CyberData Systems Singlewire 011182 manual

CyberData Systems Singlewire 011182
  • Number of pages: 2
  • Filetype: PDF
Quick Start Guide 930465A

1.0 Out-of-Box and Prior to Final Installation

1.1. Verify that you have received all of the parts listed on the Installation Quick Reference placemat.
1.2. Download the current manual, otherwise known as an Operation Guide, which is available on the
Documentation page at the following website address:

2.0 Select Power Source

3.0 Power Test

3.1. Plug in the CyberData device and monitor the LED activity on the front of the device. See the
following figure:
3.2. The GREEN power/status LED and the YELLOW network LED come on immediately. The
YELLOW network LED will blink to indicate network traffic. After about 27 seconds, the GREEN
power/status LED will blink twice to indicate that the board is fully booted.
This concludes the power test.
PoE Switch PoE Injector
Set PoE power type to IEEE 802.3af
Power Class 0 (15.4W)
a. When initiating the device for the first time, we recommend manually adjusting the PoE switch port power
setting to Class 3 to ensure sufficient power allocation. Once the initial setup has been completed and the
device is SIP enabled, the Administrator may prefer a final power setting adjustment to Class 0.
CAT6 cable recommended—for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
(Green LED)
(Yellow LED)
The IP Endpoint Company

V2 Speaker, Push-to-Talk, Singlewire

Quick Start Guide

CyberData Systems Singlewire 011182

Need help?

Number of questions: 0

Do you have a question about the CyberData Systems Singlewire 011182 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other CyberData Systems Singlewire 011182 owners to properly answer your question.

View the manual for the CyberData Systems Singlewire 011182 here, for free. This manual comes under the category Speakers and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the CyberData Systems Singlewire 011182 or do you need help? Ask your question here

CyberData Systems Singlewire 011182 specifications

Brand CyberData Systems
Model Singlewire 011182
Product Speaker
Language English
Filetype PDF
Recommended usage Other
Suitable for outdoor use
Product colour Grey,White
Certification FCC A, UL 60950
Housing material -
Audio output channels 1.0 channels
Speaker placement Ceiling-mountable
Speaker enclosure Closed
Number of drivers 1
Tweeter -
Woofer -
Speaker type 1-way
Amplifier -
RMS rated power - W
Peak Music Power Output (PMPO) 10 W
Frequency range - Hz
Impedance - Ω
Sensitivity 96 dB
Other features
Equalizer -
Ethernet LAN
Ports & interfaces
Connectivity technology Wired
Weight & dimensions
Width 228.6 mm
Depth 228.6 mm
Height 60.96 mm
Power source type PoE
Operational conditions
Operating temperature (T-T) -10 - 50 °C
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the CyberData Systems Singlewire 011182.

Is your question not listed? Ask your question here