Crivit 1-LD3473 manual

Crivit 1-LD3473
7.6 · 2
PDF manual
 · 48 pages
English
manualCrivit 1-LD3473

IAN 87794

Herzfrequenz-Messuhr 1/2013 · Art.-Nr.: 1-LD3473

Herzfrequenz-Messuhr

Bedienungs- und Sicherheitshinweise

Montre cardio-

fréquencemètre

Mode d‘emploi

Orologio da polso

con cardiofrequenzimetro

Istruzioni per l’uso e per la sicurezza

Heart Rate Monitor

Usage and safety instructions
Bedienungs- und Sicherheitshinweise ....................................- 1 -
Utilisation et avertissements de sécurité.......................................... - 24 -
Istruzioni per l’uso e per la sicurezza............................................. - 47 -
Usage and safety instructions .................................................................... - 70 -

View the manual for the Crivit 1-LD3473 here, for free. This manual comes under the category treadmill and has been rated by 2 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Crivit 1-LD3473 or do you need help? Ask your question here

Need help?

Do you have a question about the Crivit and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
S
stefan karlssonAugust 21, 2015

why dont you have any instructions in swedish i cant get my clock and heart belt to work

General
BrandCrivit
Model1-LD3473
Producttreadmill
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crivit 1-LD3473 below.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

How do I start the Crivit 1-LD3473 treadmill?

To start the Crivit 1-LD3473 treadmill, follow these steps: 1. Make sure the treadmill is plugged into a power source and the power switch is turned on. 2. Stand on the side rails of the treadmill and ensure that the safety key is securely attached to your clothing. 3. Locate the control panel on the treadmill console. It should display various buttons and a display screen. 4. Press the "Start" button on the control panel to activate the treadmill. 5. The display screen will show the current speed and other relevant information. 6. To adjust the speed, use the "+" and "-" buttons on the control panel. Press "+" to increase the speed and "-" to decrease it. 7. Start walking or running on the treadmill at a comfortable pace. 8. To stop the treadmill, press the "Stop" button on the control panel. The treadmill will gradually slow down and come to a complete stop. Remember to always follow the safety instructions provided in the manual to ensure a safe and effective workout on the Crivit 1-LD3473 treadmill.

Why is the treadmill not turning on?

If the Crivit 1-LD3473 treadmill is not turning on, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the treadmill is properly plugged into a power outlet and that the power switch is turned on. 2. Verify the safety key: Make sure that the safety key is securely attached to your clothing and properly inserted into the treadmill console. The treadmill will not turn on if the safety key is not in place. 3. Check the circuit breaker: If the treadmill is plugged into a power strip or surge protector, check if the circuit breaker has tripped. Reset the circuit breaker if necessary. 4. Inspect the power cord: Examine the power cord for any visible damage or loose connections. If there are any issues, contact customer support for assistance. 5. Test a different outlet: Try plugging the treadmill into a different power outlet to rule out any issues with the current outlet. If the treadmill still does not turn on after following these steps, it is recommended to contact customer support for further assistance.

How do I adjust the speed of the treadmill?

To adjust the speed of the Crivit 1-LD3473 treadmill, follow these steps: 1. Locate the control panel on the treadmill console. It should display various buttons and a display screen. 2. Look for the speed adjustment buttons on the control panel. These buttons are usually labeled with "+" and "-" symbols. 3. Press the "+" button to increase the speed of the treadmill. Each press will incrementally increase the speed. 4. Press the "-" button to decrease the speed of the treadmill. Each press will incrementally decrease the speed. 5. Monitor the display screen to see the current speed setting. The display screen will show the speed in units such as kilometers per hour (km/h) or miles per hour (mph). 6. Adjust the speed according to your desired pace. Increase the speed for a faster workout or decrease the speed for a slower workout. 7. Start walking or running on the treadmill at the adjusted speed. Remember to always start at a comfortable speed and gradually increase or decrease the speed as needed. It is important to listen to your body and exercise within your limits.

What should I do if the treadmill belt is slipping?

If the treadmill belt of the Crivit 1-LD3473 is slipping, you can try the following steps to address the issue: 1. Check the belt tension: Ensure that the treadmill belt is properly tensioned. If it is too loose, it may slip during use. Refer to the manual for instructions on how to adjust the belt tension. 2. Lubricate the belt: Insufficient lubrication can cause the belt to slip. Apply treadmill belt lubricant according to the manufacturer's instructions. This will help reduce friction and improve the grip of the belt. 3. Clean the belt and deck: Dust, dirt, and debris can accumulate on the belt and deck, affecting the traction. Regularly clean the belt and deck using a soft cloth or brush to remove any debris. 4. Check the motor drive belt: The motor drive belt connects the motor to the treadmill belt. If it is loose or worn out, it can cause slipping. Inspect the motor drive belt and tighten or replace it if necessary. 5. Verify the speed settings: Ensure that the treadmill is not set to a speed that exceeds the capabilities of the belt. Adjust the speed settings to a suitable level for your workout. If the issue persists after following these steps, it is recommended to contact customer support for further assistance.

How do I calculate calories burned, fat burn, and BMI on the treadmill?

To calculate calories burned, fat burn, and BMI on the Crivit 1-LD3473 treadmill, follow these steps: 1. Press the "SET" button on the treadmill console to enter the settings mode. 2. Use the "SEL" button to navigate to the desired display mode. Press "SET" to select the mode. 3. To calculate calories burned, the display will show the burned calories in units such as kilocalories (kcal) or calories (cal). Press and hold the "SET" button to reset the values. 4. To calculate fat burn, the display will show the amount of fat burned in grams (g). Note that the fat burn counter is only activated when your heart rate is above 120 beats per minute. Press and hold the "SET" button to reset the values. 5. To calculate BMI (Body Mass Index), the display will show your BMI value. BMI is a statistical measurement used to judge a person's weight relative to their height. Values between 18.5 and 25 are considered normal for adults. Press and hold the "SET" button to reset the values. Remember to set your age and weight correctly to ensure accurate calorie and fat burn calculations. Please note that these calculations are provided as a guideline and may not take into account individual body composition and other factors.

Is the manual of the Crivit 1-LD3473 available in English?

Yes, the manual of the Crivit 1-LD3473 is available in English .

Is your question not listed? Ask your question here

No results