Dell PowerEdge T140 manual

Dell PowerEdge T140
9.2 · 3
PDF manual
 · 102 pages
English
manualDell PowerEdge T140

Option Description

Table 3. UEFI iSCSI Settings screen details(continued)

Option Description
iSCSI Device1 Settings Enables you to control the configuration of the iSCSI
device.

Integrated Devices

You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.

Viewing Integrated Devices

To view the Integrated Devices screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Integrated Devices.

Integrated Devices details

About this task
The Integrated Devices screen details are explained as follows:

Option

Description

User Accessible
USB Ports
Configures the user accessible USB ports. Selecting Only Back Ports On disables the front USB ports; selecting
All Ports Off disables all front and back USB ports;
The USB keyboard and mouse still function in certain USB ports during the boot process, depending on the
selection. After the boot process is complete, the USB ports will be enabled or disabled as per the setting.
NOTE: Selecting Only Back Ports On and All Ports Off disables the USB management port and also
restricts access to the iDRAC features.
Internal USB Port Enables or disables the internal USB port. This option is set to On or Off. This option is set to On by default.
iDRAC Direct USB
Port
The iDRAC Direct USB port is managed by iDRAC exclusively with no host visibility. This option is set to ON or
OFF. When set to OFF, iDRAC does not detect any USB devices installed in this managed port. This option is set
to On by default.
Embedded NIC1
and NIC2
NOTE: The Embedded NIC1 and NIC2 options are only available on systems that do not have
Integrated Network Card 1.
Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled, the NIC may still be available for
shared network access by the embedded management controller. The embedded NIC1 and NIC2 options are only
available on systems that do not have Network Daughter Cards (NDCs). The Embedded NIC1 and NIC2 option is
mutually exclusive with the Integrated Network Card 1 option. Configure the Embedded NIC1 and NIC2 option by
using the NIC management utilities of the system.
26 PowerEdge T140 Pre-operating system management applications

Manual

View the manual for the Dell PowerEdge T140 here, for free. This manual comes under the category servers and has been rated by 3 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Dell PowerEdge T140 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Dell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Dell PowerEdge T140 specifications

Below you will find the product specifications and the manual specifications of the Dell PowerEdge T140.

The Dell PowerEdge T140 is a server that belongs to the Intel® Xeon® processor family. It features 4 processor cores and 4 processor threads, allowing for efficient multitasking and high performance. The processor operates at a base frequency of 3.3 GHz and can reach a boost frequency of 4.3 GHz when needed. It has a processor cache of 8 MB, which helps to improve data access speeds and overall system responsiveness. Designed with reliability and durability in mind, the Dell PowerEdge T140 is built using high-quality materials. It offers a sturdy and robust construction, ensuring long-term performance and stability. The server's compact size allows for easy deployment in various environments, whether it be a small office or a larger enterprise setting. With its powerful processor and ample memory capacity, the Dell PowerEdge T140 is capable of handling demanding workloads. It provides a reliable foundation for businesses to run critical applications, manage databases, and perform complex analytics. The server's connectivity options include USB 3.0 ports for fast data transfer and expansion slots for additional storage or network cards. The Dell PowerEdge T140 offers efficient cooling mechanisms to prevent overheating and maintain optimal performance. It also supports remote management capabilities, allowing administrators to monitor and control the server remotely. Overall, the Dell PowerEdge T140 is a high-performance server that provides the necessary power and reliability for various business applications.

General
BrandDell
ModelPowerEdge T140 | GMRTT
Productserver
EAN5397184209967
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)
Processor
Processor familyIntel® Xeon®
Processor modelE-2124
Processor cores4
Processor boost frequency4.3 GHz
Processor threads4
Processor cache8 MB
Processor frequency3.3 GHz
Processor familyIntel® Xeon®
Processor modelE-2124
Processor cores4
Processor boost frequency4.3 GHz
Processor threads4
Processor cache8 MB
Processor frequency3.3 GHz
Number of processors installed1
Motherboard chipsetIntel C246
Processor manufacturerIntel
Processor lithography14 nm
Processor socketLGA 1151 (Socket H4)
Supported instruction setsAVX 2.0, SSE4.1, SSE4.2
System bus rate8 GT/s
Processor operating modes64-bit
Execute Disable BitYes
Idle StatesYes
Thermal Monitoring TechnologiesYes
Scalability1S
Tjunction100 °C
Embedded options availableNo
Bus typeDMI3
PCI Express configurations1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP)71 W
Processor codenameCoffee Lake
Maximum number of PCI Express lanes16
Processor cache typeSmart Cache
Maximum internal memory supported by processor128 GB
Memory types supported by processorDDR4-SDRAM
Memory clock speeds supported by processor2666 MHz
Memory bandwidth supported by processor (max)41.6 GB/s
Processor package size37.5 x 37.5 mm
Graphics
On-board graphics card model-
On-board graphics card-
On-board graphics card modelNot available
Memory
Internal memory8 GB
Memory clock speed2666 MHz
Memory layout (slots x size)1 x 8 GB
ECCYes
Internal memory typeDDR4-SDRAM
Maximum internal memory64 GB
Memory slots4x DIMM
Buffered memory typeUnregistered (unbuffered)
Storage
Total storage capacity1000 GB
Number of HDDs installed1
HDD speed7200 RPM
HDD size3.5 "
HDD capacity1000 GB
HDD interfaceSerial ATA
Optical drive typeDVD-RW
RAID supportNo
Maximum storage capacity- TB
Number of HDDs supported4
Supported HDD sizes3.5 "
Supported storage drive interfacesSAS, Serial ATA
Supported RAID controllersPERC H330+
Software
Operating system installedNo
Compatible operating systems- Microsoft Windows Server with Hyper-V\n- Red Hat Enterprise Linux\n- SUSE Linux Enterprise Server\n- VMware ESXi\n- Citrix XenServer\n- Ubuntu Server\n- Certify XenServerf
Design
Chassis typeTower
Product colorBlack
Performance
Remote administrationiDRAC9 Basic
Ports & interfaces
USB 2.0 ports quantity4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
VGA (D-Sub) ports quantity1
Ethernet LAN (RJ-45) ports2
Serial ports quantity1
Network
Ethernet interface typeGigabit Ethernet
Ethernet LANYes
Weight & dimensions
Height360 mm
Depth454 mm
Width175 mm
Package width572 mm
Package depth505 mm
Package height394 mm
Package weight15400 g
Operational conditions
Operating altitude0 - 3048 m
Storage temperature (T-T)-40 - 65 °C
Non-operating altitude0 - 12000 m
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 80 %
Operating temperature (T-T)10 - 35 °C
Expansion slots
PCI Express x1 (Gen 3.x) slots1
PCI Express x8 (Gen 3.x) slots2
PCI Express x16 (Gen 3.x) slots1
PCI Express slots version3.0
Power
Power supply input frequency50 - 60 Hz
Redundant power supply (RPS) supportNo
Power supply365 W
Number of main power supplies1
Packaging content
Cables includedAC
Processor special features
Intel® Hyper Threading Technology (Intel® HT Technology)No
Intel® Turbo Boost Technology2.0
Intel® AES New Instructions (Intel® AES-NI)Yes
Enhanced Intel SpeedStep TechnologyYes
Intel Trusted Execution TechnologyYes
CPU configuration (max)1
Intel Enhanced Halt StateYes
Intel VT-x with Extended Page Tables (EPT)Yes
Intel TSX-NIYes
Intel® Secure KeyYes
Intel 64Yes
Intel® OS GuardYes
Intel Virtualization Technology for Directed I/O (VT-d)Yes
Intel Software Guard Extensions (Intel SGX)Yes
Intel Secure Key Technology version1.00
Intel Virtualization Technology (VT-x)Yes
Intel TSX-NI version1.00
Processor ARK ID134856
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Dell PowerEdge T140 below.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

What is the height of the Dell PowerEdge T140?

The Dell PowerEdge T140 has a height of 360 mm.

What is the width of the Dell PowerEdge T140?

The Dell PowerEdge T140 has a width of 175 mm.

What is the depth of the Dell PowerEdge T140?

The Dell PowerEdge T140 has a depth of 454 mm.

How do I properly install additional memory on my Dell PowerEdge T140 server?

Ensure the server is powered off, open the server chassis, locate the memory slots, insert the memory modules at the correct orientation, firmly press them down until they click into place, and then close the chassis.

What steps should I follow to configure RAID on my Dell PowerEdge T140 server?

Access the RAID controller configuration utility during startup, create a new virtual disk, choose the RAID level and stripe size, select the desired physical disks, and save the configuration before exiting.

How can I connect external USB devices to my Dell PowerEdge T140 server?

Identify the available USB ports on the server chassis, insert the USB device's connector into the corresponding port, ensure a stable connection, and then verify that the device is recognized by the server.

What is the process for updating the firmware of my Dell PowerEdge T140 server?

Obtain the latest firmware updates from the Dell website, transfer the downloaded files to a USB drive, insert the USB drive into a server USB port, access the Unified Server Configurator during startup, select the firmware update option, choose the USB drive as the update source, and follow the on-screen instructions.

How can I efficiently troubleshoot hardware errors on my Dell PowerEdge T140 server?

Access the iDRAC web interface or the OpenManage Server Administrator (OMSA) tool, review the server logs for error messages, identify the specific hardware component that is causing the issue, refer to Dell's support resources or contact their technical support for further assistance.

Does Dell PowerEdge T140 have Intel Xeon processor?

Yes, Dell PowerEdge T140 has Intel Xeon processor. This means that it is equipped with a high-performance processor that is designed for server applications.

How many processor cores does Dell PowerEdge T140 have?

Dell PowerEdge T140 has 4 processor cores. This means that it can handle multiple tasks and processes simultaneously, which is ideal for server applications that require high processing power.

What is the processor boost frequency of Dell PowerEdge T140?

The processor boost frequency of Dell PowerEdge T140 is 4.3 GHz. This means that the processor can automatically increase its clock speed to provide extra performance when needed, resulting in faster processing of demanding tasks.

Does Dell PowerEdge T140 support ECC memory?

Yes, Dell PowerEdge T140 supports ECC memory. This means that it has error correction capabilities, which help to detect and correct data errors in real-time, ensuring data integrity and system stability.

How much storage capacity does Dell PowerEdge T140 have?

Dell PowerEdge T140 has a total storage capacity of 1000 GB. This means that it provides ample storage space for storing large amounts of data or running applications that require significant storage resources.

Is the manual of the Dell PowerEdge T140 available in English?

Yes, the manual of the Dell PowerEdge T140 is available in English .

Is your question not listed? Ask your question here

No results