•Incorporate a readily accessible disconnect device in the building installation wiring for quick
power disconnect to the unit.
•Dahua assumes no liability or responsibility for any fire or electrical shock caused by improper
handling or installation.
Environmental Precautions
•Transport, use, and store the unitwithin the specified temperature and humidity range.
•Do not place the unit in a wet, dusty, extremely hot or anextremelycold environment; and avoid
environments with strong electromagnetic radiationor unstable lighting.
•Never push objects of any kind into this unit through openings as theymaytouch dangerous
voltage points or cause a short circuit that may result in fire or electrical shock. Take care to not
spill any liquid on the unit.
•Do not use units intended for indoor applications near water, in damp or wet environments, or in
any area classified as a wet location. Do not expose an indoor unit to rain ormoisture to reduce
the risk of fire or electric shock.
•Do not block or cover any openings in the unit enclosure. These openings are provided for
ventilation to prevent overheating and to ensure reliable operation. Ensure the unit is placed in
an area withadequate ventilation.
•Do not place the unit near a heat source such as heaters, stoves, radiators or other equipment
that produces heat.
•Use the following guidelines if placing the unit in a rack-mount:
•The ambient temperature of a rack-mount environmentmay exceed the recommended
operating temperature of the unit. Take care to read the ambient temperature before
installation.
•A rack-mount environment may restrict the movement of air. Ensure the unit receives the
proper amount of air flow required for safe operation or install the unit elsewhere.
•A rack mount is capable of supporting a maximum weight. Ensure the rack mount can support
the additional weight of this unit.
•A rack mount environment requires proper and adequate circuitry. Ensure the circuits tothe
rack are capable of handling the electrical requirements of all units in the rack to protect
against circuit overloads.
•Pack the unitwith standard factory packaging or material of the same quality when transporting
the unit.
•Take care to avoid heavystress, violent vibration, or water spills to the camera unit during
transportation, storage, and installation.
Operation and Daily Maintenance
•Do not touch the heat dissipation component of the unit. This part of the unit is hot and may
cause a burn.
•Do not open or dismantle the device;there areno components that a user can fix or replace.
Opening the unit may cause water leakage orexpose components to direct light. Contact the
manufacturer or a qualified service representative to service the camera or to replace a
component, including the desiccant.
•Dahua recommends the use of a thunder-proof device in concert with the unit.
•Use adry soft cloth to clean the unit’s housing.If the unit is particularly dusty, use water to dilute
a mild detergent, apply the diluted detergent to a soft cloth, then gently clean the device. Finally,
use a dry cloth to wipe the unit dry. Do not use a volatile solvent like alcohol, benzene, or thinner;
or use a strong detergent with abrasives, which may damage the surface coating or reduce the
working performance of the unit.
Warnings
•Changethe default password after the initial login to protect the integrity of the network.
•Usethe standard accessoriesprovidedbythemanufacturer and ensurethe unit is installed and
commissionedby qualified professionals.
Manual
View the manual for the Dahua Technology C52A2N3 here, for free. This manual comes under the category voice recorders and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Dahua Technology C52A2N3 or do you need help? Ask your question here
Need help?
Do you have a question about the Dahua Technology and is the answer not in the manual?
Question and answer
Number of questions: 0