View the manual for the Danby Silhouette DIM32D2BSSPR here, for free. This manual comes under the category ice-cream makers and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Danby Silhouette DIM32D2BSSPR or do you need help? Ask your question here
The Danby Silhouette DIM32D2BSSPR is an ice cream maker that offers a convenient way to create delicious frozen treats in the comfort of your own home. Designed with functionality in mind, this ice cream maker allows you to easily make a variety of flavors to suit your taste. The sleek and stylish stainless steel design of the DIM32D2BSSPR adds a touch of elegance to any kitchen. Its compact size makes it easy to store when not in use, while still providing ample capacity to make up to 2 liters of ice cream at a time. Equipped with a built-in compressor, this ice cream maker eliminates the need for pre-freezing the mixing bowl, saving you time and effort. Its efficient cooling system ensures that your ice cream freezes evenly and consistently, resulting in smooth and creamy textures. The DIM32D2BSSPR features a digital display and electronic controls, making it easy to set the desired freezing time and temperature. This allows you to customize your ice cream making process according to your preferences. With its transparent lid, you can easily monitor the progress of your ice cream as it churns. The lid also helps to prevent any unwanted contaminants from entering the machine, ensuring hygienic and safe ice cream making. Overall, the Danby Silhouette DIM32D2BSSPR offers a reliable and convenient solution for making homemade ice cream. Its user-friendly features and sleek design make it a great addition to any kitchen.
| Brand | Danby |
| Model | Silhouette DIM32D2BSSPR |
| Product | ice-cream maker |
| EAN | 067638000253 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Danby Silhouette DIM32D2BSSPR below.
To troubleshoot if the Danby Silhouette DIM32D2BSSPR ice-cream maker is not producing ice, you can follow these steps: 1. Check the power supply: Ensure that the appliance is properly plugged into a functioning power outlet. If there is a power failure, the ice-cream maker may not operate. Check if a fuse is blown or if the circuit breaker has tripped. 2. Verify the ice size setting: Make sure that you have selected an appropriate ice size setting. If the chosen ice size is too small, it may affect the ice production. 3. Check the door and ambient conditions: Ensure that the door of the ice-cream maker is properly shut and not opened excessively. Also, check if the appliance is placed in close proximity to a heat source or direct sunlight. High ambient temperature or humidity can affect the ice production. 4. Inspect the water supply: Check if the water inlet connection is leaking. Also, ensure that the drain hose connection is not leaking and that the drain caps on the ice bucket are completely closed. 5. Contact customer care: If the troubleshooting steps mentioned above do not resolve the issue, it is recommended to contact Silhouette Consumer Care for further assistance. They can provide specific troubleshooting guidance or arrange for authorized service if needed. Remember to refer to the user manual for any specific instructions or diagrams related to troubleshooting the ice-cream maker.
If the indicator light for the water tank is constantly on, indicating it is full, but there is no water in the tank, you can try the following steps to troubleshoot the issue: 1. Check for water leakage: Inspect the water inlet connection and the drain hose connection for any signs of leakage. Ensure that the drain caps on the ice bucket are completely closed. 2. Verify the water supply: Make sure that the water supply to the ice-cream maker is functioning normally. Check if the water source is turned on and if there are any issues with the water pressure or flow. 3. Clean the water tank sensor: The constant indicator light may be caused by a dirty or malfunctioning water tank sensor. Clean the sensor using a soft cloth or sponge dampened with water. Avoid using abrasive cleaners or sharp objects that may damage the sensor. 4. Reset the appliance: Turn off the ice-cream maker and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset the appliance and resolve any temporary issues. 5. Contact customer care: If the troubleshooting steps mentioned above do not resolve the issue, it is recommended to contact Silhouette Consumer Care for further assistance. They can provide specific troubleshooting guidance or arrange for authorized service if needed. Remember, these steps are general guidelines and may vary depending on the specific model of the Danby Silhouette DIM32D2BSSPR ice-cream maker.
To fix water leakage from the Danby Silhouette DIM32D2BSSPR ice-cream maker, you can follow these steps: 1. Check for water leakage points: Inspect the water inlet connection and the drain hose connection for any signs of leakage. Ensure that the connections are tight and secure. 2. Verify the water supply line: Make sure that the water supply line is properly connected and not damaged. Check for any kinks or bends in the line that may be causing water leakage. 3. Clean and inspect the water tank: Remove any ice or debris from the water tank. Check for any cracks or damage to the tank that may be causing water to leak. If there are any issues, contact customer care for further assistance. 4. Check the drain caps: Ensure that the drain caps on the ice bucket are tightly closed. If they are loose or damaged, replace them to prevent water leakage. 5. Contact customer care: If the troubleshooting steps mentioned above do not resolve the water leakage issue, it is recommended to contact Silhouette Consumer Care for further assistance. They can provide specific troubleshooting guidance or arrange for authorized service if needed. Remember, these steps are general guidelines and may vary depending on the specific model of the Danby Silhouette DIM32D2BSSPR ice-cream maker.
To fix excessive noise or vibrations from the Danby Silhouette DIM32D2BSSPR ice-cream maker during operation, you can try the following steps: 1. Ensure the appliance is level: Check if the ice-cream maker is placed on a level surface. If it is not level, adjust the leveling feet or place a shim under the appliance to stabilize it. 2. Verify proper installation: Make sure the ice-cream maker is installed according to the manufacturer's instructions. Improper installation, such as inadequate air circulation or abnormal operating conditions, can cause excessive noise or vibrations. 3. Check for obstructions: Inspect the ice-cream maker for any objects or debris that may be causing the noise or vibrations. Remove any obstructions and ensure that the appliance is clear of any obstacles. 4. Contact customer care: If the troubleshooting steps mentioned above do not resolve the issue, it is recommended to contact Silhouette Consumer Care for further assistance. They can provide specific troubleshooting guidance or arrange for authorized service if needed. Remember, these steps are general guidelines and may vary depending on the specific model of the Danby Silhouette DIM32D2BSSPR ice-cream maker.
To resolve the issue if the ice maker alarm keeps going off even when the ice bucket is not full in the Danby Silhouette DIM32D2BSSPR ice-cream maker, you can follow these steps: 1. Check the ice level sensor: Inspect the ice level sensor located inside the ice bucket. Ensure that it is clean and free from any ice or debris that may be causing a false reading. Clean the sensor using a soft cloth or sponge dampened with water. 2. Reset the appliance: Turn off the ice-cream maker and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset the appliance and resolve any temporary issues with the ice level sensor. 3. Verify the ice bucket placement: Ensure that the ice bucket is properly placed and aligned with the ice maker. If it is not positioned correctly, it may trigger the alarm. Remove the ice bucket and reinsert it, making sure it is securely in place. 4. Contact customer care: If the troubleshooting steps mentioned above do not resolve the issue, it is recommended to contact Silhouette Consumer Care for further assistance. They can provide specific troubleshooting guidance or arrange for authorized service if needed. Remember, these steps are general guidelines and may vary depending on the specific model of the Danby Silhouette DIM32D2BSSPR ice-cream maker.
Yes, the manual of the Danby Silhouette DIM32D2BSSPR is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Danby and is the answer not in the manual?
Question and answer
Number of questions: 1I need to know on a new home install what is the wattage