DAP-Audio P-2000 manual

DAP-Audio P-2000
(1)
  • Number of pages: 18
  • Filetype: PDF

Palladium

P-400 ORDERCODE D4131(B)

P-500 ORDERCODE D4132(B)

P-700 ORDERCODE D4133(B)

P-900 ORDERCODE D4134(B)

P-1200 ORDERCODE D4135(B)

P-1600 ORDERCODE D4136(B)

P-2000 ORDERCODE D4137(B)

Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
Phone: +31 45-5667700
DAP-Audio P-2000

Need help?

Number of questions: 2

Do you have a question about the DAP-Audio P-2000 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other DAP-Audio P-2000 owners to properly answer your question.

stuart martin, 15-9-2016 22:44:21 No comments

amp gets really hot on right channel is it going to burn out

Answer this question
stuart martin, 13-9-2016 23:32:37 No comments

i have a dap audio p 2000 amplifier gets very hot on right channel like its overheating get very hot soon as its turned on but works fine otherwise any suggestions fans work ok very clean inside look forward to hearing from you asap stuart

Answer this question

View the manual for the DAP-Audio P-2000 here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the DAP-Audio P-2000 or do you need help? Ask your question here

DAP-Audio P-2000 specifications

General
Brand DAP-Audio
Model P-2000
Product Receiver
EAN 8717748287632
Language English
Filetype PDF
Audio
Audio output channels 2.0 channels
Peak power per channel 1050 W
Amplifier class -
Total Harmonic Distortion (THD) 0.05 %
Signal-to-Noise Ratio (SNR) 105 dB
Damping factor 300
RMS power output per channel (4 Ohm) 1050 W
RMS power output per channel (8 Ohm) 700 W
Crosstalk (1kHz) 60 dB
Bridge-mode power output per channel (8 Ohm) 2100 W
Input sensitivity 1000 mV
Input impedance 20000 Ω
Frequency range 20 - 45000 Hz
Ports & interfaces
Speakers connectivity type XLR / 1/4" / RCA
Technical details
Product colour Black
Purpose -
Connectivity technology Wired
On/off switch
Cooling type Active
Power
AC input voltage 200-240 V
AC input frequency 50 - 60 Hz
Power consumption (typical) 2925 W
Power protection features Overheating,Overload,Short circuit
Weight & dimensions
Width 483 mm
Depth 430 mm
Height 89 mm
Weight 19800 g
Packaging content
Manual
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the DAP-Audio P-2000.

Is your question not listed? Ask your question here