Crestron TPS-4000 manual

Crestron TPS-4000
9.8 · 1
PDF manual
 · 48 pages
English
manualCrestron TPS-4000

Crestron Isys

®
TPS-4000 10.4 Inch Tilt Touchpanel
NOTE: All network wiring must consist of two twisted pairs. One twisted pair is
the +24V conductor and the GND conductor. The other twisted pair is the Y and Z
conductors.
NOTE: When daisy-chaining Cresnet units, strip the ends of the wires carefully to
avoid nicking the conductors. Twist together the ends of the wires that share a pin on
the network connector, and tin the twisted connection. Apply solder only to the ends
of the twisted wires. Avoid tinning too far up the wires or the end becomes brittle.
Insert the tinned connection into the Cresnet connector and tighten the retaining
screw. Repeat the procedure for the other three conductors.
NOTE: For larger networks (i.e., greater than 28 network devices), it may become
necessary to add a Cresnet Hub/Repeater (CNXHUB) or Cresnet Network Poll
Accelerator (C2N-NPA8) to maintain signal quality throughout the network. Also,
for networks with lengthy cable runs, it may be necessary to add a Hub/Repeater
after only 20 devices.

Identity Code

All equipment and user interfaces within the network require a unique identity code
(Net ID). These codes are two-digit hexadecimal numbers ranging from 03 to FE.
Refer to “Interface Menu” on page 10 for instructions on setting the unit's Net ID.
The Net ID of each unit must match an ID code specified in the SIMPL Windows
program. Refer to “Setting the Net ID in Device Settings” on page 19 for details of
the SIMPL Windows procedure.

Configuring the Touchpanel

NOTE: The only connection required to configure the touchpanel is power (+24V
and Ground). Refer to “Hardware Hookup” on page 14 for details.
MAIN MENU
This menu can also be obtained via
digital reserved join number, 17242.
To configure the unit, it may be necessary to access a series of setup screens prior to
viewing run-time screens that are loaded into the touchpanel for normal operation.
The MAIN MENU for configuring the touchpanel appears when a finger is held to
the touchscreen as power is applied. Remove your finger when the MAIN MENU
appears.
NOTE: The SETUP MODE can also be accessed through the Viewport Utility if the
touchpanel is connected to a control system via Cresnet or to a PC via RS-232 by
selecting Functions | Put Touch Panel into Setup Mode… from the Viewport
menu.
Upon entering SETUP MODE, the MAIN MENU, shown to the left, displays four
buttons: Touch Screen Calibration, Exit and Run Program, Setup, and
Diagnostics.
The Exit and Run Program button verifies that all of the setup information has
been saved to EEPROM and displays the main page that has been programmed into
your system. The remaining buttons on the MAIN MENU open other menus, which
are discussed in subsequent paragraphs.
Operations Guide - DOC. 6268 10.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-4000 9

Manual

View the manual for the Crestron TPS-4000 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Crestron TPS-4000 or do you need help? Ask your question here

Need help?

Do you have a question about the Crestron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Crestron TPS-4000 specifications

Below you will find the product specifications and the manual specifications of the Crestron TPS-4000.

The not categorized Crestron TPS-4000 features a 10.4-inch TFT display with a resolution of 640 x 480 pixels. The display brightness is 450 cd/m², with a contrast ratio of 600:1. The touchscreen technology used is resistive, providing ease of use. It has an aspect ratio of 4:3 and a color depth of 18 bit. The viewing angles are 70° horizontally and 55° vertically. Additionally, it is equipped with built-in speakers for audio output. The TPS-4000 is designed for in tabletop mounting, offering a convenient setup option. However, it does not have Wi-Fi connectivity capabilities, limiting its wireless functionality. Overall, the product provides a standard display size and resolution suitable for various applications. Please note that the information provided above is based solely on the technical specifications of the Crestron TPS-4000 and does not include any additional subjective opinions or evaluations.

General
BrandCrestron
ModelTPS-4000 | TPS-4000
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal10.4 "
Display typeTFT
Display resolution640 x 480 pixels
Display brightness450 cd/m²
Touchscreen technologyResistive
Aspect ratio4:3
Color depth18 bit
Contrast ratio600:1
Viewing angle, horizontal70 °
Viewing angle, vertical55 °
Audio
Built-in speaker(s)Yes
Number of speakers2
Speaker power2 W
Performance
Mounting typeIn tabletop
Wi-FiNo
Product colorBlack
RAM capacity8 MB
Internal memory8 MB
Operational conditions
Operating relative humidity (H-H)10 - 90 %
Operating temperature (T-T)10 - 45 °C
Weight & dimensions
Width278.3 mm
Depth236.7 mm
Height254.8 mm
Weight2110 g
Ports & interfaces
RJ-45 ports quantity1
Power
Power consumption (typical)22 W
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crestron TPS-4000 below.

What is the weight of the Crestron TPS-4000?

The Crestron TPS-4000 has a weight of 2110 g.

What is the screen size of the Crestron TPS-4000?

The screen size of the Crestron TPS-4000 is 10.4 ".

What is the height of the Crestron TPS-4000?

The Crestron TPS-4000 has a height of 254.8 mm.

What is the screen resolution of the display of the Crestron TPS-4000?

The screen resolution of the Crestron TPS-4000 is 640 x 480 pixels.

What is the width of the Crestron TPS-4000?

The Crestron TPS-4000 has a width of 278.3 mm.

What is the depth of the Crestron TPS-4000?

The Crestron TPS-4000 has a depth of 236.7 mm.

Is the manual of the Crestron TPS-4000 available in English?

Yes, the manual of the Crestron TPS-4000 is available in English .

Is your question not listed? Ask your question here

No results