Denver ACT-5002 manual

Denver ACT-5002
5.7 · 1
PDF manual
 · 2 pages
manualDenver ACT-5002

ACT-5002 Quick Start Guide






Power key

Power On/Off; switch over among video recording,
capturing and playback

Shutter key

Video recording/capturing; play/stop playing video
file (Playback mode); menu confirmation

MENU key

Open and exit from menuStop play video files
(playback mode)

Up key

Digital zoom-in: select menu (after opening the
menu); file page-up; pause playing video (playback
mode); Retreat quickly video (playback mode)

Down key

Digital zoom-out: select menu (after opening the
menu); file page-down Fast forward video
(playback mode)



Indicator lights in red during charging, and the
indicator turns off after charging full.Power off



When the camera is busy (for example: during film
recording, capturing, automatic screen-off), the
busy indicator will light.

Start to use

1. Charge the built-in lithium battery

The camera is equipped with built-in 3.7V lithium battery. Please ensure power available
for the camera and timely charge it in case of low battery.
Connect the camera to computer for charging under shutdown status. The charging
indicator will be on when charging, and will be off when the battery is fully charged.
Generally, the battery can be fully charged after 2-4 hours.

2. How to use the memory card

2.1 Properly insert the TF card into the card holder as per the instructions indicated near
the card holder.
2.2 To remove the TF card, press the end of memory card gently, the card will be ejected.
Please notice: UHS (ultra highspeed) cards doesn’t work, as they are not 100% backward
Note: The camera is not equipped with built-in memory. Please insert memory card
before using. Before using the camera, it is a must to format the memory card
on the camera.

3. Startup and shutdown:

3.1 Startup: press the POWER key for 3 second, the camera will show startup screen and
enters into POWER ON state;
3.2 Shutdown: press the POWER key when the camera is under idle mode to shut down;
3.3 Auto shutdown: the camera will be shut down automatically when the camera is under
idle mode for a certain time to save power. The default time for auto shutdown is 3 min.
3.4 Shutdown under low power: when the battery is under low power, the LCD will indicate
”. Please charge the battery timely. When the icon turns red and flashes, the
camera will be shut down automatically.

4. Function modes switching

The camera has 3 modes: photo mode, recording mode, and playback mode. Use the
power key to switch the modes after starting up.
Recording mode: for recording videos;
Photo mode: for taking photos;
Playback mode: for playing back the current video.

5. Indicators

5.1 BUSY indicator: When the camera is working (e.g. recording, photographing, auto
screen off etc.), the indicator will light;
5.2 Charging indicator: In shutdown state, the lightened indicator means the user is
charging the camera.

6. Photo/recording mode

(With maximum 29 minutes video recording and then stop.Must be started manually on the
camera again.)
It enters automatically into recording mode.
Press Shutter to start recording, and press Shutter again to stop recording.
Stops automatically when 29 minutes of video recording is reached.
Press Shutter to directly take photo.
In rerecording/photo mode, press Up/Down for digital zoom in/out.
6.1 Screen display in photo mode
1. Photo mode
2. Three photos continuous
shooting mode
3. Self-timer mode
4. Photo resolution
5. Photo quality
6. Available shooting count
7. Icon of digital zoom
8. Battery state
9. Face detect
6.2 Screen display in recording mode
1. Video mode
2. Video quality
3. Video framerate
4. Video resolution
5. Available time to record
6. Face detect
7. Icon of digital zoom
8. Battery state
1. When using the HD size or FHD video, you must use the TF high-speed card at

View the manual for the Denver ACT-5002 here, for free. This manual comes under the category Camcorders and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Denver ACT-5002 or do you need help? Ask your question here

Need help?

Do you have a question about the Denver and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Denver owners to provide you with a good answer.

Number of questions: 0

Intuitive touchscreen technology lets you control your PC right from the screen. And the vibrant 1980 x 1200 resolution ...
ACT-5002 | 112101400050
User manual (PDF)
HD typeFull HD
Maximum video resolution1920 x 1080 pixels
Video resolutions1280 x 720,1920 x 1080 pixels
Video formats supportedH.264,MOV
Supported video modes720p,1080p
Maximum frame rate60 fps
Picture quality
Sensor typeCMOS
Total megapixels5 MP
Photo mode
Image formats supportedJPG
Maximum image resolution4000 x 3000 pixels
Built-in display
Display diagonal2 "
Flip-out screen-
Lens system
Field of view (FOV) angle100 °
Built-in microphone
Storage mediaMemory card
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
GPS (satellite)
Near Field Communication (NFC)
Ports & interfaces
USB 2.0 ports quantity1
USB connector typeMicro-USB
Product colourBlack
LED indicators
Battery technologyLithium
Battery capacity700 mAh
Battery life (max)1 h
Packaging content
Cables includedUSB
Underwater case
Bike mount
Helmet mount
Stand included
Underwater case waterproof up to60 m
Weight & dimensions
Weight- g
Width30 mm
Depth57 mm
Height42 mm
Logistics data
Products per intermodal container (20ft)6720 pc(s)
Products per intermodal container (40ft, HC)15840 pc(s)
System requirements
Windows operating systems supported
Mac operating systems supported
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Denver ACT-5002 below.

Is your question not listed? Ask your question here

No results