Denver DAB-33 MK2 manual

Denver DAB-33 MK2
6.9 · 1
PDF manual
 · 4 pages
English
manualDenver DAB-33 MK2
ENG
Front view
Side view
Rear view
1. SPEAKER
2. STANDBY BUTTON
3. TUN/CH BUTTON
4. LCD DISPLAY
5. VOL+ BUTTON
6. MENU/INFO BUTTON
7. PRESET BUTTON
8. SELECT BUTTON
9. TUN/CH BUTTON
10. MODE BUTTON
11. VOL- BUTTON
12. HEADPHONE JACK
13. DC INPUT SOCKET
14. ANTENNA
15. BATTERY DOOR
SWITCHING YOUR RADIO ON FOR THE FIRST TIME
AC Operation
1. Insert the DC power jack of AC/DC adaptor to the DC input socket located at the right of the radio.
2. Plug the AC/DC Adaptor to the AC mains outlet.
3. Press the STANDBY to turn the radio on.
Remarks: If the AC Adaptor voltage is over than 6V, it will possible make the line damage.
DC (battery) operation
1. Ensure the AC/DC adaptor is disconnected from the radio and AC mains.
2. Installed the batteries (4×1.5V UM3/AA battery) into the battery compartment.
3. Press the STANDBY to turn the radio on.
Remarks: To obtain the best performance in DC operation, the use of alkaline batteries is highly
recommended.
Display backlight
When the radio is in AC mode, the display backlight will be full brightness all the time.
When the radio is in DC battery operation, the display backlight will be turned on to full brightness for
around 10 seconds and then go to dim, it will then be turned on to full brightness again for 10 seconds
on every key press. In STANDY mode, the radio and display backlight will be turn off.
DAB mode
Press the STANDY button to turn the unit on, it will automatically enter into the DAB mode and perform
auto scan function, During the scan the display show “Scanning…” together with a slide bar that
indicates the progress of the scan and the amount of stations that have been found so far.(F.1) (F.2)
Once the scan has finished, the radio will select the first alphanumerically found station. You can now
press the TUN/CH or TUN/CH button to explore the found stations followed by pressing the
SELECT button to select listening to the stations.
Note: If there is no stations found after auto scan, the radio will then enter into the Tune Select Menu,
you can now press the TUN/CH or TUN/CH button to select “Manual tune” or “Full scan” for stations.
F.1 F.2
DAB Auto Scan
The auto scan will search for the entire DAB Band III channels, after the scan has finished, the first
alphanumerically found stations will be automatically selected.
1. To activate auto scan, press and hold the MENU/INFO button for longer than 2 seconds to enter into
the Menu and then press the TUN/CH or TUN/CH button to select “Full scan”, finally press the

Manual

View the manual for the Denver DAB-33 MK2 here, for free. This manual comes under the category radios and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Denver DAB-33 MK2 or do you need help? Ask your question here

Need help?

Do you have a question about the Denver and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Denver DAB-33 MK2 specifications

Below you will find the product specifications and the manual specifications of the Denver DAB-33 MK2.

General
BrandDenver
ModelDAB-33 MK2 | 111111000201
Productradio
EAN5706751024085
LanguageEnglish
FiletypeUser manual (PDF)
Radio
Radio typePortable
Tuner typeDigital
Supported radio bandsDAB+, FM
Preset stations quantity20
Radio Data System (RDS)Yes
Display
Built-in displayYes
Display typeLCD
BacklightYes
Backlight colorBlue
Other features
Clock functionYes
Docking station includedNo
Apple docking compatibilityNot supported
Ports & interfaces
Headphone outputs1
Headphone connectivity3.5 mm
Features
Antenna typeExternal
MP3 playbackNo
ThermometerNo
ProjectionNo
Product colorWhite
ColorationMonochromatic
Volume controlDigital
Loudspeakers
Built-in speaker(s)Yes
Number of built-in speakers1
Audio
RMS rated power1 W
Weight & dimensions
Width50 mm
Depth180 mm
Height105 mm
Weight480 g
Power
Power sourceAC/Battery
AC input voltage230 V
AC input frequency50 Hz
Packaging content
AC adapter includedYes
Packaging data
Package depth267 mm
Package width64 mm
Package height113 mm
Battery
Compatible battery sizesAA
Number of batteries supported4
Logistics data
Quantity per master (outer) case8 pc(s)
Quantity per intermodal container (20ft)9800 pc(s)
Quantity per intermodal container (40ft, HC)23900 pc(s)
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Denver DAB-33 MK2 below.

What is the weight of the Denver DAB-33 MK2?

The Denver DAB-33 MK2 has a weight of 480 g.

What is the difference between FM and AM?

FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

How can I best clean my radio?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the height of the Denver DAB-33 MK2?

The Denver DAB-33 MK2 has a height of 105 mm.

What is the width of the Denver DAB-33 MK2?

The Denver DAB-33 MK2 has a width of 50 mm.

What is the depth of the Denver DAB-33 MK2?

The Denver DAB-33 MK2 has a depth of 180 mm.

Is the manual of the Denver DAB-33 MK2 available in English?

Yes, the manual of the Denver DAB-33 MK2 is available in English .

Is your question not listed? Ask your question here

No results