evolution here, for free. This manual comes under the category radio controlled toys and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the E-flite Conscendo Evolution or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the E-flite Conscendo Evolution.
The E-flite Conscendo Evolution is a radio controlled toy in the form of an airplane. It measures 1006 millimeters in length and has a wingspan of 1499 millimeters. Powered by a brushless motor, it offers enhanced performance and efficiency. Equipped with an electronic speed control (ESC), specifically of the brushless type, it provides precise control over the speed of the aircraft. Additionally, it features four servos to ensure smooth and accurate maneuvering. Notably, the E-flite Conscendo Evolution does not come with a receiver included, requiring one to be separately acquired. It is recommended to be used with a 3S 11.1V 1300–2200mAh or 4S 14.8V 1000–2200mAh LiPo battery, however, these batteries are not included with the product. As such, batteries are necessary for operation, while a charger is not included. For ease of use and assembly, a manual is provided to guide users through the setup and operation of the toy aircraft. The E-flite Conscendo Evolution is suitable for both boys and girls and falls under the category of airplane toys. In summary, the E-flite Conscendo Evolution is a large-scale radio controlled toy airplane designed for efficient performance. Its brushless motor and electronic speed control system contribute to its smooth flying experience, while the inclusion of four servos ensures precision during maneuvering. Although batteries and a receiver are not included, an instruction manual is provided to assist users in setting up and operating the toy.
| Brand | E-flite |
| Model | Conscendo Evolution | EFL01675 |
| Product | radio controlled toy |
| EAN | 0605482690727 |
| Language | English |
| Filetype | User manual (PDF) |
| Length | 1006 mm |
| Wingspan | 1499 mm |
| Motor type | Brushless |
| Electronic speed control (ESC) | Yes |
| Electronic speed control (ESC) type | Brushless |
| Number of servos | 4 |
| Suggested gender | Boy/Girl |
| Product type | Airplane |
| Replica | No |
| Construction type | Plug-N-Play(PNP) |
| Engine type | Electric engine |
| Suitable for outdoor use | Yes |
| Receiver included | No |
| Batteries included | No |
| Charger | No |
| Manual | Yes |
| Recommended battery | 3S 11.1V 1300–2200mAh / 4S 14.8V 1000–2200mAh LiPo |
| Batteries required | Yes |
| Product color | Multicolour, White |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the E-flite Conscendo Evolution below.
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
Yes, the wingspan of the E-flite Conscendo Evolution is indeed 1499 mm. This provides the user with a decent wingspan, allowing for stability and precise control during flight.
Yes, the E-flite Conscendo Evolution is equipped with a brushless motor. This means that the toy will have a higher power-to-weight ratio, providing better performance and efficiency compared to toys with brushed motors.
Yes, the E-flite Conscendo Evolution does have an electronic speed control (ESC). This feature allows for better throttle control and smooth acceleration during flight.
Yes, the E-flite Conscendo Evolution comes with 4 servos. These servos play a crucial role in controlling the various moving parts of the toy, ensuring accurate and responsive maneuverability.
No, a receiver is not included with the E-flite Conscendo Evolution. This means that the user will need to purchase a compatible receiver separately in order to control the toy using a radio transmitter. However, this allows for more customization options, as the user can choose a receiver that suits their specific preferences and needs.
To troubleshoot and repair control surface issues on the E-flite Conscendo Evolution, follow these steps: 1. Control surface does not move: - Check for control surface, control horn, linkage, or servo damage. - Replace or repair any damaged parts and adjust the controls. - Do a check of wires and connections, and connect or replace as needed. - Re-bind the transmitter or select the correct airplane in the transmitter. 2. Motor power pulses then motor loses power: - Recharge the flight battery or replace it if it is no longer performing. - Postpone the flight if the weather conditions are too cold. - Replace the battery if it is old, worn out, or damaged. - Use a recommended battery with an appropriate C rating. 3. Controls reversed: - Perform the Control Direction Test and adjust the controls on the transmitter appropriately. 4. Oscillation: - Replace the propeller assembly if it is damaged. - Replace parts or correctly align all parts and tighten fasteners to reduce motor vibration. - Align and secure the receiver in the fuselage. - Tighten or otherwise secure parts such as servo, arm, linkage, horn, and control surface. 5. Inconsistent flight performance: - Adjust the clevis to remove trim if you have adjusted trim more than 8 clicks. - Ensure that sub-trim is at neutral by adjusting the servo linkage. - Disconnect and reconnect the battery, keeping the aircraft still for 5 seconds after battery connection. These steps should help you troubleshoot and repair control surface issues on the E-flite Conscendo Evolution.
To ensure proper battery and power management for the E-flite Conscendo Evolution, follow these best practices: 1. Battery Selection: - We recommend using the Spektrum 2200mAh 14.8V 4S 30C Li-Po battery. - If using a different battery, ensure it is at least a 1200mAh 3S or 4S battery. - Verify the center of gravity with your selected battery before flying. 2. Battery Installation: - Lower the throttle and throttle trim to the lowest settings. - Power on the transmitter and wait for 5 seconds. - Push the button on top of the fuselage to remove the battery hatch. - Install the battery all the way to the front of the battery compartment. - Secure the flight battery using the hook and loop strap. - Connect the battery to the ESC and keep the aircraft immobile on the ground for 5 seconds. - Reinstall the battery hatch securely. 3. Battery Safety: - Always disconnect the Li-Po flight battery from the aircraft receiver when not flying to avoid over-discharging. - Avoid trickle discharge by disconnecting and removing the Li-Po battery after use. - Charge the Li-Po battery to about half capacity before storage. - Monitor the battery voltage using a Li-Po cell voltage checker. 4. Repairs: - Use any adhesive suitable for EPO foam material to repair foam parts. - Refer to the Replacement Parts List for ordering replacement parts if necessary. 5. Dual Rates and Control Throws: - Program your transmitter to set the rates and control throws as specified in the manual. - Adjust the values for desired control response after flying if needed. By following these best practices, you can ensure optimal battery performance and safe power management for the E-flite Conscendo Evolution.
The recommended replacement parts for the E-flite Conscendo Evolution are as follows: 1. Fuselage: Conscendo Evolution (Part # EFL01651) 2. Wing Set: Conscendo Evolution (Part # EFL01652) 3. Horizontal Stabilizer: Conscendo Evolution (Part # EFL01653) 4. Hatch: Conscendo Evolution (Part # EFL01654) 5. Pushrod Set: Conscendo Evolution (Part # EFL01655) 6. Decal Sheet: Conscendo Evolution (Part # EFL01656) 7. Wing Tube: Conscendo Evolution (Part # EFL01657) 8. Prop, Spinner: Conscendo Evolution (Part # EFL01658) 9. Cowl, Motor Mount: Conscendo Evolution (Part # EFL01659) 10. Spektrum Smart 30A Smart ESC (Part # SPMXAE1030) 11. AR637T 6CH SAFE and AS3X TelemRX (Part # SPMAR637T) 12. Brushless Motor: 3226-970kV (Part # SPMAX1200) 13. 9g Mini Servo: 400mm Lead (Part # SPMSA381) 14. Servo Arms, Gears SA381 Servo (Part # SPMSA3811) 15. Smart 1300mAh 3S 11.1V Smart 30C LiPo Battery, IC3 (Part # SPMX13003S30M) 16. Smart 2200mAh 4S 14.8V Smart 30C LiPo Battery, IC3 (Part # SPMX22004S30) 17. Smart 2200mAh 3S 11.1V Smart 30C LiPo Battery, IC3 (Part # SPMX22003S30) 18. Smart S1200 DC Charger, 1x200W (Part # SPMXC1000) 19. Smart S1200 AC Charger, 2x100W (Part # SPMXC1010) 20. Smart S120 USB-C Charger, 1x20W (Part # SPMXC1020) 21. Smart S150 AC/DC Charger, 1x50W (Part # SPMXC1070) 22. Smart S1500 DC Charger, 1x500W (Part # SPMXC1050) 23. Smart Battery Checker and Servo Driver (Part # SPMXBC100) 24. DX8e 8CH Transmitter Only (Part # SPMR8100) 25. AR637T 6 Channel AS3X Receiver (Part # SPMAR637T) 26. iX12 12 Channel Transmitter Only 27. iX20 20 Channel Transmitter Only 28. DX9 Black Transmitter Only MD2 These replacement parts are recommended for maintaining and repairing the E-flite Conscendo Evolution.
When using the E-flite Conscendo Evolution, it is important to follow these safety precautions and warnings: 1. Pre-flight Check: - Inspect the aircraft for any visible damage or loose parts before each flight. - Ensure the control surfaces move freely and are properly connected. - Verify that the battery is securely installed and fully charged. 2. Flying Environment: - Fly in open areas away from people, buildings, and obstacles. - Avoid flying near power lines, trees, or other potential hazards. - Check local regulations and obtain necessary permissions before flying in public spaces. 3. Transmitter Safety: - Keep the transmitter antenna fully extended during flight. - Ensure the transmitter is in good working condition and batteries are fully charged. - Avoid pointing the transmitter antenna towards yourself or others. 4. Battery Safety: - Use only recommended batteries and chargers. - Follow proper charging procedures and never leave batteries unattended while charging. - Store and transport batteries in a fireproof container. 5. Flight Safety: - Maintain visual contact with the aircraft at all times during flight. - Avoid flying in adverse weather conditions such as strong winds or rain. - Be aware of other aircraft in the vicinity and yield right of way if necessary. By adhering to these safety precautions and warnings, you can ensure a safe and enjoyable experience when using the E-flite Conscendo Evolution.
To identify and avoid counterfeit products when purchasing the E-flite Conscendo Evolution, follow these guidelines: 1. Purchase from Authorized Dealers: - Only buy from Horizon Hobby, LLC or authorized dealers to ensure authentic, high-quality Spektrum products. - Be cautious of purchasing from unauthorized sellers or third-party websites. 2. Verify Authenticity: - Check for the official E-flite branding and packaging. - Look for the Spektrum logo and branding on the product and packaging. - Verify the product's authenticity by comparing it to official product images and descriptions on the Horizon Hobby website. 3. Beware of Compatibility Claims: - Be skeptical of products claiming compatibility with DSM or Spektrum technology if they are not from authorized sources. - Counterfeit products may not perform as expected or be compatible with genuine Spektrum systems. 4. Seek Support and Warranty: - Horizon Hobby, LLC disclaims all support and warranty for counterfeit products or products claiming compatibility with DSM or Spektrum technology. - Ensure that you can receive proper support and warranty coverage by purchasing from authorized sources. By following these guidelines, you can minimize the risk of purchasing counterfeit products and ensure that you are getting genuine E-flite Conscendo Evolution equipment.
The control surface of the E-flite Conscendo Evolution may not be moving properly due to several possible causes. Here are the steps to troubleshoot and address this issue: 1. Check for control surface, control horn, linkage, or servo damage. If any of these components are damaged, replace or repair them as necessary. Also, ensure that the controls are properly adjusted. 2. Inspect the wires and connections. If there is any damage or loose connections, perform a thorough check and either connect or replace them as needed. 3. Verify that the transmitter is correctly bound to the airplane and the correct airplane model is selected. If not, re-bind the transmitter or select the appropriate airplane model in the transmitter settings. If the control surface still does not move properly after performing the above steps, refer to the receiver manual for further information and troubleshooting guidance. Please note that these steps are general troubleshooting guidelines and may vary depending on the specific situation. It is always recommended to refer to the complete manual for detailed instructions and safety guidelines.
To bind the transmitter to the E-flite Conscendo Evolution and select the correct airplane model, follow these steps: 1. Remove and inspect the contents of the package. 2. Read the instruction manual thoroughly. 3. Charge the flight battery. 4. Set up the transmitter using the transmitter setup chart provided in the manual. 5. Fully assemble the aircraft. 6. Install the fully charged flight battery in the aircraft. 7. Check the Center of Gravity (CG) to ensure proper balance. 8. Bind the aircraft to your transmitter using either the bind button on the receiver case or the conventional bind plug. 9. Make sure all linkages move freely. 10. Perform the control direction test with the transmitter to ensure the control surfaces respond correctly. 11. Perform the AS3X reaction test with the aircraft to verify stability. 12. Adjust the flight controls and transmitter settings as needed. 13. Perform a radio system range test to ensure proper signal reception. 14. Find a safe open area to fly the aircraft. 15. Plan your flight according to the field conditions. Following these steps will help you bind the transmitter to the E-flite Conscendo Evolution and select the correct airplane model for a successful flight.
If the flight battery of the E-flite Conscendo Evolution is not holding a charge, you can take the following steps to address the issue: 1. Disconnect and remove the Li-Po battery from the aircraft after use to prevent trickle discharge. 2. Charge your Li-Po battery to about half capacity before storage. 3. During storage, make sure the battery charge does not fall below 3V per cell. 4. Monitor your aircraft battery's voltage before and after flying using a Li-Po cell voltage checker. 5. If the ESC sounds a continuous double beep after connecting the flight battery, recharge or replace the battery. 6. Always disconnect the Li-Po flight battery from the aircraft receiver when not flying to avoid over-discharging the battery. 7. Be sure to select the appropriate battery for your aircraft, such as the recommended Spektrum 2200mAh 14.8V 4S 30C Li-Po. 8. Verify that the center of gravity (CG) is correct with your selected battery before flying. 9. Adjust the battery position as needed to achieve the correct CG for safe and stable flight. By following these steps, you can address the issue of the flight battery not holding a charge for the E-flite Conscendo Evolution.
The motor of the E-flite Conscendo Evolution may pulse or lose power due to several possible causes. Here are the steps to troubleshoot and address this issue: 1. Check for damaged propeller or spinner. If either of these components is damaged, replace the propeller assembly. 2. Inspect the motor for vibration. If there is excessive vibration, replace any damaged parts and ensure that all parts are correctly aligned and tightened. 3. Verify that the receiver is securely aligned and fastened in the fuselage. Loose receiver connections can cause motor issues. 4. Check for loose aircraft controls. Tighten or otherwise secure parts such as the servo, arm, linkage, horn, and control surface. 5. Replace any worn parts, especially the propeller, spinner, or servo, as they can affect motor performance. 6. If the motor power pulses and loses power, it may be due to the default soft Low Voltage Cutoff (LVC) of the ESC. Recharge the flight battery fully or replace it if it is no longer performing. 7. Consider weather conditions. If it is too cold, postpone the flight until the weather is warmer, as cold weather can affect motor performance. 8. If the battery is old, worn out, or damaged, replace it with a new one. Please note that these steps are general troubleshooting guidelines and may vary depending on the specific situation. It is always recommended to refer to the complete manual for detailed instructions and safety guidelines.
The recommended replacement parts for the E-flite Conscendo Evolution, as mentioned in the manual, are as follows: 1. Fuselage: Conscendo Evolution (Part # EFL01651) 2. Wing Set: Conscendo Evolution (Part # EFL01652) 3. Horizontal Stabilizer: Conscendo Evolution (Part # EFL01653) 4. Hatch: Conscendo Evolution (Part # EFL01654) 5. Pushrod Set: Conscendo Evolution (Part # EFL01655) 6. Decal Sheet: Conscendo Evolution (Part # EFL01656) 7. Wing Tube: Conscendo Evolution (Part # EFL01657) 8. Propeller and Spinner: Conscendo Evolution (Part # EFL01658) 9. Cowl and Motor Mount: Conscendo Evolution (Part # EFL01659) 10. Smart 30A Smart ESC (Part # SPMXAE1030) 11. AR637T 6CH SAFE and AS3X Telemetry Receiver (Part # SPMAR637T) 12. Brushless Motor: 3226-970kV (Part # SPMAX1200) 13. 9g Mini Servo: 400mm Lead (Part # SPMSA381) 14. LiPo Batteries: Various options available, such as Smart 1300mAh 3S 11.1V, Smart 2200mAh 4S 14.8V, and Smart 2200mAh 3S 11.1V (Part # SPMXC1000, SPMXC1010, SPMXC1020, SPMXC1070, SPMXC1050) 15. Smart Battery Checker and Servo Driver (Part # SPMXBC100) 16. Transmitters: DX8e, iX12, iX20, DX9 Black (Part # SPMR8100, iX12, iX20, DX9 Black) These replacement parts are recommended for maintaining and repairing the E-flite Conscendo Evolution.
Yes, the manual of the E-flite Conscendo Evolution is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the E-flite and is the answer not in the manual?
Question and answer
Number of questions: 1my new Econscendo evolution 1.5 m came with the wrong y connector for the ailerons and the rudder and elevator servos are not connected to receiver and are too short to reach. Can't get to receiver without damaging body because cover plate is glued to hull. Has anyone recently encountered this issue? Looks like it was not properly installed when made in China?