Crestron TPS-4LW manual

Crestron TPS-4LW
9.9 · 1
PDF manual
 · 36 pages
English
manualCrestron TPS-4LW

Crestron Isys

®
TPS-4L 3.6-Inch Wall Mount Touchpanel

Setup Menu

SETUP MENU
To obtain the SETUP MENU, shown to the left, press the Setup button from the
MAIN MENU. The SETUP MENU offers a series of buttons, which open additional
menus and screens that are detailed in subsequent paragraphs. After setup parameters
have been set, select the Return button to return to the MAIN MENU.
NOTE: For convenience, the current CRESNET ID setting is displayed in the lower
left corner.
NOTE: All touchpanel settings are automatically saved in non-volatile memory.

Interface

INTERFACE MENU
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
parameters, first select the Interface button on the SETUP MENU to display the
INTERFACE MENU screen, shown to the left. Then, use the CRESNET ID UP and
DOWN buttons to set the Cresnet network identity (CRESNET ID).
Use the other buttons on the screen to enable/disable the preferred communications
protocol: Cresnet II, Ethernet, or CIP (Crestron Internet Protocol).
Cresnet II buttons determine the touchpanel’s communication mode. Select Enable
for normal Cresnet communications (default); select Disable to disable the Cresnet
communications interface.
The Ethernet Enable and Disable buttons determine the touchpanel’s ability to
communicate with other devices via Ethernet.
The CIP Enable and Disable buttons determine the touchpanel’s ability to
communicate with other Crestron devices using CIP. CIP must be enabled for the
touchpanel to communicate with other Crestron Ethernet devices.
After the Cresnet ID setting has been verified and the communications protocol has
been selected, press Return to save the settings and return to the SETUP MENU.
AUDIO MENU

Audio

From the SETUP MENU, press the Audio button to open the AUDIO MENU
screen, shown at left.
Press the WAV button to open the AUDIO SETUP – WAV screen. Use the buttons
on this screen to set the WAV file volume level, to enable/disable the WAV file
function and to play the WAV file to verify your settings. The area to the right of the
volume UP/DOWN buttons shows the relative volume from 0% to 100%, both as a
numeric value and, for a quick visual reference, as an analog bar.
Similarly, press the KEY CLICK Enabled/Disabled button to open the AUDIO
SETUP – KEY CLICK screen. Use the buttons on this screen to adjust the key click
volume level (0 – 100%), and to enable/disable an audible tone (beep) when the
touchpanel buttons are pressed. The area to the right of the volume UP/DOWN
buttons shows the relative volume from 0% to 100%, both as a numeric value and,
for a quick visual reference, as an analog bar.
Press the Restore Default Audio Settings button to cancel any changes and restore
all default audio settings: WAV volume = 100%, and WAV function enabled; key
click volume = 100%, and key click function enabled.
Press Return to save the settings and return to the SETUP MENU.
Operations & Installation Guide – DOC. 6449A 3.6-Inch Wall Mount Touchpanel:
TPS-4L 9

Manual

View the manual for the Crestron TPS-4LW here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Crestron TPS-4LW or do you need help? Ask your question here

Need help?

Do you have a question about the Crestron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Crestron TPS-4LW specifications

Below you will find the product specifications and the manual specifications of the Crestron TPS-4LW.

General
BrandCrestron
ModelTPS-4LW | TPS-4LW
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal3.6 "
Display typeTFT
Display resolution320 x 240 pixels
Display brightness300 cd/m²
Touchscreen technologyResistive
Backlight typeLED
Aspect ratio4:3
Color depth16 bit
Contrast ratio300:1
Viewing angle, horizontal160 °
Viewing angle, vertical130 °
Display diagonal3.6 "
Display typeTFT
Display resolution320 x 240 pixels
Touchscreen technologyResistive
Aspect ratio4:3
Color depth16 bit
Contrast ratio300:1
Viewing angle, horizontal160 °
Viewing angle, vertical130 °
Ports & interfaces
RJ-45 ports quantity1
Ethernet LANYes
Wi-FiNo
Power
Power consumption (typical)5 W
Operational conditions
Operating relative humidity (H-H)0 - 40 %
Operating temperature (T-T)10 - 90 °C
Audio
Built-in speaker(s)Yes
Audio formats supportedWAV
Certificates
CertificationCE
Weight & dimensions
Width157.3 mm
Depth53.6 mm
Height115.2 mm
Weight430 g
Width157.3 mm
Depth53.6 mm
Height115.2 mm
Weight430 g
Performance
Mounting typeIn wall
Ethernet LANYes
Ethernet LAN data rates10, 100 Mbit/s
Cabling technology10/100Base-T(X)
Wi-FiNo
Supported network protocolsDHCP
Internal memory8 MB
RAM capacity16 MB
Product colorWhite
Housing materialPlastic
Operating relative humidity (H-H)0 - 40 %
Operating temperature (T-T)10 - 90 °C
Design
CertificationCE
Product colorWhite
Housing materialPlastic
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crestron TPS-4LW below.

What is the weight of the Crestron TPS-4LW?

The Crestron TPS-4LW has a weight of 430 g.

What certifications does the Crestron TPS-4LW have?

The Crestron TPS-4LW has the following certifications: CE.

What is the screen size of the Crestron TPS-4LW?

The screen size of the Crestron TPS-4LW is 3.6 ".

What is the height of the Crestron TPS-4LW?

The Crestron TPS-4LW has a height of 115.2 mm.

What is the screen resolution of the display of the Crestron TPS-4LW?

The screen resolution of the Crestron TPS-4LW is 320 x 240 pixels.

What is the width of the Crestron TPS-4LW?

The Crestron TPS-4LW has a width of 157.3 mm.

What is the depth of the Crestron TPS-4LW?

The Crestron TPS-4LW has a depth of 53.6 mm.

Is the manual of the Crestron TPS-4LW available in English?

Yes, the manual of the Crestron TPS-4LW is available in English .

Is your question not listed? Ask your question here

No results