CyberData Systems SIP-enabled IP V2 011098B manual

CyberData Systems SIP-enabled IP V2 011098B
(1)
  • Number of pages: 4
  • Filetype: PDF
Quick Start Guide 930398E
The IP Endpoint Company

1.0 Out-of-Box and Prior to Final Installation

1.1. Verify that you have received all of the parts listed on the Installation Quick
Reference placemat.
1.2. Download the current manual, otherwise known as an Operation Guide,
which is available on the Documentation page at the following website
address:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2/docs.html
Note You can also navigate to the Documentation page by going to
www.CyberData.net
and following the steps that are indicated by
the following figures:

2.0 Select Power Source

PoE Switch PoE Injector
Set PoE power type to Class 0 = 15.4W CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
2
3
1

VoIP V2 Ceiling Speaker

Quick Start Guide

Index

CyberData Systems SIP-enabled IP V2 011098B

Need help?

Number of questions: 0

Do you have a question about the CyberData Systems SIP-enabled IP V2 011098B or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other CyberData Systems SIP-enabled IP V2 011098B owners to properly answer your question.

View the manual for the CyberData Systems SIP-enabled IP V2 011098B here, for free. This manual comes under the category Speakers and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the CyberData Systems SIP-enabled IP V2 011098B or do you need help? Ask your question here

CyberData Systems SIP-enabled IP V2 011098B specifications

General
Brand CyberData Systems
Model SIP-enabled IP V2 011098B
Product Speaker
Language English
Filetype PDF
Performance
Recommended usage Other
Suitable for outdoor use
Product colour -
Housing material -
Loudspeakers
Audio output channels 1.0 channels
Speaker placement Ceiling-mountable
Speaker enclosure Closed
Number of drivers 1
Tweeter -
Woofer -
Speaker type 1-way
Amplifier
Amplifier -
Audio
RMS rated power - W
Peak Music Power Output (PMPO) 10 W
Frequency range - Hz
Impedance - Ω
Sensitivity 96 dB
Other features
Equalizer -
Ethernet LAN
Ports & interfaces
Connectivity technology Wired
Weight & dimensions
Width 228.6 mm
Depth 228.6 mm
Height 60.96 mm
Power
Power source type PoE
Operational conditions
Operating temperature (T-T) -10 - 50 °C
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the CyberData Systems SIP-enabled IP V2 011098B.

Is your question not listed? Ask your question here