CyberPower Doorsensor manual

CyberPower Doorsensor
(1)
  • Number of pages: 2
  • Filetype: PDF

Package Contents

Installation Guide

Step 1. Wire the DOORSENSOR to an ENVIROSENSOR
(sold separately) as shown below. One wire
connects to any of the Dry Contact Input terminals
(1-4) and the remaining wire connects to the COM
terminal.
Rack Enclosure Front Door
Rack Enclosure Rear Door
NOTE: The DOORSENSOR should be mounted on the opening
end of the enclosure door (opposite side of the hinges).
The magnet should be mounted flush against the inside
edge of the door. Align the switch with the magnet
mounted on the enclosure door and adhere it to the
outside of the enclosure frame where the door closes.
(1) Door Switch Sensor with 10ft (3m) Cable
(6) Cable Ties
(3) Adhesive Cable Tie Holders
(6) (M2x10) Screws
(Two are spare)
Normal Door
NOTE: The DOORSENSOR should be mounted on the opening
end of the door (opposite side of the hinges).
321 4
COM
Copyright © 2016 Cyber Power Systems, Inc. All rights reserved.
USER’S MANUAL
SAVE THESE INSTRUCTIONS
Please read this manual and follow the instructions for installation and use.
K01-0000444-01
Step 2. Clean the surface of the area where the sensor will
be installed.
Step 3. Remove the protective strip behind the sensor to
expose the adhesive tape backing. Place the sensor
on the desired location and press firmly for 30
seconds.

Magnetic Door Switch SensorMagnetic Door Switch Sensor

DOORSENSOR

RECON SERIESRECON SERIES

Switch
Magnet
Switch Magnet
CyberPower Doorsensor

Need help?

Number of questions: 0

Do you have a question about the CyberPower Doorsensor or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other CyberPower Doorsensor owners to properly answer your question.

View the manual for the CyberPower Doorsensor here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the CyberPower Doorsensor or do you need help? Ask your question here

CyberPower Doorsensor specifications

General
Brand CyberPower
Model Doorsensor
Product Not categorized
EAN 0649532614660
Language English
Filetype PDF
Features
Cable length 3 m
Product colour Grey
Packaging data
Package width 169.9 mm
Package depth 108.9 mm
Package height 27.9 mm
Package weight 92.9 g
Technical details
Sustainability certificates RoHS
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the CyberPower Doorsensor.

Is your question not listed? Ask your question here