View the manual for the Domo DO523S here, for free. This manual comes under the category cutting machines and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Domo DO523S or do you need help? Ask your question here

| Brand | Domo |
| Model | DO523S | DO523S |
| Product | cutting machine |
| EAN | 5411397148186 |
| Language | English |
| Filetype | User manual (PDF) |
| Type of slicer | Electric |
| Product color | Silver |
| Slice thickness (max) | 15 mm |
| Housing material | Metal |
| Stainless steel blades | Yes |
| Blade diameter | 170 mm |
| Removable blade | Yes |
| Safety switch | No |
| Width | 332 mm |
| Depth | 202 mm |
| Height | 255 mm |
| Power | 120 W |
| Package width | 365 mm |
| Package depth | 105 mm |
| Package height | 220 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Domo DO523S below.
The Domo DO523S has a height of 255 mm.
The Domo DO523S has a width of 332 mm.
The Domo DO523S has a depth of 202 mm.
Yes, the Domo DO523S has stainless steel blades, which ensures durability and rust resistance for the user.
The maximum slice thickness of the Domo DO523S is 15 mm, allowing the user to achieve precise and customizable slicing results.
Yes, the housing material of the Domo DO523S is made of metal, providing a sturdy and long-lasting construction for the user.
Yes, the blade of the Domo DO523S is removable, allowing for easy cleaning and maintenance of the slicer.
No, the Domo DO523S does not have a safety switch. While this may require the user to exercise caution during operation, it also means that the machine can be used more efficiently without interruptions or limitations imposed by a safety switch.
To properly slice different types of food with the Domo DO523S cutting machine, follow these steps: 1. Pull the food carriage that is attached to the foldable tray away from the cutting edge of the blade. 2. Place the food on the food carriage and push it against the support platform with the food pusher. 3. Press and hold the safety button while pressing the on/off switch to start the machine and rotate the blade. 4. Keep the on/off switch pressed for the desired slicing duration. You can release the safety button while still pressing the on/off switch. 5. Slide the food carriage back and forth along the rotating blade on the foldable tray. 6. Release the on/off switch when you are finished slicing. Note: Always use the food pusher when slicing food smaller than 15 cm x 15 cm. For larger pieces, you can remove the food pusher, but exercise extra caution and keep your fingers away from the rotating blade. Avoid using the machine for more than 5 minutes continuously, and allow it to cool down for 15 minutes if it becomes overloaded. Remember to clean the blade, food carriage, and food pusher after each use using non-abrasive detergent/soap and water. Dry all parts thoroughly before reassembly.
The Domo DO523S cutting machine may vibrate or the blade may rotate slowly or stop altogether if it is overloaded. Here are the steps to address this issue: 1. If you notice the machine vibrating or the blade rotating slowly or stopping, immediately switch off the machine. 2. Allow the machine to cool down for 15 minutes before using it again. This will prevent overheating and potential damage to the motor. 3. Check the amount and type of food you are slicing. Ensure that you are not exceeding the recommended capacity for the machine. 4. If you are slicing larger pieces of food, remove the food pusher and exercise extra caution. Keep your fingers well away from the rotating blade to avoid any accidents. 5. Avoid slicing frozen products or meat with bones, as this can put excessive strain on the machine and cause it to vibrate or the blade to rotate slowly. 6. After the cooling period, switch on the machine and resume slicing with smaller, manageable portions of food. By following these steps, you can prevent overloading the Domo DO523S cutting machine and ensure smooth operation without any vibrations or slow rotation of the blade.
To clean the blade, food carriage, and food pusher of the Domo DO523S cutting machine, follow these steps: 1. Remove the plug from the power outlet to ensure safety during the cleaning process. 2. Set the slice thickness to the minimum before starting the cleaning. 3. Remove the blade from the slicer by turning the screw in the middle of the blade clockwise and pulling the blade out. Be careful when handling the sharp blade. 4. Clean the blade, food carriage, and food pusher in water with non-abrasive detergent/soap. Ensure thorough cleaning of all parts. 5. Rinse the cleaned parts with water and dry them thoroughly before reassembling. 6. Use a damp cloth to clean the housing of the machine. 7. Avoid using aggressive or abrasive cleansing products or scouring pads, as they may damage the machine. 8. Do not put the parts in a dishwasher. 9. Once the cleaning is complete, ensure that all parts are completely clean, dry, and cooled off before storing the machine. By following these steps, you can effectively clean the blade, food carriage, and food pusher of the Domo DO523S cutting machine, maintaining its performance and hygiene.
To ensure the longevity of the Domo DO523S cutting machine, follow these steps for proper storage: 1. Before storing the machine, make sure it is completely clean, dry, and cooled off after use. 2. Disconnect the machine from the power source by removing the plug from the outlet. 3. Fold down the foldable tray and secure it in place. 4. Store the machine in a clean and dry area, away from direct sunlight, moisture, and extreme temperatures. 5. Avoid placing heavy objects on top of the machine, as this can cause damage. 6. If possible, store the machine in its original packaging or use a protective cover to prevent dust accumulation and potential scratches. 7. Keep the machine out of reach of children and pets to ensure their safety. 8. Periodically check the stored machine for any signs of damage or wear and tear. 9. If storing for an extended period, it is recommended to remove the blade and store it separately in a safe place. By following these steps, you can properly store the Domo DO523S cutting machine, protecting it from damage and ensuring its longevity for future use.
Yes, the manual of the Domo DO523S is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Domo and is the answer not in the manual?
Question and answer
Number of questions: 0