Dri Eaz Sahara Pro X4 TurboDryer manual

Dri Eaz Sahara Pro X4 TurboDryer
8 · 1
PDF manual
 · 6 pages
English
manualDri Eaz Sahara Pro X4 TurboDryer
124082D 1 Legend Brands, Inc.

Owner’s Manual

Sahara Pro X4 TurboDryer

®

Airmover

LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: +1 800-932-3030 LegendBrandsRestoration.com
The Sahara produces high velocity airflow for ventilation and
to accelerate the evaporation of moisture from structural and other materials.
Patents: LBpatents.com

READ AND UNDERSTAND BEFORE OPERATING

WARNING! To reduce the risk of fire or
electric shock, do not use this fan with any
solid-state speed control device.
WARNING! Unit must be grounded. Do not
use with an extension cord. Connect only to an outlet provided
with a ground fault interrupting device.
WARNING! Never operate a unit with a damaged power cord, as
this may lead to electrical or fire hazards. If power cord is
damaged, it must be replaced by an approved Legend Brands,
Inc., power cord.
WARNING! Do not touch grills when unit is operating.
WARNING! Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not attended.
WARNING! Always operate the unit on a stable, level surface so
it cannot fall and cause injury.
WARNING! Do not operate any fan with a damaged cord or plug.
Return to an authorized service facility for assessment and/or
repair.
WARNING! Do not route cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not place cord
under furniture or appliances. Arrange cord away from traffic area
to avoid creating a trip hazard.
NOTICE: Keep motor and electrical components dry. For indoor
use only.
NOTICE: Unplug when not in use or when moving unit.
NOTICE: Do not alter or modify your airmover in any way. Use
only replacement parts authorized by Legend Brands, Inc.
Modifications or use of unapproved parts could create a hazard
and will void your warranty.
BEFORE YOU BEGIN
Warranty registration
Please visit warranty.LegendBrands.com to register your product.
Registration allows Legend Brands to better assist you with the
operation and maintenance of your equipment, and to contact you
in case there is important safety information concerning your
Legend Brands product. If you wish to make a warranty claim,
have your equipment model, serial number and original proof of
purchase available and call your distributor from which you
purchased the unit (or the Legend Brands Service Department at
800-932-3030) for assistance with obtaining a return material
authorization (RMA).
OPERATING INSTRUCTIONS
1. Ensure control knob in the off position. Unwrap the cord and
plug the unit into a standard 115V GFCI-protected outlet.
2. Direct the Sahara air outlet where desired. Unit may be
operated in 4 positions (0°, 10°, 45° or 90°) for drying floors,
walls, stairways or ceilings.
3. Set the control knob to the desired speed.
4. Carpet Clamp: To "float" a carpet, use the Carpet Clamp
(Fig. A) to secure the edge of the carpet over the top of the
snout to direct airflow underneath the carpet.
Fig. A: Parts Identification
Air outlet grill. Keep clear
of obstructions.
Speed control
Air inlet grill. Keep
clear of obstructions.
Carpet clamp.
Convenience outlet
Cord wrap. Secure
cord with plug clip.
Carry handle
Circuit breaker reset switch
clear of obstructions.

Manual

View the manual for the Dri Eaz Sahara Pro X4 TurboDryer here, for free. This manual comes under the category heaters and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Dri Eaz Sahara Pro X4 TurboDryer or do you need help? Ask your question here

Need help?

Do you have a question about the Dri Eaz and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Dri Eaz Sahara Pro X4 TurboDryer specifications

Below you will find the product specifications and the manual specifications of the Dri Eaz Sahara Pro X4 TurboDryer.

General
BrandDri Eaz
ModelSahara Pro X4 TurboDryer
Productheater
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Dri Eaz Sahara Pro X4 TurboDryer below.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

Is the manual of the Dri Eaz Sahara Pro X4 TurboDryer available in English?

Yes, the manual of the Dri Eaz Sahara Pro X4 TurboDryer is available in English .

Is your question not listed? Ask your question here

No results