D-Link DCS-2210L manual

D-Link DCS-2210L
7.4 · 1
PDF manual
 · 61 pages
English
manualD-Link DCS-2210L
48D-Link DCS-2210/2230 User Manual

Conguration

Advanced

This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical
interface for digital output (DO) and digital input (DI) that is used for connecting a variety of external alarm devices such as IR-Sensors
and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.
After making any changes, click the Save Settings button to save your changes.

Digital Input/Output

Select D/I or D/O Mode:
LED:
The camera will send a signal when an event is
triggered, depending upon the type of device connected
to the DI circuit.
N.C. stands for Normally Closed. This means that
the normal state of the circuit is closed. Therefore
events are triggered when the device status changes
to "Open."
N.O. stands for Normally Open. This means that the
normal state of the circuit is open. Therefore events
are triggered when the device status changes to
"Closed."
You may specify whether or not to illuminate the LED
on the side of the camera.

View the manual for the D-Link DCS-2210L here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the D-Link DCS-2210L or do you need help? Ask your question here

Need help?

Do you have a question about the D-Link and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other D-Link owners to provide you with a good answer.

Number of questions: 0

No need to buy external speakers for great audio.  With integrated speakers this display is ready to go once you’re conn...
General
D-Link
DCS-2210L | DCS-2210L
Security camera
790069411700, 790069411816, 0790069411700, 0790069411816, 7426045985912
English
User manual (PDF)
Performance
TypeIP security camera
PTZ control
Placement supportedIndoor
Day/night mode
Connectivity technologyWired
CertificationCE\r\nCE LVD\r\nFCC\r\nC-Tick
Design
Form factorCube
Product colourWhite
Video
Maximum resolution1920 x 1080 pixels
Video formats supportedH.264, M-JPEG
Supported graphics resolutions320 x 240,480 x 270,640 x 360,1280 x 960,1024 x 768 (XGA),1280 x 720 (HD 720),1920 x 1080 (HD 1080),800 x 600 (SVGA)
Supported video modes-
Frame rate30 fps
Total megapixels2 MP
Full HD
Camera
Minimum illumination0 lx
Lens viewing angle, horizontal103 °
Lens viewing angle, vertical55 °
Lens viewing angle, diagonal118 °
Image sensor
Sensor typeCMOS
Optical sensor size1/2.7 "
Lens system
Zoom capability-
Optical zoom- x
Digital zoom10 x
Focus adjustment1.8
Fixed focal length2.8 mm
Security
Video motion detection
IP address filtering
Password protection typeSupervisor, User
HTTPS encryption
Storage
Card reader integrated
Compatible memory cardsMicroSD (TransFlash), MicroSDHC
Built-in HDD
Night vision
Night vision
Night vision distance5 m
LED typeIR
Network
Ethernet LAN
Cabling technology10/100Base-T(X)
Wi-Fi
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocolsTCP/IP UDP ICMP DHCP client NTP client (D-Link) DNS client DDNS client (D-Link) SMTP client FTP client Bonjour HTTP / HTTPS Samba client PPPoE UPnP RTP / RTSP/ RTCP IP filtering QoS CoS Multicast IGMP ONVIF
Other features
Compliance industry standardsIEEE802.3af PoE
Ports & interfaces
Ethernet LAN (RJ-45) ports1
DC-in jack
Audio
Audio formats supportedAAC
Built-in microphone
Built-in speaker(s)
Weight & dimensions
Width58 mm
Depth38.7 mm
Height85 mm
Weight80 g
Power
Power over Ethernet (PoE)
AC input voltage100-240 V
AC input frequency50 - 60 Hz
DC output current1.2 A
DC output voltage+5V
Power consumption (max)3.5 W
Power source typePoE
Management features
Web-based management
Reset button
Remotely operated
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-20 - 70 °C
Operating relative humidity (H-H)20 - 80 %
Storage relative humidity (H-H)5 - 95 %
System requirements
Windows operating systems supported
Packaging content
Bundled softwareD-Link D-ViewCam
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the D-Link DCS-2210L below.

Is your question not listed? Ask your question here

No results