View the manual for the Danfoss TPOne-M here, for free. This manual comes under the category thermostat and has been rated by 12 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Danfoss TPOne-M or do you need help? Ask your question here
The Danfoss TPOne-M is a thermostat designed for controlling heating systems in residential and commercial buildings. It offers advanced temperature control features and is compatible with various heating technologies, including gas, oil, electric, and heat pumps. The TPOne-M thermostat comes with a user-friendly interface and an intuitive touchpad for easy operation. It allows users to easily adjust temperature settings, set heating schedules, and manage different heating zones. The device also offers a vacation mode that enables users to save energy while they are away. Designed with energy efficiency in mind, the TPOne-M incorporates adaptive learning algorithms that help optimize the heating system's performance and reduce energy consumption. It also features an open-window detection function that automatically adjusts the temperature when a sudden change in room temperature is detected. The TPOne-M thermostat is compatible with the Danfoss Link system, allowing users to control their heating from anywhere using a smartphone or tablet. It also supports wireless room sensors for more accurate temperature control in specific areas. Constructed with quality materials, the TPOne-M thermostat is built to last and withstand daily use. It is designed to be easily installed and can be mounted on a wall or placed on a tabletop. With its sleek and modern design, the TPOne-M blends well with any home or office decor. In conclusion, the Danfoss TPOne-M thermostat offers advanced temperature control features, energy efficiency, and ease of use. With its compatibility with different heating technologies and support for remote control, it provides a reliable and convenient heating solution for residential and commercial applications.
| Brand | Danfoss |
| Model | TPOne-M | 087N7852 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Danfoss TPOne-M below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
To set the desired temperature on your Danfoss TPOne-M thermostat, use the control knob or buttons located on the front of the thermostat. Simply rotate or press the appropriate control until you reach your desired temperature setting.
To adjust the schedule on your Danfoss TPOne-M thermostat, access the menu options by pressing the menu button on the thermostat. Navigate through the menu using the arrow buttons to find the scheduling option. From there, you can modify the pre-set schedule to suit your preferences.
To temporarily override the current temperature on your Danfoss TPOne-M thermostat, locate the "Override" button on the front of the device. Press this button and manually adjust the temperature using the control knob or buttons. The override will maintain the new temperature setting until the next scheduled event occurs.
Yes, it is possible to adjust both the heating and cooling setpoints on your Danfoss TPOne-M thermostat. Access the menu options by pressing the menu button on the thermostat and navigate to the setpoint adjustment option. From there, you can modify the desired setpoints for both heating and cooling modes.
To enable the energy-saving mode on your Danfoss TPOne-M thermostat, access the menu options by pressing the menu button. Look for the energy-saving mode option within the menu and activate it. This feature aims to optimize energy usage by adjusting the temperature setpoints according to specific time periods or occupancy patterns. Remember to customize the energy-saving settings based on your preferences and requirements.
Yes, the manual of the Danfoss TPOne-M is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Danfoss and is the answer not in the manual?
Question and answer
Number of questions: 33Frost risk showing on display. I've tried clearing it and keeps saying! Warning cannot be cleared, issue still exists?? How do I clear it?
1 comment
To clear the frost risk displayed on the Danfoss TPOne-M thermostat, follow these steps: 1. Press the menu button on the thermostat. 2. Navigate to the "Clear Warnings" menu option. 3. Select the "Clear Warnings" option to cancel the frost risk warning. 4. The frost risk message will be cleared from the display. Note: If the heat source is faulty, there is still a risk of frost damage even after clearing the warning. It is recommended to check the heating system to ensure it is operating correctly.
This answer is automatically generatedGood evening. I set my thermostat to a lower temperature on the sleep setting today and when I checked it later, the screen is now blank. It has the low battery symbol, which I thought might be the issue, but our downstairs thermostat is at the same battery level and still working. When I hold down any button, the screen lights up but no additional information is displayed. Is this likely a battery problem or could I have accidentally pressed the wrong button when adjusting the sleep temperature earlier today?
Hi, How do I bring down the room temperature? It keeps on going up even if I try to adjust it down. For some reason, it is defaulted to 22-23 degrees which makes the whole flat warm. This was at 18 before which was just right. Please help as it’s increasing my heat bills every month.
1 comment
To lower the room temperature on the Danfoss TPOne-M thermostat, follow these steps: 1. Press the "User Menu" button. 2. Select "Temperatures" from the menu. 3. Choose the "Home AM" or "Home PM" option, depending on the time of day you want to adjust. 4. Use the arrow buttons to decrease the temperature to your desired setting. 5. Press the "OK" button to save the new temperature.
This answer is automatically generatedI have purchased a TPOne M to replace my TP9000si-ma. I cannot get the new unit to work with the heating. Hot water is ok but although the display shows it is calling for heat the boiler never fires up when room temperature drops below the thermostat temperature. My wiring for old TP9000 is attached and I thought it would be a simple matter to connect Live & Neutral with the old no3 terminal (grey wire ) being wired to NO2 on TPOne and old no4 terminal (black wire) being wired to NO1 on TPOne. Can you advise?
Hi, I have district heating / hot water and on my TPOne-M, I noticed that the common wire (COM) is connected to normally closed 2 (NC2). Is this normal? Why would this be set up like this?
Tp one thermostat recently fitted but was not tested by electrician who fit. Central heating clicks on but radiators do not warm up Hot water works fine.
Hi iv just moved into a council flat n it has TPOne M thermostat which seems 2b stuck on lock how do I undo
My thermostat is showing external sensor fail and power off symbol how to reset this
Frost risk warning has appeared after battery change, won't let me clear warning as issue still exists. Now saying sensor fail also, I don't have a sensor! Heating won't switch off unless I remove thermostat completely!