DJI GameSir T1d manual

DJI GameSir T1d
8.5 · 9
PDF manual
 · 3 pages
English
manualDJI GameSir T1d
MENU
C2C1

II. Product Parameters

Name of the product
Model of product
Supporting platform
Bluetooth
Battery type
Input
Packaging size
Product size
Bluetooth controller T1d
T1d
Android, iOS
Bluetooth 4.0
600mAh, polymer lithium battery
5V-1A
185*180*80mm
162*101*67mm
Bluetooth controller T1d, support Bluetooth 4.0 wireless connection. It is
suitable for Android devices (version 4.3 or above) and Apple devices
(system version iOS8.0 or above). This product fully intelligent and
automatically identifies various models of equipment, no need to
manually set Android or iOS mode, connect and play.

Bluetooth controller

Operating Manual

I. Product Introduction

Troubleshoot
Product notes
Chicken Run, all rights reserved, version: 2018v1.0
III. Concept of Controller
IV. Function Description
Pair
Power display
Charging port
Power button
Photo button
Video button
Note: The factory default setting of the controller is the "America hand". The left
joystick control the height and the direction, the right joystick control the forward,
backward, and left direction of the flight.
1. Turn on and connect the controller
1) Short press the button to turn on, if it starts successfully, the ABXY
button of the controller will be always on.
2) Power display LED flickers slowly; Enter the Bluetooth mode directly
to wait for the APP connection;
3) Enter the flight control APP to connect the controller;
4) After connecting, the power display LED is always on and show the
quantity of electricity.
5) If the controller has been connected to other phones, press the "Pair"
button of the controller to force the controller to enter the state of waiting
match.
2. Turn-off
1) Long press the power button for 3-5 seconds, shut down the
controller, turn off all the LED lights;
3. Automatic turn-off
1) The controller is in connecting state, if it is idle for more than 5
minutes, the controller will turn off automatically.
2) The controller is in disconnecting state (waiting for connection), if no
connection for 2 minutes, the controller will turn off automatically.
4. Check the power
After the controller connected successfully, the LED lamp will show
current power information.
The LED lamp group shows the proportion: Fully bright is about 75% to
100%; 3 lights are about 50% to 75%; 2 lights are about 25% to 50%; 1
light is about 1% to 25%
5. Low battery alarm
1. When the available power is lower than the low power alarm voltage,
the LED light group lasts double flash;
2. When the available power is lower than the battery protection voltage,
the controller will turn off automatically.
6. Battery charging
1) LED lights 1-4 flicker slowly during charging;
2) When the charge is over (full), the LED light group is always on;
Disconnect the charging cable after charging.
7. Reset
Press the pinhole on the back of the controller quickly with the paperclip,
to force the entire controller to power off once, and reboot.
8. Firmware upgrading(OTA)
Connect the controller through the mobile phone APP Bluetooth, to
process OTA upgrade. Support Android 4.3 +, iOS8.0 + system; App
download address: www.gamesirhk/t1d
1) After entering the upgrade mode, the LED keeps on Lantern Dance,
and waits for the upgrade.
2) After the upgrade is completed, turn off the machine and restart it
automatically.
1. When you can't start the machine, Maybe the built-in battery is out of
power. Please recharge the controller with the USB line and start up
again.
2. If the controller crashed or dropped please don't keep it far away from
the device, or reconnect.
3. Factory setting (reset): There is a small hole on the back of the
controller, press it down with a toothpick or other hard bar object, press
RESET key to restore the factory setting.
1. Avoid strong vibration, don't disassemble, refit, repair by yourself.
2. Avoid storing in humid, high temperature, fumes and other places
3. Avoid the water or other liquids entering the inside of the controller, it
may affect the controller function.
4. There are batteries inside, do not drop the controller into the fire, there
is a danger of explosion.
5. The charging voltage of this product is USB 3.7-5.5V DC power
supply (ordinary Android mobile phone charging power can be used
directly), otherwise it may not be able to charge or cause damage.
6. Children need to use this product in the custody of an adult.
7. If there is a quality problem or suggestion, please contact the seller or
after sales personnel, and see the contact information on the outer
packing.
Lifting
Turn left Turn right
Back
Left Right
Falling
Custom key
Custom
key
Custom
key
Custom
key
Custom
key
Right joystick
Right joystick
Left joystick
Left joystick
Custom
key
Custom key

Manual

View the manual for the DJI GameSir T1d here, for free. This manual comes under the category Controllers and has been rated by 9 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the DJI GameSir T1d or do you need help? Ask your question here

Need help?

Do you have a question about the DJI GameSir T1d and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other DJI GameSir T1d owners to provide you with a good answer.

Mark Fontenot • 12-10-2021 No comments

Won't connect

Answer this question
Pluem2369 • 7-12-2021 No comments

How to set it's to default

How to set it's to default
View photo
Answer this question
RAP • 1-7-2021 1 comment

how do you charge gamesir t1d controller

Pluem2369 • 7-12-2021

Above it's

Above it's
View photo
Answer this question
Graham Wilson • 19-6-2021 No comments

Why don't my gamesir t1d turn on???help

Answer this question
Yasser • 22-4-2021 No comments

What's the maximum width of the mobile that T1d can hold?

Answer this question
George Holland • 7-3-2021 No comments

is there a t1d update tool app for android ?

Answer this question

Number of questions: 6

DJI GameSir T1d specifications

Below you will find the product specifications and the manual specifications of the DJI GameSir T1d.

General
Brand DJI
Model GameSir T1d | CP.PT.00000220.02
Product Controller
Language English
Filetype Usermanual (PDF)
Features
Product type Control unit
Brand compatibility DJI
Compatibility Tello
Product colour Black
Housing material Plastic,Faux leather
Battery
Battery type Built-in battery
Battery capacity 600 mAh
Rechargeable battery
Sensors
Minimum operating temperature 0 °C
Maximum operating temperature 40 °C
Power
DC voltage range 3.7 - 5.2 V
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the DJI GameSir T1d below.

Is your question not listed? Ask your question here

No results