Crivit 1-LD3604-3 manual

Crivit 1-LD3604-3
7.2 · 3
PDF manual
 · 51 pages
English
manualCrivit 1-LD3604-3

IAN 94528

Herzfrequenz-Messuhr 9/2013
Art.-Nr.: 1-LD3604-1, 1-LD3604-2, 1-LD3604-3

Herzfrequenz-Messuhr

Bedienungs- und Sicherheitshinweise

Montre cardio-

fréquencemètre

Mode d‘emploi

Orologio

da polso

con cardiofrequenzimetro

Istruzioni per l’uso e per la sicurezza
H

Heart Rate Monitor

Usage and safety instructions
Bedienungs- und Sicherheitshinweise...............................................- 1
-
Utilisation et avertissements de sécurité.................................................. - 26
-
Istruzioni per l’uso e per la sicurezza............................................. - 51
-
Usage and safety instructions .................................................................... - 75
-

View the manual for the Crivit 1-LD3604-3 here, for free. This manual comes under the category sport watches and has been rated by 3 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Crivit 1-LD3604-3 or do you need help? Ask your question here

Need help?

Do you have a question about the Crivit and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCrivit
Model1-LD3604-3
Productsport watch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crivit 1-LD3604-3 below.

Do I need to switch off my sport watch at night?

It is sensible for you to switch off your sport watch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

How high is an adult's heart rate at rest?

An adult's resting heart rate is between 60 and 100 beats per minute.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I troubleshoot if the heart rate monitor of the Crivit 1-LD3604-3 sport watch is not displaying accurate readings?

To troubleshoot if the heart rate monitor of the Crivit 1-LD3604-3 sport watch is not displaying accurate readings, you can follow these steps: 1. Ensure proper contact: Make sure the chest belt is securely fastened around your chest, just below the chest muscles. The electrodes on the chest belt should be in direct contact with your skin. 2. Moisture and cleanliness: Before using the heart rate monitor, ensure that both the chest belt and the watch strap are clean and dry. Sweat and contaminants can interfere with the sensor's function. Clean the heart rate monitor with a soft, dry, lint-free cloth, and use lukewarm mild soap water to clean the chest belt. Dry all parts thoroughly. 3. Positioning: Check the positioning of the heart rate monitor on your wrist. It should be snug but not too tight. Adjust the strap if necessary to ensure a proper fit. 4. Battery level: Check the battery level of the heart rate monitor. If the battery is low, replace it with a new one to ensure accurate readings. 5. Interference: Avoid using the heart rate monitor near strong electromagnetic fields or other devices that may cause interference. This can affect the accuracy of the readings. By following these troubleshooting steps, you should be able to address any issues with the heart rate monitor not displaying accurate readings on your Crivit 1-LD3604-3 sport watch.

Why is the light function not working on my Crivit 1-LD3604-3 sport watch?

If the light function is not working on your Crivit 1-LD3604-3 sport watch, you can try the following troubleshooting steps: 1. Check the battery: Ensure that the watch has sufficient battery power. If the battery is low, replace it with a new one. 2. Activate the light function: Press the LIGHT button briefly to activate the temporary backlighting. Make sure you press the button firmly and release it quickly. 3. Check the settings: Verify that the light function is enabled in the watch settings. Navigate to the settings menu and look for an option related to the backlight or light function. Ensure that it is turned on. 4. Reset the watch: If the above steps do not resolve the issue, try resetting the watch to its factory settings. Refer to the manual for instructions on how to perform a reset. 5. Contact customer support: If the light function still does not work after trying the above steps, it is recommended to contact the customer support of Crivit for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. By following these steps, you should be able to troubleshoot and resolve the issue with the light function on your Crivit 1-LD3604-3 sport watch.

How can I troubleshoot if the time and basic settings of my Crivit 1-LD3604-3 sport watch are not functioning properly?

To troubleshoot if the time and basic settings of your Crivit 1-LD3604-3 sport watch are not functioning properly, you can follow these steps: 1. Check the battery: Ensure that the watch has sufficient battery power. If the battery is low, replace it with a new one. 2. Access the time and basic settings: Press the MODE button to select the time and basic settings mode on your watch. 3. Set the time: Use the SEL button to navigate through the settings and press SET to confirm each setting. Set the seconds, minutes, hours, year, month, and day according to your preference. 4. Configure additional settings: After setting the basic time, you can configure additional settings such as the alarm, timer, and second time zone. Use the SEL button to navigate through the options and press SET to confirm your settings. 5. Exit the setting mode: Once you have finished configuring the time and basic settings, press the MODE button to exit the setting mode and return to the normal display. If the time and basic settings are still not functioning properly after following these steps, it is recommended to contact the customer support of Crivit for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary.

Why is the second time zone not displaying correctly on my Crivit 1-LD3604-3 sport watch?

If the second time zone is not displaying correctly on your Crivit 1-LD3604-3 sport watch, you can try the following troubleshooting steps: 1. Check the time zone settings: Ensure that you have correctly set the time zone for the second time zone. Use the settings menu to navigate to the time zone settings and verify that the correct time zone is selected. 2. Adjust the time difference: If the second time zone is displaying the incorrect time, check if you have correctly adjusted the time difference between the primary time zone and the second time zone. Use the settings menu to navigate to the time difference settings and make the necessary adjustments. 3. Verify the daylight saving time settings: If the second time zone is affected by daylight saving time, ensure that you have enabled or disabled the daylight saving time setting correctly. Use the settings menu to navigate to the daylight saving time settings and adjust them accordingly. 4. Reset the watch: If the above steps do not resolve the issue, try resetting the watch to its factory settings. Refer to the manual for instructions on how to perform a reset. 5. Contact customer support: If the second time zone still does not display correctly after trying the above steps, it is recommended to contact the customer support of Crivit for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. By following these steps, you should be able to troubleshoot and resolve the issue with the second time zone display on your Crivit 1-LD3604-3 sport watch.

What should I do if the alarm function of my Crivit 1-LD3604-3 sport watch is not working as expected?

If the alarm function of your Crivit 1-LD3604-3 sport watch is not working as expected, you can try the following troubleshooting steps: 1. Check the alarm settings: Ensure that you have correctly set the alarm time and enabled the alarm function. Use the settings menu to navigate to the alarm settings and verify that the alarm time is set correctly and the alarm function is turned on. 2. Adjust the volume: If the alarm sound is too low or not audible, check the volume settings of the watch. Use the settings menu to navigate to the volume settings and increase the volume level. 3. Test the alarm: Set the alarm to a specific time and wait for the designated time to see if the alarm activates. Make sure that the watch is not in silent mode or muted. 4. Check the battery: Ensure that the watch has sufficient battery power. If the battery is low, replace it with a new one as a low battery can affect the alarm function. 5. Reset the watch: If the above steps do not resolve the issue, try resetting the watch to its factory settings. Refer to the manual for instructions on how to perform a reset. If the alarm function still does not work as expected after trying the above steps, it is recommended to contact the customer support of Crivit for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary.

How do I troubleshoot if the heart rate monitor of the Crivit 1-LD3604-3 sport watch is not displaying accurate readings?

To troubleshoot if the heart rate monitor of the Crivit 1-LD3604-3 sport watch is not displaying accurate readings, follow these steps: 1. Ensure that the heart rate monitor is clean and free from sweat and contaminants. Use a soft, dry, lint-free cloth or a glasses cleaning cloth to clean the monitor. Clean the chest belt and watch strap with lukewarm mild soap water and dry them with a towel. 2. Make sure the chest belt is properly positioned and securely fastened around your chest. Adjust the strap if necessary to ensure a snug fit. 3. Check the battery level of the heart rate monitor. If the battery is low, replace it with a new CR2032 battery. 4. Ensure that the heart rate monitor is in direct contact with your skin. Moistening the electrodes on the chest belt can improve the contact. 5. Check if the heart rate monitor is properly synced with the watch. Follow the instructions in the manual to pair the chest belt with the watch. 6. If the readings are still inaccurate, try resetting the heart rate monitor and watch. Refer to the manual for instructions on how to perform a reset. By following these troubleshooting steps, you should be able to resolve any issues with the accuracy of the heart rate monitor on the Crivit 1-LD3604-3 sport watch.

What should I do if the light function of the Crivit 1-LD3604-3 sport watch is not working?

If the light function of the Crivit 1-LD3604-3 sport watch is not working, you can try the following steps to troubleshoot the issue: 1. Check the battery level of the watch. If the battery is low, replace it with a new one. Refer to the manual for instructions on how to replace the battery. 2. Ensure that the watch is not in power-saving mode. Press any button to activate the display and check if the light function is working. 3. Make sure you are using the correct button to activate the light function. Look for a dedicated button labeled "LIGHT" or a symbol that represents the light function. Press and hold this button to see if the light turns on. 4. Verify that the watch is not in a mode that disables the light function. Navigate through the watch's menu and settings to ensure that the light function is enabled. 5. If none of the above steps resolve the issue, perform a reset of the watch. This will restore the default settings and may fix any software-related problems. Refer to the manual for instructions on how to perform a reset. By following these troubleshooting steps, you should be able to resolve the issue with the light function of the Crivit 1-LD3604-3 sport watch.

How can I troubleshoot if the time and basic settings of the Crivit 1-LD3604-3 sport watch are not saving or adjusting properly?

To troubleshoot if the time and basic settings of the Crivit 1-LD3604-3 sport watch are not saving or adjusting properly, follow these steps: 1. Press the MODE button to select the "ZEIT/TIME" feature on the watch. 2. Press and hold the SET button for 3 seconds to enter the setting mode. 3. Look for the "EINSTELLEN/HOLD TO SET" message on the display. If the 12 or 24-hour selection is blinking, it means you are in the correct mode. 4. Use the SEL button to navigate through the settings and select the one you want to adjust, such as seconds, minutes, hours, year, month, or day. 5. Once you have selected the desired setting, press the SET button to confirm your selection. 6. Set the value for each setting by using the SEL button to increase or decrease the value, and confirm each digit by pressing the SET button. 7. If you encounter issues with the basic settings, such as birthday, weight, or height, follow the same steps to adjust these settings. 8. Exit the setting mode by pressing the MODE button. By following these troubleshooting steps, you should be able to save and adjust the time and basic settings of the Crivit 1-LD3604-3 sport watch properly.

What should I do if the alarm on the Crivit 1-LD3604-3 sport watch is not sounding at the set time?

To troubleshoot if the alarm on the Crivit 1-LD3604-3 sport watch is not sounding at the set time, follow these steps: 1. Press and hold the SET button for 3 seconds to enter the alarm setting mode. 2. Look for the "EINSTELLEN/HOLD TO SET" message on the display. If the minutes of the alarm time are blinking, it means you are in the correct mode. 3. Use the SEL button to navigate through the settings and select the alarm time you want to adjust, such as hours and minutes. 4. Once you have selected the desired alarm time, press the SET button to confirm your selection. 5. Check if the alarm is enabled. Look for the alarm symbol (•)) on the display. If it is not visible, press the SET button to activate the alarm. 6. If the alarm is already enabled and set correctly, but still not sounding, check the volume settings of the watch. Make sure the volume is not muted or set too low. 7. If the issue persists, try resetting the alarm. Press and hold the SET button for 3 seconds to enter the alarm setting mode, and then press the SEL button to select the alarm you want to reset. Press the SET button to confirm the reset. By following these troubleshooting steps, you should be able to resolve the issue with the alarm on the Crivit 1-LD3604-3 sport watch not sounding at the set time.

How do I troubleshoot if the speed setting feature of the Crivit 1-LD3604-3 sport watch is not functioning correctly?

To troubleshoot if the speed setting feature of the Crivit 1-LD3604-3 sport watch is not functioning correctly, follow these steps: 1. Press the MODE button to select the "ZEIT/TIME" feature on the watch. 2. Press and hold the SET button for 3 seconds to enter the setting mode. 3. Look for the "EINSTELLEN/HOLD TO SET" message on the display. If the speed setting is one of the subfeatures, navigate to it by pressing the SEL button. 4. Use the SEL button to select the speed setting feature. 5. Press and hold the SEL button to activate the speed setting mode. The current speed will be displayed on the middle row of the watch. 6. Adjust the speed setting by pressing the SEL button to increase or decrease the value. Confirm the setting by pressing the SET button. 7. If the speed setting is not functioning correctly, try resetting the watch. Press and hold the SET button for 3 seconds to enter the setting mode, and then navigate to the speed setting feature. Press the SET button to reset the speed setting. By following these troubleshooting steps, you should be able to resolve any issues with the speed setting feature of the Crivit 1-LD3604-3 sport watch.

Is the manual of the Crivit 1-LD3604-3 available in English?

Yes, the manual of the Crivit 1-LD3604-3 is available in English .

Is your question not listed? Ask your question here

No results