View the manual for the Crivit 1-LD4497 IAN 285066 here, for free. This manual comes under the category sport watches and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the Crivit 1-LD4497 IAN 285066 or do you need help? Ask your question here
| Brand | Crivit |
| Model | 1-LD4497 IAN 285066 |
| Product | sport watch |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crivit 1-LD4497 IAN 285066 below.
It is sensible for you to switch off your sport watch at night, this ensures longer battery life.
No, no internet is required to receive GPS.
The abbreviation GPS stands for 'Global Positioning System'.
GPS is a system that can be used all over the globe to determine your location by means of satellites.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
An adult's resting heart rate is between 60 and 100 beats per minute.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
To replace the battery of the Crivit 1-LD4497 sport watch, follow these steps: 1. Remove the screws from the back of the watch using a small Phillips screwdriver. 2. Take off the caseback and the battery sticker. 3. Use a small, flat tool to open the latch of the battery holder. 4. Remove the old battery and insert a new 3V CR2032 battery with the positive terminal facing upwards. 5. Ensure the gasket is correctly seated and close the latch of the battery holder. 6. Replace the battery sticker, the caseback, and the screws. Remember, if you prefer, a watchmaker can also perform the battery replacement along with a water resistance test.
To reset the Crivit 1-LD4497 sport watch, follow these steps: 1. Press and hold the SET and SEL buttons simultaneously. 2. The display will show "EINSTELLEN/HOLD TO SET" and the 12 or 24-hour selection will blink. 3. Continue with the basic settings as described in the manual for setting up the watch. 4. Exit the setting mode by pressing the MODE button. Note: Pressing SET and SEL together is the only way to totally reset the watch, including changing the language and units of measurement.
Yes, the manual of the Crivit 1-LD4497 IAN 285066 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Crivit and is the answer not in the manual?
Question and answer
Number of questions: 0